An instant Lube Room, this premium configuration incorporates best of class features.

SPECIFICATIONS
Number of containers: 4 x 65 Gallon,

An instant Lube Room, this premium configuration incorporates best of class features.

SPECIFICATIONS
Number of containers: 4 x 30 Gallons,

An instant Lube Room, this premium configuration incorporates best of class features.

SPECIFICATIONS
Dedicated Pump and Filter Per Tank - to prevent cross contamination of lubricants and ensure maximum cleanliness , Spill Containment - built in spill containment for EPA and SPCC compliance , Flame Resistant - Fire suppression hose assemblies MSHA CFR30 rated, 12 Gauge Aluminized Tanks, Two Tanks, 2...

An instant Lube Room, this premium configuration incorporates best of class features.

SPECIFICATIONS
Number of containers: 4 x 65gal, 2 x 120gal,

An instant Lube Room, this premium configuration incorporates best of class features.

SPECIFICATIONS
Number of containers: 4 x 120 Gallons,

An instant Lube Room, this premium configuration incorporates best of class features.

SPECIFICATIONS
Number of containers: 4 x 30 gallons,

An instant Lube Room, this premium configuration incorporates best of class features.

SPECIFICATIONS
Number of containers: 8,

An instant Lube Room, this premium configuration incorporates best of class features.

SPECIFICATIONS
Direct Mount Overfill Alarm

An instant Lube Room, this premium configuration incorporates best of class features.

SPECIFICATIONS
Electrical Panel Stainless Cover

An instant Lube Room, this premium configuration incorporates best of class features.

SPECIFICATIONS
Hose Reel Upgrade - 25'

An instant Lube Room, this premium configuration incorporates best of class features.

SPECIFICATIONS
Number of containers: 4 x 120 Gallons,

An instant Lube Room, this premium configuration incorporates best of class features.

SPECIFICATIONS
Number of containers: 6 x 120 Gallons,

An instant Lube Room, this premium configuration incorporates best of class features.

SPECIFICATIONS
- All tanks are Color Coated Containers with Level Gauges, and tank fittings. All Containers are TGIC Polyester Powder Coated, and constructed of 12 Gauge Aluminized Steel., - 3-Way Product Diverter Valve Assemblies to allow Product to be pumped through the Filters into the Containers, and then pulled back...

An instant Lube Room, this premium configuration incorporates best of class features.

SPECIFICATIONS
All tanks are Color Coated Containers with Level Gauges, and tank fittings. All Containers are TGIC Polyester Powder Coated, and constructed of aluminum., 3-Way Product Diverter Valve Assemblies to allow Product to be pumped through the Filters into the Containers, and then pulled back out of the...

SPECIFICATIONS
1-1/2 motor only (no pump), see part 741057 for complete unit

55-gallon drums were okay in their day, but there is a better way to handle all kinds of oils, lubricants and industrial fluids that`s easier, safer, cleaner, and more cost efficient. Inefficient transfer of product can not only lead to safety problems, it can also result in increased clean-up, labor costs,...

SPECIFICATIONS
Number of containers: 10, 1 x timer controlled, positive displacement transfer unit consisting of:, 1 - 1 HP 110 volt electric motor, 1 - 1/2" NPT gear pump, 1 - 8' long x 1" I.D. reinforced PVC Suction hose with suction tube, 1 - 6' long x 1" PVC discharge hose with quick...

55-gallon drums were okay in their day, but there is a better way to handle all kinds of oils, lubricants and industrial fluids that`s easier, safer, cleaner, and more cost efficient. Inefficient transfer of product can not only lead to safety problems, it can also result in increased clean-up, labor costs,...

SPECIFICATIONS
Number of containers: 16, Size of containers: 250 liters (65 gallons), Height: 4.06 meters (160"), Width: 2.56 meters (101"), Space Required: 2.80 sq m (30.2 sq ft), Weight: 585 kg (1290 lb), NOTE: THIS SYSTEM INCLUDES SPILL CONTAINMENT PANS

55-gallon drums were okay in their day, but there is a better way to handle all kinds of oils, lubricants and industrial fluids that`s easier, safer, cleaner, and more cost efficient. Inefficient transfer of product can not only lead to safety problems, it can also result in increased clean-up, labor costs,...

SPECIFICATIONS
15 - 65 Gallon Rectangular Mild Steel Containers with PVC Sight Gauge Assemblies, 3/4" Outlet Fittings and Air Vents, 1 - 65 Gallon Rectangular Stainless Steel Containers with PVC Sight Gauge Assemblies, 3/4" Outlet Fittings and Air Vents, 12 - 3/4" NPT Valve Arrangements with 3/4" NPT...

55-gallon drums were okay in their day, but there is a better way to handle all kinds of oils, lubricants and industrial fluids that`s easier, safer, cleaner, and more cost efficient.

SPECIFICATIONS
2 - 65 Gallon Rectangular Mild Steel Containers with PVC Sight Gauge Assemblies, ¾” Outlet Fittings and Air Vents, 2 - ¾” NPT Valve Arrangements with ¾” NPT Self Closing Faucets, 1 - Timer Controlled, Positive Displacement Transfer Unit consisting of:, 1 – 1-1/2 HP 110 Volt Electric Motor,...

55-gallon drums were okay in their day, but there is a better way to handle all kinds of oils, lubricants and industrial fluids that`s easier, safer, cleaner, and more cost efficient. Inefficient transfer of product can not only lead to safety problems, it can also result in increased clean-up, labor costs,...

SPECIFICATIONS
Number of containers: 2, Size of containers: 150 gallons, 2 - 3-Way Product Diverter Valve Assemblies to allow Product to be Pumped through the Filters into the Containers, and then pulled back out of the Containers, through the Filters with the transfer Units. Product can also be pulled from the...

55-gallon drums were okay in their day, but there is a better way to handle all kinds of oils, lubricants and industrial fluids that`s easier, safer, cleaner, and more cost efficient. Inefficient transfer of product can not only lead to safety problems, it can also result in increased clean-up, labor costs,...

SPECIFICATIONS
Number of containers: 2, Size of containers: 250 liters (65 gallons), Number of pumps: 2, Control Handles:2, Height: 2.64 meters (104"), Width: 1.26 meters (50"), Depth: 1.09 meters (43"), Weight: 150 kg (330 lb)

250 Gallon (950 litre) double-wall rectangular bulk storage tank. This unit is built to UL-142 specifications and has 2 each 4" emergency vents, 2 each 2" t-vent outlets, and 1 each 4" fill cap with vent kit. The unit also comes with a overfill prevention valve, air driven pump and audible...

SPECIFICATIONS
Width: 36" (91 cm), Heigth: 48" (122 cm), Length: 48" (122 cm), Weigth: 570 lbs (260 kgs), Capacity: 250 Gallons (950 litres)

55-gallon drums were okay in their day, but there is a better way to handle all kinds of oils, lubricants and industrial fluids that`s easier, safer, cleaner, and more cost efficient.

