Email Us

  info.sales@lubrigard.com

SHOP BY

  • Filter By Sub Category
    Oil Analysis Kits
    Sampling Hardware
    Instrumentation
  • MANUFACTURER
    MP Filtri
    CINRG Systems Inc.
    Lubrigard
    WearCheck
    CINRG
    Des-Case
    Klotz
    Luneta
    Stauff
    CheckFluid
 Reset Filters
 
  •  
  •  
per page
  • LPA3 Portable Particle Counter without RH Sensor
    LPA3 Portable Particle Counter without RH Sensor

    LPA3 Portable Particle Counter without RH Sensor

    $14,013.65
    P/N: LPA3-O-P-M-101

    The LPA3 was designed to replace the LPA2. The customer should find only improvements in terms of performance. MP Filtri fts next-generation LPA3 delivers a fast, accurate and comprehensive hydraulic health check in a robust yet portable package. Featuring the latest breakthroughs in optical and...

    SPECIFICATIONS
    Technology: LED based light extinction automatic optical particle counter Particle Sizing: >4, >6, >14, >21, >25, >38, >50, >70 µm(c) Analysis Range:ISO 4406:2017 Code 8 to 24 NAS 1638 Class 2 to 12 AS4059/ISO11218 Rev E, Table 1 Size Codes 2-12 AS4059/ISO11218 Rev E, Table 2 Size Codes, A:000 to 12,...
       
    A unique high accuracy, fully portable product. For users of hydraulic, lubrication and transmission systems. The LPA3 is a highly accurate, portable laser particle analyser that counts and sizes particles of solid contaminants in fluid
    P/N: LPA3-O-P-M-101

    $14,013.65 
       
  • CS-X housing assembly
    CS-X housing assembly

    CS-X housing assembly

    $889.88
    P/N: CS-0698X

    CS-0698X - CS-X housing - 06984 Assembly [NS], - BLQ carriage recirculating bearing with magnet with 06985 Assembly, - LSQ / BLQ recirculating bearing block

       
    CS-X housing assembly with bearings
    P/N: CS-0698X

    $889.88 
       
  • CS-X housing assembly
    CS-X housing assembly

    CS-X housing assembly

    $222.47
    P/N: CS-0698X

    Sample Dilution System

    SPECIFICATIONS
    Gilson 1 ml syringe
       
    Sample Dilution System
    P/N: CS-0698X

    $222.47 
       
  • Travel Costs
    Travel Costs

    Travel Costs

    $3,950.00
    P/N: CS-TRAVEL


       
    Travel costs for installation, training, preventive maintenance and/or calibration.
    P/N: CS-TRAVEL

    $3,950.00 
       
  • Installation & Training
    Installation & Training

    Installation & Training

    $3,950.00
    P/N: CS-HVA-2-INST


       
    Installation and training for CINRG CS-HVA-2 system (4 days on-site).
    P/N: CS-HVA-2-INST

    $3,950.00 
       
  • Houillon Viscometer Automation System (2-bath)
    Houillon Viscometer Automation System (2-bath)

    Houillon Viscometer Automation System (2-bath)

    $69,000.00
    P/N: CS-HVA-2

    Robotic automation system for 1 to 2 Houillon Viscometer instruments. See Addendum A for Instrument Specifications, and Addendum B for Terms & Conditions.

       
    Robotic automation system for 1 or 2 Houillon Viscometer instruments. See Addendum A for Instrument Specifications, and Addendum B for Terms & Conditions.
    P/N: CS-HVA-2

    $69,000.00 
       
  • 25ml Syringe Piston Seal
    25ml Syringe Piston Seal

    25ml Syringe Piston Seal

    $263.33
    P/N: CS-S25PS

    CS-APC-2 Genuine Spare Parts

    SPECIFICATIONS
    Piston seal replacement for CS-S25 25 ml syringe
       
    CS-APC-2 Genuine Spare Parts
    P/N: CS-S25PS

    $263.33 
       
  • CS-APC-2/3/22M Calibration
    CS-APC-2/3/22M Calibration

    CS-APC-2/3/22M Calibration

    $800.00
    P/N: CS-CAL-APC

    Calibration of a CINRG CS-APC-2, CS-APC-3 or CS-APC-22M automated particle counting instrument, including noise, PSL and 2806 calibration services.

       
    On-site calibration for your CINRG CS-APC-2, CS-APC-3 or CS-APC-22M automated particle counting instrument
    P/N: CS-CAL-APC

    $800.00 
       
  • CS-APC-22M Preventive Maintenance
    CS-APC-22M Preventive Maintenance

    CS-APC-22M Preventive Maintenance

    $1,050.00
    P/N: CS-PM-APC22M


       
    On-site maintenance for your CINRG CS-APC-22M automated particle counting instrument
    P/N: CS-PM-APC22M

    $1,050.00 
       
  • CS-APC-2 / CS-APC-3 Preventive Maintenance
    CS-APC-2 / CS-APC-3 Preventive Maintenance

    CS-APC-2 / CS-APC-3 Preventive Maintenance

    $1,250.00
    P/N: CS-PM-APC2


       
    On-site maintenance for your CINRG CS-APC-2 or CS-APC-3 automated particle counting instrument
    P/N: CS-PM-APC2

    $1,250.00 
       
  • CS-HVA-1 Preventive Maintenance
    CS-HVA-1 Preventive Maintenance

    CS-HVA-1 Preventive Maintenance

    $1,175.00
    P/N: CS-PM-HVA1


       
    On-site maintenance for your CINRG CS-HVA-1 Houillon viscometer robotic system
    P/N: CS-PM-HVA1