SPECIFICATIONS
3 - 15 Gallon Steel Rectangular Containers with PVC Sight Gauge Assemblies, ¾" Outlet Fittings and Air Vents. Container Dimensions Will be 22" Wide x 22" High x 18" Long and will Mount on Vertical Brackets to Connect to the Crossbeams, 3 - ¾" NPT Valve Arrangements with ¾" NPT Self...

For use with specialty products package and stainless steel tanks arrangements.

IFH highly recommends the pruchase of a complete storage rack solution for warranty and liability purposes. We understand that some individuals may simply wish to purchase the containers alone, and build a system, but when you consider the time it takes to plan, design, and procure additional components, the...

SPECIFICATIONS
30 Gallon Steel container, TANK ASSY 30 STL W/ 1-1/2 OUT, This part is container only and includes no mounting brackets., NOTE: STORAGE OF PRODUCT WITH A FLASH POINT LESS THAN 150°F IS STRICTLY PROHIBITED

55-gallon drums were okay in their day, but there is a better way to handle all kinds of oils, lubricants and industrial fluids that`s easier, safer, cleaner, and more cost efficient. Inefficient transfer of product can not only lead to safety problems, it can also result in increased clean-up, labor costs,...

SPECIFICATIONS
4 - 65 Gallon Rectangular Mild Steel Containers with Industrial Grade PVC Sight Gauge Assemblies, 2-3/4" Inlet and Outlet Fittings and Desiccant Breathers., 4 - 3-Way Product Diverter Valve Assemblies to allow Product to be Pumped through the Filters into the Containers, and then Pulled back out of the...

55-gallon drums were okay in their day, but there is a better way to handle all kinds of oils, lubricants and industrial fluids that`s easier, safer, cleaner, and more cost efficient. Inefficient transfer of product can not only lead to safety problems, it can also result in increased clean-up, labor costs,...

SPECIFICATIONS
4 - 30 Gallon Rectangular Stainless Steel Containers with Industrial Grade PVC Sight Gauge Assemblies, 2-3/4" Inlet and Outlet Fittings and Desiccant Breathers., 4 - 3-Way Product Diverter Valve Assemblies to allow Product to be Pumped through the Filters into the Containers, and then Pulled back out...

55-gallon drums were okay in their day, but there is a better way to handle all kinds of oils, lubricants and industrial fluids that`s easier, safer, cleaner, and more cost efficient. Inefficient transfer of product can not only lead to safety problems, it can also result in increased clean-up, labor costs,...

SPECIFICATIONS
4 - 65 Gallon Rectangular Mild Steel Containers with PVC Sight Gauge Assemblies, 3/4" Outlet Fittings and Air Vents, 4 - 3/4" NPT Valve Arrangements with 3/4" NPT Self Closing Faucets, 1 - Timer Controlled, Positive Displacement Transfer Unit consisting of:, 1 - 1-1/2 HP 110 Volt...

55-gallon drums were okay in their day, but there is a better way to handle all kinds of oils, lubricants and industrial fluids that`s easier, safer, cleaner, and more cost efficient.

SPECIFICATIONS
4 - 15 Gallon Steel Rectangular Containers with PVC Sight Gauge Assemblies, ¾" Outlet Fittings and Air Vents. Container Dimensions Will be 22" Wide x 22" High x 18" Long and will Mount on Vertical Brackets to Connect to the Crossbeams, 4 - ¾" NPT Valve Arrangements with ¾" NPT Self...

The Gravity Flow Lube Stations combined with an IFH Fluid Storage & Dispensing System and one or more IFH Mobile Fluid Handling Carts will facilitate the handling of any lubricant or fluid that is commonly transferred from a centralized storage location to a tank or reservoir.

SPECIFICATIONS
Number of hoses: 4

55-gallon drums were okay in their day, but there is a better way to handle all kinds of oils, lubricants and industrial fluids that`s easier, safer, cleaner, and more cost efficient. Inefficient transfer of product can not only lead to safety problems, it can also result in increased clean-up, labor costs,...

SPECIFICATIONS
6 - 65 Gallon Rectangular Mild Steel Containers with PVC Sight Gauge Assemblies, 1-¾" Outlet Fittings, 6 - 3 way product diverter valve assemblies, 6 - On/Off Controlled, Electric transfer Units with a 1 1/2 HP 110 Volt Electric Motor, 2 - Grounding Cable Assembly, 6 - Reinforced PVC Suction Hose...

55-gallon drums were okay in their day, but there is a better way to handle all kinds of oils, lubricants and industrial fluids that`s easier, safer, cleaner, and more cost efficient. Inefficient transfer of product can not only lead to safety problems, it can also result in increased clean-up, labor costs,...

SPECIFICATIONS
Number of containers: 6, Size of containers: 120 gallons, Number of pumps: 6, Control Handles:6, Height: 2.64 meters (104"), Width: 4.01 meters (160"), Depth: 1.09 meters (43")

55-gallon drums were okay in their day, but there is a better way to handle all kinds of oils, lubricants and industrial fluids that`s easier, safer, cleaner, and more cost efficient. Inefficient transfer of product can not only lead to safety problems, it can also result in increased clean-up, labor costs,...

SPECIFICATIONS
Number of containers: 6, Size of containers: 120 gallons, Number of pumps: 6, Control Handles:6, Height: 3.35 meters (132"), Width: 3.91 meters (154"), Depth: 1.09 meters (43")

55-gallon drums were okay in their day, but there is a better way to handle all kinds of oils, lubricants and industrial fluids that`s easier, safer, cleaner, and more cost efficient. Inefficient transfer of product can not only lead to safety problems, it can also result in increased clean-up, labor costs,...

SPECIFICATIONS
Number of containers: 6, Size of containers: 120 gallons, Number of pumps: 6, Control Handles:6, Height: 3.35 meters (132"), Width: 3.86 meters (152"), Depth: 1.09 meters (43")

55-gallon drums were okay in their day, but there is a better way to handle all kinds of oils, lubricants and industrial fluids that`s easier, safer, cleaner, and more cost efficient.

SPECIFICATIONS
1 - HDK6-149086 Innovative Fluid Handling System consisting of:, 6 - 65 Gallon Rectangular Mild Steel Containers with Industrial Grade PVC Sight Gauge Assemblies, 2-3/4" Inlet and Outlet Fittings and Desiccant Breathers. Total Container Dimensions are 22" Wide X 22" High X 36" Long. All...

55-gallon drums were okay in their day, but there is a better way to handle all kinds of oils, lubricants and industrial fluids that`s easier, safer, cleaner, and more cost efficient. Inefficient transfer of product can not only lead to safety problems, it can also result in increased clean-up, labor costs,...

SPECIFICATIONS
Number of containers: 6, Size of containers: 250 liters (65 gallons), Height: 2.54 meters (100"), Width: 1.93 meters (76"), Space Required: 2.41 sq m (26 sq ft), Weight: 313 kg (690 lb) COMPCP3 - 3 Section Spill Containment Pan, each Section Measuring 30" Wide X 50" Long X 7"...

The Gravity Flow Lube Stations combined with an IFH Fluid Storage & Dispensing System and one or more IFH Mobile Fluid Handling Carts will facilitate the handling of any lubricant or fluid that is commonly transferred from a centralized storage location to a tank or reservoir.

SPECIFICATIONS
Number of hoses: 6

IFH highly recommends the pruchase of a complete storage rack solution for warranty and liability purposes. We understand that some individuals may simply wish to purchase the containers alone, and build a system, but when you consider the time it takes to plan, design, and procure additional components, the...

IFH highly recommends the pruchase of a complete storage rack solution for warranty and liability purposes. We understand that some individuals may simply wish to purchase the containers alone, and build a system, but when you consider the time it takes to plan, design, and procure additional components, the...

SPECIFICATIONS
Bung size: 2", Hose diameter (ID): 1-1/2", Valve size: 1-1/2"

IFH highly recommends the purchase of a complete storage rack solution for warranty and liability purposes. We understand that some individuals may simply wish to purchase the containers alone, and build a system, but when you consider the time it takes to plan, design, and procure additional components, the...

SPECIFICATIONS
Bung size: 2", Hose diameter (ID): 1-1/2", Valve size: 1-1/2"

55-gallon drums were okay in their day, but there is a better way to handle all kinds of oils, lubricants and industrial fluids that`s easier, safer, cleaner, and more cost efficient. Inefficient transfer of product can not only lead to safety problems, it can also result in increased clean-up, labor costs,...

SPECIFICATIONS
Number of containers: 8, Size of containers: 250 liters (65 gallons), Height: 84", Width: 199", Depth: 43", Spill containment is included, and measures 30" wide x 50" long x 7" high

55-gallon drums were okay in their day, but there is a better way to handle all kinds of oils, lubricants and industrial fluids that`s easier, safer, cleaner, and more cost efficient. Inefficient transfer of product can not only lead to safety problems, it can also result in increased clean-up, labor costs,...

SPECIFICATIONS
Number of containers: 8, Size of containers: 250 liters (65 gallons), Number of pumps: 8, Control Handles:8, Height: 2.64 meters (104"), Width: 5.05 meters (199"), Depth: 1.09 meters (43"), Space Required: 5.52 sq m (59.4 sq ft), Weight: 567 kg (1250 lb) Spill Pan: 7 section Spill...

55-gallon drums were okay in their day, but there is a better way to handle all kinds of oils, lubricants and industrial fluids that`s easier, safer, cleaner, and more cost efficient. Inefficient transfer of product can not only lead to safety problems, it can also result in increased clean-up, labor costs,...

SPECIFICATIONS
Number of containers: 8, Size of containers: 250 liters (65 gallons), Height: 2.54 meters (100"), Width: 2.54 meters (101"), Space Required: 2.97 sq m (32 sq ft), Weight: 395 kg (870 lb), *NOTE: THIS CONFIGURATION DOES NOT INCLUDE A TRANSFER PUMP*

55-gallon drums were okay in their day, but there is a better way to handle all kinds of oils, lubricants and industrial fluids that`s easier, safer, cleaner, and more cost efficient. Inefficient transfer of product can not only lead to safety problems, it can also result in increased clean-up, labor costs,...

SPECIFICATIONS
Number of containers: 8, Size of containers: 250 liters (65 gallons), Height: 2.54 meters (100"), Width: 2.54 meters (101"), Space Required: 2.97 sq m (32 sq ft), Weight: 395 kg (870 lb) COMPCP4 - 4 Section Spill Containment Pan, each Section Measuring 30" Wide X 50" Long X 7"...

SPECIFICATIONS
7 - 65 Gallon Rectangular Mild Steel Containers with PVC Sight Gauge Assemblies, 1-1/2" Flange and Air Vents, 1 - 65 Gallon Rectangular Stainless Steel Containers with PVC Sight Gauge Assemblies, 1-1/2" Flange and Air Vents, 6 - 3/4" NPT Valve Arrangements with 3/4" NPT Self Closing Faucets,...

55-gallon drums were okay in their day, but there is a better way to handle all kinds of oils, lubricants and industrial fluids that`s easier, safer, cleaner, and more cost efficient. Inefficient transfer of product can not only lead to safety problems, it can also result in increased clean-up, labor costs,...

SPECIFICATIONS
8 - 68 Gallon Rectangular Poly Containers with PVC Sight Gauge Assemblies, 1-1/2" Outlet Fittings and Air Vents, 5 - ¾" NPT Poly Valve Arrangements with ¾" NPT Self Closing Faucets, 3 - 1-1/2" NPT Poly Valve Arrangements with 1" NPT Self Closing Faucets, 3 - Timer Controlled, Positive...

The Gravity Flow Lube Stations combined with an IFH Fluid Storage & Dispensing System and one or more IFH Mobile Fluid Handling Carts will facilitate the handling of any lubricant or fluid that is commonly transferred from a centralized storage location to a tank or reservoir.

SPECIFICATIONS
Number of hoses: 8

55-gallon drums were okay in their day, but there is a better way to handle all kinds of oils, lubricants and industrial fluids that`s easier, safer, cleaner, and more cost efficient. Inefficient transfer of product can not only lead to safety problems, it can also result in increased clean-up, labor costs,...

SPECIFICATIONS
Number of containers: 9, Size of containers: 250 liters (65 gallons), Height: 3.45 meters (136"), Width: 1.93 meters (76"), Space Required: 2.11 sq m (22.7 sq ft), Weight: 395 kg (870 lb), NOTE: THIS SYSTEM INCLUDES SPILL CONTAINMENT

When additional pumps are added to the IFH system, a side mounting drip pan is necessary. Up to 3 system pumps can be accomodated with the addition of 2 side mount drip pans.

This assembly comes complete with all parts to allow you to connect all the air breather vents for one row of tanks (4 containers per row) so that you can use one large air breather per row of containers. The assembly comes with a mounting bracket and a 3/4" M-NPT pipe threaded connector for attaching an...

SPECIFICATIONS
NOTE: Air breather is sold separately.

SPECIFICATIONS
Air Pump: 3/4" 1:1

SPECIFICATIONS
Air Pump: 3/4" 1:1

Recommended for IFH Rack Systems where oil products vary significantly (i.e. PAG fluid stored along with mineral oils). In this case an additional seperate suction hose is recommended for each different class fluid. NOTE: All IFH Rack Systems come with one discharge hose assembly included.

SPECIFICATIONS
Hose length: 6 ft

Includes electric motor/gear pump, timer and connections. 115/208-230 V, 60 Hz, 1725 RPM, AMPS (@230V) 5.3.

SPECIFICATIONS
Motor Rating: 1 HP, Electrical: 115/208-230 V, 60 Hz, 1725 RPM, 5.3 AMPS (@230V)

Includes electric motor/gear pump, timer and connections. 115/208-230 V, 60 Hz, 1725 RPM, AMPS (@230V) 8.6.