    $1,175.00 
       
  • On-Site Instrument Disassembly and Assembly Services
    On-Site Instrument Disassembly and Assembly Services

    On-Site Instrument Disassembly and Assembly Services

    $5,950.00
    P/N: CS-SERV-DAS


       
    CINRG instrumentation disassembly and reassembly services
    P/N: CS-SERV-DAS

    $5,950.00 
       
  • High Flow L Valve, 3/4" - 16 JIC Fem Swivel w/ 24" Tube, All 316 SS
    High Flow L Valve, 3/4" - 16 JIC Fem Swivel w/ 24" Tube, All 316 SS

    High Flow L Valve, 3/4" - 16 JIC Fem Swivel w/ 24" Tube, All 316 SS

    $231.01
    P/N: L8JFSRTRS24

    High Flow L Valve, 3/4 inch - 16 JIC Fem Swivel w/ 24 inch Tube, All 316 SS

       
    High Flow L Valve, 3/4 inch - 16 JIC Fem Swivel w/ 24 inch Tube, All 316 SS
    P/N: L8JFSRTRS24

    $231.01 
       
  • High Flow L Valve, 3/4" - 16 JIC Fem Swivel w/ 18" Tube, All 316 SS
    High Flow L Valve, 3/4" - 16 JIC Fem Swivel w/ 18" Tube, All 316 SS

    High Flow L Valve, 3/4" - 16 JIC Fem Swivel w/ 18" Tube, All 316 SS

    $225.40
    P/N: L8JFSRTRS18

    High Flow L Valve, 3/4 inch - 16 JIC Fem Swivel w/ 18 inch Tube, All 316 SS

       
    High Flow L Valve, 3/4 inch - 16 JIC Fem Swivel w/ 18 inch Tube, All 316 SS
    P/N: L8JFSRTRS18

    $225.40 
       
  • High Flow L Valve, 3/4" - 16 JIC Fem Swivel w/ 12" Tube, All 316 SS
    High Flow L Valve, 3/4" - 16 JIC Fem Swivel w/ 12" Tube, All 316 SS

    High Flow L Valve, 3/4" - 16 JIC Fem Swivel w/ 12" Tube, All 316 SS

    $219.81
    P/N: L8JFSRTRS12

    High Flow L Valve, 3/4 inch - 16 JIC Fem Swivel w/ 12 inch Tube, All 316 SS

       
    High Flow L Valve, 3/4 inch - 16 JIC Fem Swivel w/ 12 inch Tube, All 316 SS
    P/N: L8JFSRTRS12

    $219.81 
       
  • High Flow L Valve, 3/4" - 16 JIC Fem Swivel w/ 24" SS Tube
    High Flow L Valve, 3/4" - 16 JIC Fem Swivel w/ 24" SS Tube

    High Flow L Valve, 3/4" - 16 JIC Fem Swivel w/ 24" SS Tube

    $89.44
    P/N: L8JFSTRS24

    High Flow L Valve, 3/4 inch - 16 JIC Fem Swivel w/ 24 inch SS Tube

       
    High Flow L Valve, 3/4 inch - 16 JIC Fem Swivel w/ 24 inch SS Tube
    P/N: L8JFSTRS24

    $89.44 
       
  • High Flow L Valve, 3/4" - 16 JIC Fem Swivel w/ 18" SS Tube
    High Flow L Valve, 3/4" - 16 JIC Fem Swivel w/ 18" SS Tube

    High Flow L Valve, 3/4" - 16 JIC Fem Swivel w/ 18" SS Tube

    $83.85
    P/N: L8JFSTRS18

    High Flow L Valve, 3/4 inch - 16 JIC Fem Swivel w/ 18 inch SS Tube

       
    High Flow L Valve, 3/4 inch - 16 JIC Fem Swivel w/ 18 inch SS Tube
    P/N: L8JFSTRS18

    $83.85 
       
  • High Flow L Valve, 3/4" - 16 JIC Fem Swivel w/ 12" SS Tube
    High Flow L Valve, 3/4" - 16 JIC Fem Swivel w/ 12" SS Tube

    High Flow L Valve, 3/4" - 16 JIC Fem Swivel w/ 12" SS Tube

    $78.24
    P/N: L8JFSTRS12

    High Flow L Valve, 3/4 inch - 16 JIC Fem Swivel w/ 12 inch SS Tube

       
    High Flow L Valve, 3/4 inch - 16 JIC Fem Swivel w/ 12 inch SS Tube
    P/N: L8JFSTRS12

    $78.24 
       
  • LP Pushbutton Valve, 9/16" - 18 ORB, w/ Lock Nut, Viton, 316 SS
    LP Pushbutton Valve, 9/16" - 18 ORB, w/ Lock Nut, Viton, 316 SS

    LP Pushbutton Valve, 9/16" - 18 ORB, w/ Lock Nut, Viton, 316 SS

    $135.38
    P/N: LPL6U-R

    The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

       
    The KP Series Sampling valve allows for sample taking at the inchpush of a button inch.
    P/N: LPL6U-R

    $135.38 
       
  • Pushbutton Valve, 7/16" - 20 ORB, Viton, All Stainles
    Pushbutton Valve, 7/16" - 20 ORB, Viton, All Stainles

    Pushbutton Valve, 7/16" - 20 ORB, Viton, All Stainles

    $131.95
    P/N: KP716UV-R

    The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

    SPECIFICATIONS
    Body Component: Carbon Steel, Button/Spout/Cap: Brass, Seals: Viton, Spring: Carbon Steel, Thread Size: 7/16 ORB, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
       
    The KP Series Sampling valve allows for sample taking at the inchpush of a button inch.
    P/N: KP716UV-R

    $131.95 
       
  • 1YR - Preventive Maintenance & Calibration Service Contract
    1YR - Preventive Maintenance & Calibration Service Contract

    1YR - Preventive Maintenance & Calibration Service Contract

    $1,850.00
    P/N: CS-APC-22M-MC


       
    On-site maintenance and calibration for your CINRG CS-APC-22M mini-automated particle counting instrument
    P/N: CS-APC-22M-MC

    $1,850.00 
       
  • CINStan Super Clean Fluid (400 ml)
    CINStan Super Clean Fluid (400 ml)

    CINStan Super Clean Fluid (400 ml)

    $102.50
    P/N: CS-CINSTAN-SCF

    1 x CS-CINSTAN-SCF - CINStan Super Clean Fluid (400 ml)

    SPECIFICATIONS
    CS-CINSTAN-SCF : no expiry.
       
    Super Clean Fluid suitable for calibrating a particle counting instrument.
    P/N: CS-CINSTAN-SCF

    $102.50 
       
  • CINStan 2806d Calibration Fluid (400 ml)
    CINStan 2806d Calibration Fluid (400 ml)

    CINStan 2806d Calibration Fluid (400 ml)

    $300.00
    P/N: CS-CINSTAN-2806

    1 x CS-CINSTAN-2806 - CINStan 2806d Calibration Fluid (400 ml)

    SPECIFICATIONS
    CS-CINSTAN-2806 : Expires 24 months from date of production (minimum 12 months with customer).,
       
    NIST traceable standard reference material for calibrating a particle counting instrument.
    P/N: CS-CINSTAN-2806

    $300.00 
       
  • ICM In-line Contamination Monitor ICM0NKRG1 2.0
    ICM In-line Contamination Monitor ICM0NKRG1 2.0

    ICM In-line Contamination Monitor ICM0NKRG1 2.0

    $3,701.71
    P/N: ICM0NKRG1-2.0

    The ICM automatically measures and displays particulate contamination, moisture and temperature levels in various hydraulic fluids. It is designed specifically to be mounted directly to systems, where ongoing measurement or analysis is required, and where space and costs are limited.

    SPECIFICATIONS
    Voltage 9V-36V DC
       
    A unique high accuracy, fully portable product.
    P/N: ICM0NKRG1-2.0

    $3,701.71 
       
  • LPA3 Portable Particle Counter
    LPA3 Portable Particle Counter

    LPA3 Portable Particle Counter

    $15,703.71
    P/N: LPA300N101

    The LPA3 was designed to replace the LPA2. The customer should find only improvements in terms of performance. MP Filtri fts next-generation LPA3 delivers a fast, accurate and comprehensive hydraulic health check in a robust yet portable package. Featuring the latest breakthroughs in optical and...

    SPECIFICATIONS
    Technology: LED based light extinction automatic optical particle counter Particle Sizing: >4, >6, >14, >21, >25, >38, >50, >70 µm(c) Analysis Range:ISO 4406:2017 Code 8 to 24 NAS 1638 Class 2 to 12 AS4059/ISO11218 Rev E, Table 1 Size Codes 2-12 AS4059/ISO11218 Rev E, Table 2 Size Codes, A:000 to 12,...
       
    A unique high accuracy, fully portable product. For users of hydraulic, lubrication and transmission systems. The LPA3 is a highly accurate, portable laser particle analyser that counts and sizes particles of solid contaminants in fluid
    P/N: LPA300N101

    $15,703.71 
       
  • 90 Position Rack
    90 Position Rack

    90 Position Rack

    $150.00
    P/N: CS-RACK-90

    Matches footplate positioning cut-outs and tube positions for Bel-Art F18745-0023, Perkin Elmer N0777245 and N0777154 racks, Teledyne CETAC 450362 and SP6255 90-position racks.

       
    Sample uptake needle for CINRG Houillon Viscometer Automation system
    P/N: CS-RACK-90

    $150.00 
       
  • 6" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid
    6" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

    6" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

    $69.44
    P/N: L14NTR6

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 15cm Stainless Steel (6 inch), Adapter: Fixed 1/4 inch Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NTR6

    $69.44 
       
  • LPA3 Portable Particle Counter
    LPA3 Portable Particle Counter

    LPA3 Portable Particle Counter

    $18,116.14
    P/N: LPA3-0-0-S-101

    The LPA3 was designed to replace the LPA2. The customer should find only improvements in terms of performance. MP Filtri fts next-generation LPA3 delivers a fast, accurate and comprehensive hydraulic health check in a robust yet portable package. Featuring the latest breakthroughs in optical and...

    SPECIFICATIONS
    Technology: LED based light extinction automatic optical particle counter Particle Sizing: >4, >6, >14, >21, >25, >38, >50, >70 µm(c) Analysis Range:ISO 4406:2017 Code 8 to 24 NAS 1638 Class 2 to 12 AS4059/ISO11218 Rev E, Table 1 Size Codes 2-12 AS4059/ISO11218 Rev E, Table 2 Size Codes, A:000 to 12,...
       