SPECIFICATIONS
Motor Rating: 1-1/2 HP, Electrical: 115/208-230 V, 60 Hz, 1725 RPM, 8.6 AMPS (@230V)

Includes electric motor/gear pump, timer and connections. 115/208-230 V, 60 Hz, 1725 RPM, AMPS (@230V) 8.6.

SPECIFICATIONS
Motor Rating: 1-1/2 HP, Electrical: 115/208-230 V, 60 Hz, 1725 RPM, 8.6 AMPS (@230V)

The filtration assembly connects behind the oil spigot and includes a filter head, with 10 micron filter, by-pass, pressure relief valve, pressure indicator, and quick connector for connection during container filling. Filtration of the oil is done during filling of the container. For maximum oil...

SPECIFICATIONS
Filter Rating: 10 micron (nominal)

The filtration assembly connects behind the oil spigot and includes a filter head, with 25 micron filter, by-pass, pressure relief valve, pressure indicator, and quick connector for connection during container filling. Filtration of the oil is done during filling of the container. For maximum oil...

SPECIFICATIONS
Filter Rating: 25 micron (nominal)

The filtration assembly connects behind the oil spigot and includes a filter head, with 3 micron filter, by-pass, pressure relief valve, pressure indicator, and quick connector for connection during container filling. Filtration of the oil is done during filling of the container. For maximum oil...

SPECIFICATIONS
Filter Rating: 3 micron (absolute)

For users who need to be in compliance with strict fire safety regulations, IFH offers the Fire Safety Compliance Kit. The standard PVC Sight Gauge on the front of the Containers is replaced with a fire-resistant Glass Sight Gauge equipped with Ball Check Fittings at both ends. Underneath the Containers, the...

For users who need to be in compliance with strict fire safety regulations, IFH offers the Fire Safety Compliance Kit. The standard PVC Sight Gauge on the front of the Containers is replaced with a fire-resistant Glass Sight Gauge equipped with Ball Check Fittings at both ends. Underneath the Containers, the...

This sticker pack contains1 X large sticker (8-1/2" X 5-1/2") with the NIOSH rating of the fluid, and description of the product in a color-coded and symbol-coded box, suitable for sticking onto an IFH container.1 X medium sticker (4" X 3-1/3") with a description of the product in a...

The grounding cable assembly grounds the rack system and all filters (if present). This is required on all IFH rack systems of 8 containers or more, but is recommended for all systems to prevent sparks due to static charge build-up.

When storing oils that have a viscosity of 220 cSt @ 40°C (ISO 220) or greather, a high-viscosity tank must be used. This tank has larger valves (1-1/2") and hosing to allow for the thicker viscosity oil to dispense at a normal rate. NOTE: If you have high-viscosity containers in your IFH Rack...

SPECIFICATIONS
Bung size: 2", Hose diameter (ID): 1-1/2", Valve size: 1-1/2"

When storing oils that have a viscosity of 220 cSt @ 40°C (ISO 220) or greather, a high-viscosity tank must be used. This tank has larger valves (1-1/2") and hosing to allow for the thicker viscosity oil to dispense at a normal rate. NOTE: If you have high-viscosity containers in your IFH Rack...

SPECIFICATIONS
Container Size: 15 gallon, Bung size: 2", Hose diameter (ID): 1-1/2", Valve size: 1-1/2"

These vinyl stickers come in 10 colors to match your oil dispensing containers, and to assist in the identification of the oil products stored in your IFH system. The stickers have an adhesive backing, and come silk-screened with a NIOSH symbol and area to write in the product name. The stickers show both...

SPECIFICATIONS
PAN DRIP ASSY 36 X 46.75 X 2.5

SPECIFICATIONS
PAN DRIP ASSY 36 X 70 X 2.5

SPECIFICATIONS
PAN DRIP ASSY 36 X 94 X 2.5

For IFH System: Large 8” X 8” Steel Plates are welded to the bottom of the Upright Frame Legs on all 4 Corners so that the System can be lagged to the ground with Lag Bolts. For Spill Containment Pans:Large 8" X 8" Steel Plates are welded onto the channel supports of each section of the...

For applications involving corrosive chemicals that may damage the standard PVC hose, IFH offers the Special Product Package. The standard PVC Sight Gauge on the front of the Containers is replaced with a Glass Sight Gauge equipped with Ball Check Fittings at both ends. Underneath the containers are 3/4"...

For applications involving corrosive chemicals that may damage the standard PVC hose, IFH offers the Special Product Package. The standard PVC Sight Gauge on the front of the Containers is replaced with a Glass Sight Gauge equipped with Ball Check Fittings at both ends. Underneath the containers are...

The IFH optional Spill Containment System can help you avoid costly clean up and potential fines. The Spill Containment System includes spill containment for the IFH Storage & Dispensing System IFH-HDS4

SPECIFICATIONS
Height: 18 centimeters (7"), Width: 1.52 meters (60"), Depth: 1.27 meters (50"), Weight: 91 kg (200 lb), Capacity: 90 gallons

The IFH optional Spill Containment System can help you avoid costly clean up and potential fines. The Spill Containment System includes spill containment for the IFH Storage & Dispensing System IFH-HDJ6

SPECIFICATIONS
Height: 18 centimeters (7"), Width: 2.29 meters (90"), Depth: 1.27 meters (50"), Weight: 136 kg (300 lb), Capacity: 135 gallons

The IFH optional Spill Containment System can help you avoid costly clean up and potential fines. The Spill Containment System includes spill containment for the IFH Storage & Dispensing System IFH-HDK8

SPECIFICATIONS
Height: 18 centimeters (7"), Width: 3.05 meters (120"), Depth: 1.27 meters (50"), Weight: 182 kg (400 lb), Capacity: 180 gallons

The IFH optional Spill Containment System can help you avoid costly clean up and potential fines. The Spill Containment System includes spill containment for the IFH Storage & Dispensing System IFH-HDK8

SPECIFICATIONS
Height: 18 centimeters (7"), Width: 3.81 meters (150"), Depth: 1.27 meters (50"), Weight: 227 kg (500 lb)

The IFH optional Spill Containment System can help you avoid costly clean up and potential fines. The Spill Containment System includes spill containment for the IFH Storage & Dispensing System IFH-HDK8

SPECIFICATIONS
Height: 18 centimeters (7"), Width: 4.57 meters (180"), Depth: 1.27 meters (50"), Weight: 272 kg (600 lb)

The IFH optional Spill Containment System can help you avoid costly clean up and potential fines. The Spill Containment System includes spill containment for the IFH Storage & Dispensing System IFH-HDK8

SPECIFICATIONS
Height: 18 centimeters (7"), Width: 5.33 meters (210"), Depth: 1.27 meters (50"), Weight: 364 kg (800 lb)

The IFH optional Spill Containment System can help you avoid costly clean up and potential fines. The Spill Containment System includes spill containment for the IFH Storage & Dispensing System IFH-HDK8

SPECIFICATIONS
Height: 18 centimeters (7"), Width: 6.10 meters (240"), Depth: 1.27 meters (50"), Weight: 415 kg (915 lb)

The IFH optional Spill Containment System can help you avoid costly clean up and potential fines. The Spill Containment System includes spill containment for the IFH Gravity Flow Lube Station

SPECIFICATIONS
Height: 18 centimeters (7"), Width: 1.27 meters (50"), Depth: 0.76 meters (30"), Weight: 45 kg (100 lb)

When storing products that contain water or have either a high or a low pH, a stainless-steel tank must be used. NOTE: For each stainless-steel container in your IFH Rack System, you must also add a specialty products package P/N 706000

Recommended for IFH Rack Systems where oil products vary significantly (i.e. PAG fluid stored along with mineral oils). In this case an additional seperate suction hose is recommended for each different class fluid. NOTE: All IFH Rack Systems come with one suction hose assembly included.

SPECIFICATIONS
Hose length: 6 ft, Wand length: 4 ft

The U.L.C. Listed C142.14-03 Cubet container provides a unique solution to storage and dispensing fluids. The Cubet’s logical and integrated design allows you to save time and money, plus provide a cleaner, safer working environment. Cubet containers are available in 265, 460, 550, 870, and 1250 litre sizes...

SPECIFICATIONS
Capacity: 1 x 120 gallons (460 litres), Dimensions: 33"(L) x 33"(W) x 51"(H) (84cm x 84cm x 130cm), Container Material: High-Density Polyethylene (food grade, UL rated), Certification: U.L.C. Listed C142.14-03

The U.L.C. Listed C142.14-03 Cubet container provides a unique solution to storage and dispensing fluids. The Cubet’s logical and integrated design allows you to save time and money, plus provide a cleaner, safer working environment. Cubet containers are available in 265, 460, 550, 870, and 1250 litre sizes...

SPECIFICATIONS
Capacity: 145 gallons (550 litres), Dimensions: 33"(L) x 33"(W) x 59"(H) (84cm x 84cm x 150cm), Container Material: High-Density Polyethylene (food grade, UL rated), Certification: U.L.C. Listed C142.14-03

Improved Lubricant Storage The Lubrigard Polytank Lubricant Storage System (POD) combines, filtration, storage and breather technologies all in one small package designed to keep your lubricants clean during storage, and before they enter your equipment. All-in-one Package The Lubrigard Polytank...

SPECIFICATIONS
Number of Containers: 1, Capacity: 1 x 220 US gallons (870 litres), tank will have 2 - ¾ port holes plastic welded for the top and bottom 3 way valve hook ups, Air pump and filter unit plate holder will be mounted to the steel frame

Improved Lubricant Storage The Lubrigard Polytank Lubricant Storage System (POD) combines, filtration, storage and breather technologies all in one small package designed to keep your lubricants clean during storage, and before they enter your equipment. All-in-one Package The Lubrigard Polytank...

SPECIFICATIONS
Number of Containers: 1, Capacity: 1 x 220 US gallons (870 litres), tank will have 2 - ¾ port holes plastic welded for the top and bottom 3 way valve hook ups, Air pump and filter unit plate holder will be mounted to the steel frame, System includes forklift channels

The U.L.C. Listed C142.14-03 Cubet container provides a unique solution to storage and dispensing fluids. The Cubet’s logical and integrated design allows you to save time and money, plus provide a cleaner, safer working environment. Cubet containers are available in 265, 460, 550, 870, and 1250 litre sizes...

SPECIFICATIONS
Capacity: 1 x 70 gallons (265 litres), Dimensions: 33"(L) x 33"(W) x 38"(H) (84cm x 84cm x 97cm), Container Material: High-Density Polyethylene (food grade, UL rated), Certification: U.L.C. Listed C142.14-03

Improved Lubricant Storage The Lubrigard Polytank Lubricant Storage System (POD) combines, filtration, storage and breather technologies all in one small package designed to keep your lubricants clean during storage, and before they enter your equipment. All-in-one Package The Lubrigard Polytank...

SPECIFICATIONS
Number of Containers: 2, Capacity: 1 x 70 US gallons (265 litres), Tank Size: 32" (W) x 32" (D) x 20" (H) ( 81 x 81 x 51 cm ), Spill Containment Size: 43" (W) x 48" (L) x 6" (H) ( 109 x 122 x 15 cm ), System Height: 88" (223 cm), System Width: 43" (109 cm)

Improved Lubricant Storage The Lubrigard Polytank Lubricant Storage System (POD) combines, filtration, storage and breather technologies all in one small package designed to keep your lubricants clean during storage, and before they enter your equipment. All-in-one Package The Lubrigard Polytank...

SPECIFICATIONS
Number of Containers: 2, Capacity: 1 x 70 US gallons (265 litres), Tank Size: 32" (W) x 32" (D) x 20" (H) ( 81 x 81 x 51 cm ), Capacity: 1 x 145 US gallons (550 litres), Tank Size: 32" (W) x 32" (D) x 40" (H) ( 81 x 81 x 102 cm ), Spill Containment Size: 43" (W) x...

The U.L.C. Listed C142.14-03 Cubet container provides a unique solution to storage and dispensing fluids. The Cubet’s logical and integrated design allows you to save time and money, plus provide a cleaner, safer working environment. Cubet containers are available in 265, 460, 550, 870, and 1250 litre sizes...

SPECIFICATIONS
Capacity: 120 gallons (460 litres), Weight: 63 lbs (28.5 kgs), Dimensions: 33"(L) x 33"(W) x 33"(H) (84cm x 84cm x 84cm), Container Material: High-Density Polyethylene (food grade, UL rated), Certification: U.L.C. Listed C142.14-03

The U.L.C. Listed C142.14-03 Cubet container provides a unique solution to storage and dispensing fluids. The Cubet’s logical and integrated design allows you to save time and money, plus provide a cleaner, safer working environment. Cubet containers are available in 265, 460, 550, 870, and 1250 litre sizes...

SPECIFICATIONS
Capacity: 145 gallons (550 litres), Weight: 75 lbs (34 kgs), Dimensions: 33"(L) x 33"(W) x 41"(H) (84cm x 84cm x 104cm), Container Material: High-Density Polyethylene (food grade, UL rated), Certification: U.L.C. Listed C142.14-03

The U.L.C. Listed C142.14-03 Cubet container provides a unique solution to storage and dispensing fluids. The Cubet’s logical and integrated design allows you to save time and money, plus provide a cleaner, safer working environment. Cubet containers are available in 265, 460, 550, 870, and 1250 litre sizes...

SPECIFICATIONS
Capacity: 2 x 120 gallons (460 litres), Dimensions: 33"(L) x 33"(W) x 84"(H) (84cm x 84cm x 213cm), Container Material: High-Density Polyethylene (food grade, UL rated), Certification: U.L.C. Listed C142.14-03

The U.L.C. Listed C142.14-03 Cubet container provides a unique solution to storage and dispensing fluids. The Cubet’s logical and integrated design allows you to save time and money, plus provide a cleaner, safer working environment. Cubet containers are available in 265, 460, 550, 870, and 1250 litre sizes...