    A unique high accuracy, fully portable product. For users of hydraulic, lubrication and transmission systems. The LPA3 is a highly accurate, portable laser particle analyser that counts and sizes particles of solid contaminants in fluid
    P/N: LPA3-0-0-S-101

    $18,116.14 
       
  • Automated Particle Counter with Auto-Leveling/Dilution
    Automated Particle Counter with Auto-Leveling/Dilution

    Automated Particle Counter with Auto-Leveling/Dilution

    $62,000.00
    P/N: CS-APC-3

    The world`s first automated, auto-leveling, auto-diluting particle counter that conforms to ASTM D7647-10 (ISO 11171 Calibrated). See Addendum A for Instrument Specifications, and Addendum B for Terms & Conditions.

       
    The world`s first automated, auto-leveling, auto-diluting particle counter that conforms to ASTM D7647-10 (ISO 11171 Calibrated). See Addendum A for Instrument Specifications, and Addendum B for Terms & Conditions.
    P/N: CS-APC-3

    $62,000.00 
       
  • High Flow L Valve, 3/8" - 18 NPTF, JIC Female Swivel w/ 12" Tube, All 316 SS
    High Flow L Valve, 3/8" - 18 NPTF, JIC Female Swivel w/ 12" Tube, All 316 SS

    High Flow L Valve, 3/8" - 18 NPTF, JIC Female Swivel w/ 12" Tube, All 316 SS

    $254.82
    P/N: L6NRTRS12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L6NRTRS12

    $254.82 
       
  • Wired Connected Breather power-data cable: M8 Right Angle Female, 4 Position Connector x Wire Leads,
    Wired Connected Breather power-data cable: M8 Right Angle Female, 4 Position Connector x Wire Leads,

    Wired Connected Breather power-data cable: M8 Right Angle Female, 4 Position Connector x Wire Leads,

    $46.05
    P/N: CB-01-03


       
    Wired Connected Breather power-data cable: M8 Right Angle Female, 4 Position Connector x Wire Leads, 10 ft Cable Assembly
    P/N: CB-01-03

    $46.05 
       
  • Moisture Content Sensor Display
    Moisture Content Sensor Display

    Moisture Content Sensor Display

    $794.76
    P/N: MCD-S-1


       
    Moisture Content Sensor Display
    P/N: MCD-S-1

    $794.76 
       
  • Moisture Content Sensor Power Data Cable, 8-pin connection, 33ft / 10m
    Moisture Content Sensor Power Data Cable, 8-pin connection, 33ft / 10m

    Moisture Content Sensor Power Data Cable, 8-pin connection, 33ft / 10m

    $165.63
    P/N: MCC-2-B-100


       
    Moisture Content Sensor Power Data Cable, 8-pin connection, 33ft / 10m
    P/N: MCC-2-B-100

    $165.63 
       
  • Moisture Content Sensor Power Data Cable, 8-pins connection, 10ft / 3m
    Moisture Content Sensor Power Data Cable, 8-pins connection, 10ft / 3m

    Moisture Content Sensor Power Data Cable, 8-pins connection, 10ft / 3m

    $88.33
    P/N: MCC-2-B-030


       
    Moisture Content Sensor Power Data Cable, 8-pins connection, 10ft / 3m
    P/N: MCC-2-B-030

    $88.33 
       
  • Conversion cable OQD to Gen 2 connection
    Conversion cable OQD to Gen 2 connection

    Conversion cable OQD to Gen 2 connection

    $98.59
    P/N: OQC2-CON-B


       
    Conversion cable OQD to Gen 2 connection
    P/N: OQC2-CON-B

    $98.59 
       
  • Conversion cable OQS 2  to Gen 1 connection
    Conversion cable OQS 2  to Gen 1 connection

    Conversion cable OQS 2 to Gen 1 connection

    $94.65
    P/N: OQC2-CON-A


       
    Conversion cable OQS 2 to Gen 1 connection
    P/N: OQC2-CON-A

    $94.65 
       
  • Oil Quality Sensor 2 configuration cable USB - RS485
    Oil Quality Sensor 2 configuration cable USB - RS485

    Oil Quality Sensor 2 configuration cable USB - RS485

    $524.54
    P/N: OQC2-USB-01


       
    Oil Quality Sensor 2 configuration cable USB - RS485
    P/N: OQC2-USB-01

    $524.54 
       
  • Oil Quality Display - power data cable 6.5ft/ 2m
    Oil Quality Display - power data cable 6.5ft/ 2m

    Oil Quality Display - power data cable 6.5ft/ 2m

    $83.77
    P/N: OQC2-C-02


       
    Oil Quality Display - power data cable 6.5ft/ 2m
    P/N: OQC2-C-02

    $83.77 
       
  • Oil Quality Sensor Cable OQS 2 to OQD connection, 10 meter
    Oil Quality Sensor Cable OQS 2 to OQD connection, 10 meter

    Oil Quality Sensor Cable OQS 2 to OQD connection, 10 meter

    $228.73
    P/N: OQC2-B-10


       
    Oil Quality Sensor Cable OQS 2 to OQD connection, 10 meter
    P/N: OQC2-B-10

    $228.73 
       
  • Oil Quality Sensor 2 - power data cable 33ft/ 10m
    Oil Quality Sensor 2 - power data cable 33ft/ 10m

    Oil Quality Sensor 2 - power data cable 33ft/ 10m

    $155.11
    P/N: OQC2-A-10


       
    Oil Quality Sensor 2 - power data cable 33ft/ 10m
    P/N: OQC2-A-10

    $155.11 
       
  • Flow Control Assembly for CMS: 0,20 l/min, 1/4"BSP m inlet, M16x2 outlet, HEX body, 14-420 bar
    Flow Control Assembly for CMS: 0,20 l/min, 1/4"BSP m inlet, M16x2 outlet, HEX body, 14-420 bar