SPECIFICATIONS
Capacity: 2 x 145 gallons (550 litres), Dimensions: 33"(L) x 33"(W) x 100"(H) (84cm x 84cm x 254cm), Container Material: High-Density Polyethylene (food grade, UL rated), Certification: U.L.C. Listed C142.14-03

Improved Lubricant Storage The Lubrigard Polytank Lubricant Storage System (POD) combines, filtration, storage and breather technologies all in one small package designed to keep your lubricants clean during storage, and before they enter your equipment. All-in-one Package The Lubrigard Polytank...

SPECIFICATIONS
Number of Containers: 2, Capacity: 2 x 145 US gallons (550 litres), Tank Size: 32" (W) x 32" (D) x 40" (H) ( 81 x 81 x 102 cm ), Spill Containment Size: 43" (W) x 48" (L) x 6" (H) ( 109 x 122 x 15 cm ), System Height: 106" (268 cm), System Width: 43" (109 cm)

The U.L.C. Listed C142.14-03 Cubet container provides a unique solution to storage and dispensing fluids. The Cubet’s logical and integrated design allows you to save time and money, plus provide a cleaner, safer working environment. Cubet containers are available in 265, 460, 550, 870, and 1250 litre sizes...

SPECIFICATIONS
Capacity: 2 x 70 gallons (265 litres), Dimensions: 33"(L) x 33"(W) x 58"(H) (84cm x 84cm x 147cm), Container Material: High-Density Polyethylene (food grade, UL rated), Certification: U.L.C. Listed C142.14-03

Improved Lubricant Storage The Lubrigard Polytank Lubricant Storage System (POD) combines, filtration, storage and breather technologies all in one small package designed to keep your lubricants clean during storage, and before they enter your equipment. All-in-one Package The Lubrigard Polytank...

SPECIFICATIONS
Number of Containers: 2, Capacity: 2 x 70 US gallons (265 litres), Tank Size: 32" (W) x 32" (D) x 20" (H) ( 81 x 81 x 51 cm ), Spill Containment Size: 43" (W) x 48" (L) x 6" (H) ( 109 x 122 x 15 cm ), System Height: 88" (223 cm), System Width: 43" (109 cm), NOTE -...

Improved Lubricant Storage The Lubrigard Polytank Lubricant Storage System (POD) combines, filtration, storage and breather technologies all in one small package designed to keep your lubricants clean during storage, and before they enter your equipment. All-in-one Package The Lubrigard Polytank...

SPECIFICATIONS
Number of Containers: 2, Capacity: 2 x 70 US gallons (265 litres), Tank Size: 32" (W) x 32" (D) x 20" (H) ( 81 x 81 x 51 cm ), Spill Containment Size: 43" (W) x 48" (L) x 6" (H) ( 109 x 122 x 15 cm ), System Height: 88" (223 cm) add 22" of height for hose reel -...

The U.L.C. Listed C142.14-03 Cubet container provides a unique solution to storage and dispensing fluids. The Cubet’s logical and integrated design allows you to save time and money, plus provide a cleaner, safer working environment. Cubet containers are available in 265, 460, 550, 870, and 1250 litre sizes...

SPECIFICATIONS
Capacity: 1 x 230 gallons (870 litres), Weight: 104 lbs (47.2 kgs), Dimensions: 34½"(L) x 34½"(W) x 76"(H) (88cm x 88cm x 193cm), Stand Height: 18" (46cm), Container Material: High-Density Polyethylene (food grade, UL rated)Retractable reel c/w 30` hose, Electronic Totalizing...

The U.L.C. Listed C142.14-03 Cubet container provides a unique solution to storage and dispensing fluids. The Cubet’s logical and integrated design allows you to save time and money, plus provide a cleaner, safer working environment. Cubet containers are available in 265, 460, 550, 870, and 1250 litre sizes...

SPECIFICATIONS
Capacity: 1 x 230 gallons (870 litres), Weight: 104 lbs (47.2 kgs), Dimensions: 34½"(L) x 34½"(W) x 76"(H) (88cm x 88cm x 193cm), Stand Height: 18" (46cm), Container Material: High-Density Polyethylene (food grade, UL rated), Certification: U.L.C. Listed C142.14-03

The U.L.C. Listed C142.14-03 Cubet container provides a unique solution to storage and dispensing fluids. The Cubet’s logical and integrated design allows you to save time and money, plus provide a cleaner, safer working environment. Cubet containers are available in 265, 460, 550, 870, and 1250 litre sizes...

SPECIFICATIONS
Capacity: 230 gallons (870 litres), Weight: 104 lbs (47.2 kgs), Dimensions: 34½"(L) x 34½"(W) x 63"(H) (88cm x 88cm x 160cm), Container Material: High-Density Polyethylene (food grade, UL rated), Certification: U.L.C. Listed C142.14-03

The U.L.C. Listed C142.14-03 Cubet container provides a unique solution to storage and dispensing fluids. The Cubet’s logical and integrated design allows you to save time and money, plus provide a cleaner, safer working environment. Cubet containers are available in 265, 460, 550, 870, and 1250 litre sizes...

SPECIFICATIONS
Capacity: 14 x 70 gallons (14 x 265 litres) and 2 x 140 gallons (2 x 550 litres), Dimensions: 240"(W) x 108"(H), Container Material: High-Density Polyethylene (food grade, UL rated), Certification: U.L.C. Listed C142.14-03

The U.L.C. Listed C142.14-03 Cubet container provides a unique solution to storage and dispensing fluids. The Cubet's logical and integrated design allows you to save time and money, plus provide a cleaner, safer working environment. Cubet containers are available in 265, 460, 550, 870, and 1250 litre...

SPECIFICATIONS
Capacity: 3 x 70 gallons (265 litres), Dimensions: 33"(L) x 33"(W) x 78"(H) (84cm x 84cm x 198cm), Container Material: High-Density Polyethylene (food grade, UL rated), Certification: U.L.C. Listed C142.14-03

Improved Lubricant Storage The Lubrigard Polytank Lubricant Storage System (POD) combines, filtration, storage and breather technologies all in one small package designed to keep your lubricants clean during storage, and before they enter your equipment. All-in-one Package The Lubrigard Polytank...

SPECIFICATIONS
capacity: 3x70 US Gallons (265 liters) poly tanks, 3x Piston Air pump 1:1 with regulator, 3x Filtration : 5?x7? spin on element, 3x Breather Filter: DC-2 3 micron particle desiccant breather, Dispensing hoses with handles- Quick connect set up, Suction/transfer hoses ? Quick connect set up, Drum...

Improved Lubricant Storage The Lubrigard Polytank Lubricant Storage System (POD) combines, filtration, storage and breather technologies all in one small package designed to keep your lubricants clean during storage, and before they enter your equipment. All-in-one Package The Lubrigard Polytank...

SPECIFICATIONS
capacity: 3x70 US Gallons (265 liters) poly tanks, 3x Piston Air pump 3:1 with regulator, 3x Filtration : 5"x7" spin on element, 3x Breather Filter: DC-2 3 micron particle desiccant breather, Dispensing hoses with handles, Suction/transfer hoses (10') NO QUICK CONNECTS, Drum Adaptor...

Improved Lubricant Storage The Lubrigard Polytank Lubricant Storage System (POD) combines, filtration, storage and breather technologies all in one small package designed to keep your lubricants clean during storage, and before they enter your equipment. All-in-one Package The Lubrigard Polytank...

SPECIFICATIONS
Number of Containers: 3, Capacity: 3 x 70 US gallons (265 litres), Tank Size: 32" (W) x 32" (D) x 20" (H) ( 81 x 81 x 51 cm ), System Height: 88" (223 cm), System Width: 43" (109 cm)

Improved Lubricant Storage The Lubrigard Polytank Lubricant Storage System (POD) combines, filtration, storage and breather technologies all in one small package designed to keep your lubricants clean during storage, and before they enter your equipment. All-in-one Package The Lubrigard Polytank...

SPECIFICATIONS
Number of Containers: 3, Capacity: 3 x 70 US gallons (265 litres), Tank Size: 32" (W) x 32" (D) x 20" (H) ( 81 x 81 x 51 cm ), Spill Containment Size: 40" (W) x 47" (L) x 10" (H), System Height: 88" (223 cm) add 22" of height for hose reel - total 110" (280cm),...

Improved Lubricant Storage The Lubrigard Polytank Lubricant Storage System (POD) combines, filtration, storage and breather technologies all in one small package designed to keep your lubricants clean during storage, and before they enter your equipment. All-in-one Package The Lubrigard Polytank...

SPECIFICATIONS
Number of Containers: 3, Capacity: 3 x 70 US gallons (265 litres), Tank Size: 32" (W) x 32" (D) x 20" (H) ( 81 x 81 x 51 cm ), Spill Containment Size: 43" (W) x 48" (L) x 6" (H) ( 109 x 122 x 15 cm ), System Height: 88" (223 cm) add 22" of height for hose reel - total 110"...

The U.L.C. Listed C142.14-03 Cubet container provides a unique solution to storage and dispensing fluids. The Cubet's logical and integrated design allows you to save time and money, plus provide a cleaner, safer working environment. Cubet containers are available in 265, 460, 550, 870, and 1250 litre...

SPECIFICATIONS
Capacity: 330 gallons (1250 litres), Weight: 116 lbs (52.6 kgs), Dimensions: 34-1/2"(L) x 44-1/2"(W) x 63"(H) (88cm x 113cm x 160cm), Container Material: High-Density Polyethylene (food grade, UL rated), Certification: U.L.C. Listed C142.14-03

The U.L.C. Listed C142.14-03 Cubet container provides a unique solution to storage and dispensing fluids. The Cubet’s logical and integrated design allows you to save time and money, plus provide a cleaner, safer working environment. Cubet containers are available in 265, 460, 550, 870, and 1250 litre sizes...

SPECIFICATIONS
Capacity: 1 x 330 gallons (1250 litres), Container Material: High-Density Polyethylene (food grade, UL rated), Retractable Reel c/w 30` hose, Electronic Totalizing Meter, Certification: U.L.C. Listed C142.14-03

The U.L.C. Listed C142.14-03 Cubet container provides a unique solution to storage and dispensing fluids. The Cubet’s logical and integrated design allows you to save time and money, plus provide a cleaner, safer working environment. Cubet containers are available in 265, 460, 550, 870, and 1250 litre sizes...

SPECIFICATIONS
Capacity: 330 gallons (1250 litres), Weight: 116 lbs (52.6 kgs), Dimensions: 34½"(L) x 44½"(W) x 63"(H) (88cm x 113cm x 160cm), Container Material: High-Density Polyethylene (food grade, UL rated), Certification: U.L.C. Listed C142.14-03

The U.L.C. Listed C142.14-03 Cubet container provides a unique solution to storage and dispensing fluids. The Cubet’s logical and integrated design allows you to save time and money, plus provide a cleaner, safer working environment. Cubet containers are available in 265, 460, 550, 870, and 1250 litre sizes...

SPECIFICATIONS
Capacity: 70 gallons (265 litres), Weight: 46 lbs (20.8 kgs), Dimensions: 33"(L) x 33"(W) x 20"(H) (84cm x 84cm x 51 cm), Container Material: High-Density Polyethylene (food grade, UL rated), Certification: U.L.C. Listed C142.14-03

The U.L.C. Listed C142.14-03 Cubet container provides a unique solution to storage and dispensing fluids. The Cubet's logical and integrated design allows you to save time and money, plus provide a cleaner, safer working environment. Cubet containers are available in 265, 460, 550, 870, and 1250 litre...

SPECIFICATIONS
Capacity: 870 litres, Container Material: High-Density Polyethylene (food grade, UL rated), Certification: U.L.C. Listed C142.14-03

The U.L.C. Listed C142.14-03 Cubet container provides a unique solution to storage and dispensing fluids. The Cubet’s logical and integrated design allows you to save time and money, plus provide a cleaner, safer working environment. Cubet containers are available in 265, 460, 550, 870, and 1250 litre sizes...

The U.L.C. Listed C142.14-03 Cubet container provides a unique solution to storage and dispensing fluids. The Cubet’s logical and integrated design allows you to save time and money, plus provide a cleaner, safer working environment. Cubet containers are available in 265, 460, 550, 870, and 1250 litre sizes...

The U.L.C. Listed C142.14-03 Cubet container provides a unique solution to storage and dispensing fluids. The Cubet’s logical and integrated design allows you to save time and money, plus provide a cleaner, safer working environment. Cubet containers are available in 265, 460, 550, 870, and 1250 litre sizes...

The U.L.C. Listed C142.14-03 Cubet container provides a unique solution to storage and dispensing fluids. The Cubet’s logical and integrated design allows you to save time and money, plus provide a cleaner, safer working environment. Cubet containers are available in 265, 460, 550, 870, and 1250 litre sizes...

These vinyl stickers come in 10 colors to match your oil dispensing containers, and to assist in the identification of the oil products stored in your storage system. The stickers have an adhesive backing, and come silk-screened with a NIOSH symbol and area to write in the product name. The stickers show...

SPECIFICATIONS
1 - 70 gallon poly tank on a fluid cart frame with wheel castors. Air pump , Filter system, DC-2 breather, 10 ft suction with ¾ QC and 10 ft dispensing hoses with ½ quick connect.

The U.L.C. Listed C142.14-03 Cubet container provides a unique solution to storage and dispensing fluids. The Cubet's logical and integrated design allows you to save time and money, plus provide a cleaner, safer working environment. Cubet containers are available in 265, 460, 550, 870, and 1250 litre...

SPECIFICATIONS
Short Steel Frame - 145 Gal

The U.L.C. Listed C142.14-03 Cubet container provides a unique solution to storage and dispensing fluids. The Cubet’s logical and integrated design allows you to save time and money, plus provide a cleaner, safer working environment. Cubet containers are available in 265, 460, 550, 870, and 1250 litre sizes...