    Flow Control Assembly for CMS: 0,20 l/min, 1/4"BSP m inlet, M16x2 outlet, HEX body, 14-420 bar

    $253.40
    P/N: FCV-A


       
    Flow Control Assembly for CMS: 0,20 l/min, 1/4 inchBSP m inlet, M16x2 outlet, HEX body, 14-420 bar
    P/N: FCV-A

    $253.40 
       
  • Fluid Level Sight Glass - 2" NPT
    Fluid Level Sight Glass - 2" NPT

    Fluid Level Sight Glass - 2" NPT

    $62.47
    P/N: SLW-32


    SPECIFICATIONS
    Thread Sizes: 2 inch NPT, Outside Diameter: 0.94 inch, Length from last Thread: 0.32 inch, Max operating pressure: 170 bar / 2500 psi
       
    Fluid Level Sight Glasses
    P/N: SLW-32

    $62.47 
       
  • CINStan Calibration Kit
    CINStan Calibration Kit

    CINStan Calibration Kit

    $1,500.00
    P/N: CS-CINSTAN-CFK

    The CINRG CinStan Calibration Fluids Kit is suitable for a single calibration of an optical particle counting instrument (i.e. CS-APC-2, CS-APC-3 or CS-APC-22M instrument). The kit includes; 1 x CS-CINSTAN-2806 - CINStan 2806d Calibration Fluid (400 ml) 1 x CS-CINSTAN-SCF - CINStan Super Clean Fluid...

    SPECIFICATIONS
    CS-CINSTAN-2806 : 24 months from date of production (minimum 12 months with customer)., CS-CINSTAN-PSL40, PSL70 & PSL100 : 90 days from date of production (minimum 60 days with customer)., CS-CINSTAN-SCF : no expiry.
       
    NIST traceable standard reference material and PSL standards blended in Super Clean Fluid suitable for calibrating a particle counting instrument.
    P/N: CS-CINSTAN-CFK

    $1,500.00 
       
  • Connector Syringe pump to Klotz Sensor
    Connector Syringe pump to Klotz Sensor

    Connector Syringe pump to Klotz Sensor

    $23.60
    P/N: CS-S2S-2

    CS-APC-2 Genuine Spare Parts

    SPECIFICATIONS
    Connector Syringe pump to Klotz Sensor
       
    CS-APC-2 Genuine Spare Parts
    P/N: CS-S2S-2

    $23.60 
       
  • Syringe Pump Opto Detector
    Syringe Pump Opto Detector

    Syringe Pump Opto Detector

    $216.04
    P/N: CS-PPOD

    Syringe Pump Opto Detector

       
    Syringe Pump Opto Detector
    P/N: CS-PPOD

    $216.04 
       
  • Gilson 1 ml syringe
    Gilson 1 ml syringe

    Gilson 1 ml syringe

    $545.97
    P/N: CS-S01

    Sample Dilution System

    SPECIFICATIONS
    Gilson 1 ml syringe
       
    Sample Dilution System
    P/N: CS-S01

    $545.97 
       
  • Needle drip removal cylinder
    Needle drip removal cylinder

    Needle drip removal cylinder

    $60.00
    P/N: CS-SDS-DRC


    SPECIFICATIONS
    Needle drip removal cylinder
       
    Needle drip removal cylinder
    P/N: CS-SDS-DRC

    $60.00 
       
  • Needle Z axis Mounting
    Needle Z axis Mounting

    Needle Z axis Mounting

    $187.50
    P/N: CS-SDS-NMZ


    SPECIFICATIONS
    Needle Z axis Mounting
       
    Needle Z axis Mounting
    P/N: CS-SDS-NMZ

    $187.50 
       
  • Sample Needle Header
    Sample Needle Header

    Sample Needle Header

    $112.50
    P/N: CS-HVA-SNH-01

    Samle Needle Header for CINRG Houillon Viscometer Automation system

    SPECIFICATIONS
    Samle Needle Header
       
    Samle Needle Header for CINRG Houillon Viscometer Automation system
    P/N: CS-HVA-SNH-01

    $112.50 
       
  • [7614] Timing Belt for BLQ0295.
    [7614] Timing Belt for BLQ0295.

    [7614] Timing Belt for BLQ0295.

    $18.90
    P/N: CS-TB0295

    CS-HVA-1 Genuine Spare Parts

    SPECIFICATIONS
    [7614] Timing Belt for BLQ0295.
       
    CS-HVA-1 Genuine Spare Parts
    P/N: CS-TB0295

    $18.90 
       
  • [7558]Timing Belt for BLQ3000.
    [7558]Timing Belt for BLQ3000.

    [7558]Timing Belt for BLQ3000.

    $60.20
    P/N: CS-TB3000

    CS-HVA-1 Genuine Spare Parts

    SPECIFICATIONS
    [7558]Timing Belt for BLQ3000.
       
    CS-HVA-1 Genuine Spare Parts
    P/N: CS-TB3000

    $60.20 
       
  • 10ml SYRINGE
    10ml SYRINGE

    10ml SYRINGE

    $647.48
    P/N: CS-S10

    CS-HVA-1 Genuine Spare Parts

    SPECIFICATIONS
    10ml SYRINGE
       
    CS-HVA-1 Genuine Spare Parts
    P/N: CS-S10

    $647.48 
       
  • Grease in 6ml Syringe for Zaber recirculating bearings
    Grease in 6ml Syringe for Zaber recirculating bearings

    Grease in 6ml Syringe for Zaber recirculating bearings

    $28.00
    P/N: CS-SG133

    CS-APC-2 Genuine Spare Parts

    SPECIFICATIONS
    Grease in 6ml Syringe for Zaber recirculating bearings
       
    CS-APC-2 Genuine Spare Parts
    P/N: CS-SG133

    $28.00 
       
  • Tubing Kit -25ft.
    Tubing Kit -25ft.

    Tubing Kit -25ft.

    $221.56
    P/N: CS-TK-25

    CS-APC-2 Genuine Spare Parts

    SPECIFICATIONS
    Tubing Kit -25ft.
       
    CS-APC-2 Genuine Spare Parts
    P/N: CS-TK-25

    $221.56 
       
  • Flanging Tool and Tubing Kit -25ft
    Flanging Tool and Tubing Kit -25ft

    Flanging Tool and Tubing Kit -25ft

    $568.18
    P/N: CS-FTTK-25

    CS-APC-2 Genuine Spare Parts

    SPECIFICATIONS
    Flanging Tool and Tubing Kit -25ft
       
    CS-APC-2 Genuine Spare Parts
    P/N: CS-FTTK-25

    $568.18 
       
  • PTFE Tubing 1/8" x 0.085" - 25ft
    PTFE Tubing 1/8" x 0.085" - 25ft

    PTFE Tubing 1/8" x 0.085" - 25ft

    $162.40
    P/N: CS-T1808-25

    CS-APC-2 Genuine Spare Parts

    SPECIFICATIONS
    PTFE Tubing 1/8 inch x 0.085 inch - 25ft
       
    CS-APC-2 Genuine Spare Parts
    P/N: CS-T1808-25

    $162.40 
       
  • Tube Clamps for in-line filter - pack of 20
    Tube Clamps for in-line filter - pack of 20

    Tube Clamps for in-line filter - pack of 20

    $20.92
    P/N: CS-TCIF-20

    CS-APC-2 Genuine Spare Parts

    SPECIFICATIONS
    Tube Clamps for in-line filter - pack of 20
       
    CS-APC-2 Genuine Spare Parts
    P/N: CS-TCIF-20

    $20.92 
       
  • Viton "O" Rings for in-line filter -pack of 50
    Viton "O" Rings for in-line filter -pack of 50

    Viton "O" Rings for in-line filter -pack of 50

    $26.43
    P/N: CS-VORIF-20

    CS-APC-2 Genuine Spare Parts

    SPECIFICATIONS
    Viton inchO inch Rings for in-line filter -pack of 50
       
    CS-APC-2 Genuine Spare Parts
    P/N: CS-VORIF-20

    $26.43 
       
  • Replacement filter screens (10 pcs)
    Replacement filter screens (10 pcs)

    Replacement filter screens (10 pcs)

    $15.00
    P/N: CS-GPM-4150-10

    CS-APC-2 Genuine Spare Parts

    SPECIFICATIONS
    Replacement filter screens (10 pcs)
       
    CS-APC-2 Genuine Spare Parts
    P/N: CS-GPM-4150-10

    $15.00 
       
  • In-line filter housing
    In-line filter housing

    In-line filter housing

    $35.00
    P/N: CS-GPM-4150R

    CS-APC-2 Genuine Spare Parts

    SPECIFICATIONS
    In-line filter housing
       
    Newly designed in-line filter housing for CS-APC-2, CS-APC-3 and CS-APC-22M instruments
    P/N: CS-GPM-4150R

    $35.00 
       
  • Sampling Head with uptake needle and solvent needle.
    Sampling Head with uptake needle and solvent needle.

    Sampling Head with uptake needle and solvent needle.

    $574.00
    P/N: CS-SHWN

    CS-APC-2 Genuine Spare Parts

    SPECIFICATIONS
    Sampling Head with uptake needle and solvent needle.
       
    CS-APC-2 Genuine Spare Parts
    P/N: CS-SHWN

    $574.00 
       
  • Stirring Paddle (Four blade)
    Stirring Paddle (Four blade)

    Stirring Paddle (Four blade)

    $218.40
    P/N: CS-SP-04

    CS-APC-2 Genuine Spare Parts

    SPECIFICATIONS
    Stirring Paddle (Four blade)
       
    CS-APC-2 Genuine Spare Parts
    P/N: CS-SP-04

    $218.40 
       
  • 30 ml Sample cups (Bulk orders FOB McHenry, IL )*
    30 ml Sample cups (Bulk orders FOB McHenry, IL )*

    30 ml Sample cups (Bulk orders FOB McHenry, IL )*

    $86.13
    P/N: APCSC5000US


    SPECIFICATIONS
    Case: 5000 cups/case, Packaged: 50 sleeves of 100 cups, Cube Dimension: 1.20, Cases per Skid: 50
       
    1 oz Graduated Medicine cup (packed in a case of 5000 cups).
    P/N: APCSC5000US

    $86.13 
       
  • Viton "O" Ring set  for LDS sensors (8 pieces )
    Viton "O" Ring set  for LDS sensors (8 pieces )

    Viton "O" Ring set for LDS sensors (8 pieces )

    $15.00
    P/N: CS-VORLDS-8

    CS-APC-2 Genuine Spare Parts

    SPECIFICATIONS
    Viton inchO inch Ring set for LDS sensors (8 pieces )
       
    CS-APC-2 Genuine Spare Parts
    P/N: CS-VORLDS-8

    $15.00 
       
  • Micro cleaning brush for LDS45/50 Sensor
    Micro cleaning brush for LDS45/50 Sensor