The U.L.C. Listed C142.14-03 Cubet container provides a unique solution to storage and dispensing fluids. The Cubet’s logical and integrated design allows you to save time and money, plus provide a cleaner, safer working environment. Cubet containers are available in 265, 460, 550, 870, and 1250 litre sizes...

The Oil Safe Tote Dispensing Rack delivers best practice contamination control for common 300 Gallon Totes in a modular, ergonomic and space efficient form.

SPECIFICATIONS
Positive displacement Gear Pump (3-5GPM) with internal bypass, Retractable Hose Dispensing Reel (25 feet) with Trigger Dispenser, Comes standard with 12um, B1000 HP Filter with DP indicator (3, 7 and 22um also available), Electronic Stop/Start buttons, Rack will accommodate Totes with base dimensions...

An instant Lube Room, this premium configuration incorporates best of class features.

SPECIFICATIONS
Number of containers: 4 x 65 Gallon Tanks, All framework & pans to be supplied in black as per Oil Safe standard, Fluid Compatibility - suitable for lubricating oils & glycol base coolants. Not for use with fuels or solvents, or fluids with a flashpoint below 150F., MSDS Sheets for each fluid to be...

An instant Lube Room, this premium configuration incorporates best of class features.

SPECIFICATIONS
Number of containers: 4 x 30gal, 2 x 65gal,

New from Y2K is the Gravity Feed Lube Dispensing Work Station. This workstation comes in either 8 or 12 tanks and is fully customizable to your needs.

SPECIFICATIONS
12 Custom Fabricated 30 Gallon Steel Tanks (12 Ga steel), Breather Adapter Kit installed on each tank With Inlet Filling Quick Disconnect to fill with filtered fluids, 3/4" Tank Dispenser on each 30 Gallon Tank for dispensing into jugs, Universal mount jug shelf can be bolted on the left or right...

New from Y2K is the Gravity Feed Lube Dispensing Work Station. This workstation comes in either 8 or 12 tanks and is fully customizable to your needs.

SPECIFICATIONS
8 Custom Fabricated 30 Gallon Steel Tanks (12 Ga steel), Breather Adapter Kit installed on each tank With Inlet Filling Quick Disconnect to fill with filtered fluids, 3/4" Tank Dispenser on each 30 Gallon Tank for dispensing into jugs, Universal mount jug shelf can be bolted on the left or right...

65-gallon drums were okay in their day, but there is a better way to handle all kinds of oils, lubricants and industrial fluids that`s easier, safer, cleaner, and more cost efficient. Inefficient transfer of product can not only lead to safety problems, it can also result in increased clean-up, labor costs,...

SPECIFICATIONS
8 - 65 Gallon Rectangular Mild Steel Containers with Industrial Grade PVC Sight Gauge Assemblies, 2-3/4" Inlet and Outlet Fittings and Desiccant Breathers. Total Container Dimensions are 22" Wide X 22" High X 36" Long. All Containers are TGIC Polyester Powder Coated, have 16 Gauge Steel...

55-gallon drums were okay in their day, but there is a better way to handle all kinds of oils, lubricants and industrial fluids that`s easier, safer, cleaner, and more cost efficient. Inefficient transfer of product can not only lead to safety problems, it can also result in increased clean-up, labor costs,...

SPECIFICATIONS
8 - 65 Gallon Rectangular Mild Steel Containers with PVC Sight Gauge Assemblies, 1-1/2" Flanges and Air Vents, 8 - ¾" NPT Valve Arrangements with ¾" NPT Self Closing Faucets, 1 - Timer Controlled, Positive Displacement Transfer Unit consisting of:, 1 - 1 - 1-1/2 HP 220 Volt 50 HTZ....

This assembly comes complete with all parts to allow you to connect all the air breather vents for one row of tanks (2 containers per row) so that you can use one large air breather per row of containers. The assembly comes with a mounting bracket and a 3/4" M-NPT pipe threaded connector for attaching an...

SPECIFICATIONS
NOTE: Air breather is sold separately.

This assembly comes complete with all parts to allow you to connect all the air breather vents for one row of tanks (3 containers per row) so that you can use one large air breather per row of containers. The assembly comes with a mounting bracket and a 3/4" M-NPT pipe threaded connector for attaching an...

SPECIFICATIONS
NOTE: Air breather is sold separately.

Improved Lubricant Storage The Lubrigard Polytank Lubricant Storage System (POD) combines, filtration, storage and breather technologies all in one small package designed to keep your lubricants clean during storage, and before they enter your equipment. All-in-one Package The Lubrigard Polytank...

SPECIFICATIONS
Number of Containers: 1, Capacity: 1 x 330 US gallons (1250 litres), Spill deck, LG pump and filter, Oil Dispensing bar station

Improved Lubricant Storage The Lubrigard Polytank Lubricant Storage System (POD) combines, filtration, storage and breather technologies all in one small package designed to keep your lubricants clean during storage, and before they enter your equipment. All-in-one Package The Lubrigard Polytank...

SPECIFICATIONS
Number of Containers: 1, Capacity: 1 x 330 US gallons (1250 litres), LG pump and filter, 3:1 air pump , 1x filtration system, 1x spill container , 1x air breather , 1x set of hoses w quick connects ¾ “.

Improved Lubricant Storage The Lubrigard Polytank Lubricant Storage System (POD) combines, filtration, storage and breather technologies all in one small package designed to keep your lubricants clean during storage, and before they enter your equipment. All-in-one Package The Lubrigard Polytank...

SPECIFICATIONS
Number of Containers: 2, Capacity: 2 x 70 US gallons (265 litres), Tank Size: 32" (W) x 32" (D) x 20" (H) ( 81 x 81 x 51 cm ), Spill Containment Size: 43" (W) x 48" (L) x 6" (H) ( 109 x 122 x 15 cm ), Lower storage base plate where 3rd tank would be used for storage., System...

The U.L.C. Listed C142.14-03 Cubet container provides a unique solution to storage and dispensing fluids. The Cubet's logical and integrated design allows you to save time and money, plus provide a cleaner, safer working environment. Cubet containers are available in 265, 460, 550, 870, and 1250 litre...

SPECIFICATIONS
** Tank Only ** , Capacity: 330 gallons (1250 litres), Weight: 116 lbs (52.6 kgs), Dimensions: 34-1/2"(L) x 44-1/2"(W) x 63"(H) (88cm x 113cm x 160cm), Container Material: High-Density Polyethylene (food grade, UL rated), Certification: U.L.C. Listed C142.14-03

Filter conversion kit

SPECIFICATIONS
Comes with: , Pump Outlet Hose, 2x Close Nipples, 2x Isolation Valve, 2x Swivel Fittings (1- straight, 1 - 90 degree), Filter Outlet Hose

SPECIFICATIONS
OIL SAFE - 110V 55 Gallon Drum Work Station, NOTE: DISPENSING CONTAINER AND LID NOT INCLUDED

SPECIFICATIONS
OIL SAFE - 240V 55 Gallon Drum Work Station, NOTE: DISPENSING CONTAINER AND LID NOT INCLUDED