    Micro cleaning brush for LDS45/50 Sensor

    $75.30
    P/N: CS-MB-1

    Micro cleaning brush for LDS45/50 Sensor

       
    Micro cleaning brush for LDS45/50 Sensor
    P/N: CS-MB-1

    $75.30 
       
  • 24V DC Soleniod Valve with housing
    24V DC Soleniod Valve with housing

    24V DC Soleniod Valve with housing

    $460.82
    P/N: CS-24SVH

    24V DC Soleniod Valve with housing

       
    24V DC Soleniod Valve with housing
    P/N: CS-24SVH

    $460.82 
       
  • Valve Position Opto Detector
    Valve Position Opto Detector

    Valve Position Opto Detector

    $176.81
    P/N: CS-VPOD

    Valve Position Opto Detector

       
    Valve Position Opto Detector
    P/N: CS-VPOD

    $176.81 
       
  • 4000 Series Drive Module, WO/Valve.
    4000 Series Drive Module, WO/Valve.

    4000 Series Drive Module, WO/Valve.

    $2,692.92
    P/N: CS-DM4000

    4000 Series Drive Module, WO/Valve.

       
    4000 Series Drive Module, WO/Valve.
    P/N: CS-DM4000

    $2,692.92 
       
  • Verity 4220 Dual Syringe Pump with GSIOC DIN
    Verity 4220 Dual Syringe Pump with GSIOC DIN

    Verity 4220 Dual Syringe Pump with GSIOC DIN

    $7,829.16
    P/N: CS-4220-GD

    Verity 4220 Dual Syringe Pump with GSIOC DIN

       
    Verity 4220 Dual Syringe Pump with GSIOC DIN
    P/N: CS-4220-GD

    $7,829.16 
       
  • Syringe Pump Opto Detector
    Syringe Pump Opto Detector

    Syringe Pump Opto Detector

    $216.04
    P/N: CS-SPOD

    Syringe Pump Opto Detector

       
    Syringe Pump Opto Detector
    P/N: CS-SPOD

    $216.04 
       
  • PCBA, 4000 Series Syringe Pump (Verity Pump)
    PCBA, 4000 Series Syringe Pump (Verity Pump)

    PCBA, 4000 Series Syringe Pump (Verity Pump)

    $633.64
    P/N: CS-VP4000

    PCBA, 4000 Series Syringe Pump (Verity Pump)

       
    PCBA, 4000 Series Syringe Pump (Verity Pump)
    P/N: CS-VP4000

    $633.64 
       
  • M16x2 Valve, 1/4" - 18 NPTF, Viton, SS
    M16x2 Valve, 1/4" - 18 NPTF, Viton, SS

    M16x2 Valve, 1/4" - 18 NPTF, Viton, SS

    $74.78
    P/N: B14N-RV

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    M16x2 Valve, 1/4 inch - 18 NPTF, Viton, SS
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: B14N-RV

    $74.78 
       
  • Klotz Particle Count Sensor "Repair"
    Klotz Particle Count Sensor "Repair"

    Klotz Particle Count Sensor "Repair"

    $2,300.00
    P/N: CS-LDS-4550-REP

    Klotz Particle Count Sensor inchRepair inch

       
    Klotz Particle Count Sensor inchRepair inch
    P/N: CS-LDS-4550-REP

    $2,300.00 
       
  • Lenovo Tiny PC & 27" Monitor
    Lenovo Tiny PC & 27" Monitor

    Lenovo Tiny PC & 27" Monitor

    $1,950.00
    P/N: CS-COMP-27

    Lenovo Tiny PC & 27 inch Monitor

       
    Lenovo Tiny PC & 27 inch Monitor
    P/N: CS-COMP-27

    $1,950.00 
       
  • Lenovo Tiny PC & 24" Monitor
    Lenovo Tiny PC & 24" Monitor

    Lenovo Tiny PC & 24" Monitor

    $1,650.00
    P/N: CS-COMP-24

    Lenovo Tiny PC & 24 inch Monitor

       
    Lenovo Tiny PC & 24 inch Monitor
    P/N: CS-COMP-24

    $1,650.00 
       
  • High Flow M16x2 Valve, 1/4" -18 NPTF, Swivel w/ 24" SS Tube
    High Flow M16x2 Valve, 1/4" -18 NPTF, Swivel w/ 24" SS Tube

    High Flow M16x2 Valve, 1/4" -18 NPTF, Swivel w/ 24" SS Tube

    $112.40
    P/N: M4NTRS24

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: M4NTRS24

    $112.40 
       
  • LPA3 Portable Particle Counter with RH Sensor
    LPA3 Portable Particle Counter with RH Sensor

    LPA3 Portable Particle Counter with RH Sensor

    $16,489.94
    P/N: LPA3-W-P-M-101

    The LPA3 was designed to replace the LPA2. The customer should find only improvements in terms of performance. MP Filtri fts next-generation LPA3 delivers a fast, accurate and comprehensive hydraulic health check in a robust yet portable package. Featuring the latest breakthroughs in optical and...

    SPECIFICATIONS
    Technology: LED based light extinction automatic optical particle counter Particle Sizing: >4, >6, >14, >21, >25, >38, >50, >70 µm(c) Analysis Range:ISO 4406:2017 Code 8 to 24 NAS 1638 Class 2 to 12 AS4059/ISO11218 Rev E, Table 1 Size Codes 2-12 AS4059/ISO11218 Rev E, Table 2 Size Codes, A:000 to 12,...
       
    A unique high accuracy, fully portable product. For users of hydraulic, lubrication and transmission systems. The LPA3 is a highly accurate, portable laser particle analyser that counts and sizes particles of solid contaminants in fluid
    P/N: LPA3-W-P-M-101

    $16,489.94 
       
  • M16x2 Valve, 1/4 NPTF, FORM D, Steel
    M16x2 Valve, 1/4 NPTF, FORM D, Steel

    M16x2 Valve, 1/4 NPTF, FORM D, Steel

    $19.96
    P/N: B14N

    M16x2 Valve, 1/4 NPTF, FORM D, Steel

       
    These high quality, leak-proof gauge plugs are suitable for installation on any pressurized lubricant point.
    P/N: B14N

    $19.96 
       
  • 500ml bottle sampling unit for phosphate esters only
    500ml bottle sampling unit for phosphate esters only

    500ml bottle sampling unit for phosphate esters only

    $6,757.79
    P/N: BSU500E0SUS


       
    500ml bottle sampling unit for phosphate esters only
    P/N: BSU500E0SUS

    $6,757.79 
       
  • 110ml bottle sampling unit suitable mineral & synthetic oils
    110ml bottle sampling unit suitable mineral & synthetic oils

    110ml bottle sampling unit suitable mineral & synthetic oils

    $3,216.00
    P/N: BSU110PLPCM


       
    110ml bottle sampling unit suitable mineral & synthetic oils
    P/N: BSU110PLPCM

    $3,216.00 
       
  • Portable Laser Particle Counter
    Portable Laser Particle Counter

    Portable Laser Particle Counter

    $21,502.72
    P/N: PLPC-0-S-C-0


       
    Portable Laser Particle Counter Without moisture and temperature sensor for phosphate ester & aggressive fluids
    P/N: PLPC-0-S-C-0

    $21,502.72 
       
  • Portable Laser Particle Counter
    Portable Laser Particle Counter

    Portable Laser Particle Counter

    $20,028.66
    P/N: PLPC-0-N-C-0


       
    Without moisture and temperature sensor for water glycol
    P/N: PLPC-0-N-C-0

    $20,028.66 
       
  • Portable Laser Particle Counter
    Portable Laser Particle Counter

    Portable Laser Particle Counter

    $18,732.70
    P/N: PLPC-0-M-C-0


       
    Without moisture and temperature sensor for mineral oil
    P/N: PLPC-0-M-C-0

    $18,732.70 
       
  • Portable Laser Particle Counter
    Portable Laser Particle Counter

    Portable Laser Particle Counter

    $19,553.71
    P/N: PLPC-W-M-C-0


       
    With moisture and temperature sensor for mineral oil
    P/N: PLPC-W-M-C-0

    $19,553.71 
       
  • Oil Quality Sensor Cable OQS 2 to OQD connection, 2 meter
    Oil Quality Sensor Cable OQS 2 to OQD connection, 2 meter

    Oil Quality Sensor Cable OQS 2 to OQD connection, 2 meter

    $143.28
    P/N: OQC2-B-02


       
    Oil Quality Sensor Cable OQS 2 to OQD connection, 2 meter
    P/N: OQC2-B-02

    $143.28 
       
  • Oil Quality Sensor 2 - power data cable 6.5ft/ 2m
    Oil Quality Sensor 2 - power data cable 6.5ft/ 2m

    Oil Quality Sensor 2 - power data cable 6.5ft/ 2m

    $89.39
    P/N: OQC2-A-02


       
    Oil Quality Sensor 2 - power data cable 6.5ft/ 2m
    P/N: OQC2-A-02

    $89.39 
       
  • OQS display with data logger
    OQS display with data logger

    OQS display with data logger

    $1,430.16
    P/N: OQD-S-1


       
    OQS display with data logger
    P/N: OQD-S-1

    $1,430.16 
       
  • Oil Quality Sensor 2, 1/2"BSP, RS485, 4-20mA, CAN bus, Modbus
    Oil Quality Sensor 2, 1/2"BSP, RS485, 4-20mA, CAN bus, Modbus

    Oil Quality Sensor 2, 1/2"BSP, RS485, 4-20mA, CAN bus, Modbus

    $1,497.25
    P/N: OQS2-01-A-V


       
    Oil Quality Sensor, 1/2 inch BSP, RS485, 4-20 mA, CAN bus, Modbus
    P/N: OQS2-01-A-V

    $1,497.25 
       
  • CINRG customization of existing instrument.
    CINRG customization of existing instrument.

    CINRG customization of existing instrument.

    $2,200.00
    P/N: CS-HVA-1-03


       
    CINRG Customization
    P/N: CS-HVA-1-03

    $2,200.00 
       
  • Moisture Content Sensor, 1/2" BSP male, Viton Seal, RS-485 MODbus, Analog 4-20 mA
    Moisture Content Sensor, 1/2" BSP male, Viton Seal, RS-485 MODbus, Analog 4-20 mA

    Moisture Content Sensor, 1/2" BSP male, Viton Seal, RS-485 MODbus, Analog 4-20 mA

    $1,587.30
    P/N: MCS-01-0-B


       
    Moisture Content Sensor, 1/2 inch BSP male, Viton Seal, RS-485 MODbus, Analog 4-20 mA
    P/N: MCS-01-0-B

    $1,587.30 
       
  • Peek Valve Assembly
    Peek Valve Assembly

    Peek Valve Assembly

    $1,062.78
    P/N: CS-234-402

    CS-APC-2 Genuine Spare Parts

    SPECIFICATIONS
    Peek Valve Assembly
       
    CS-APC-2 Genuine Spare Parts
    P/N: CS-234-402

    $1,062.78 
       
  • LPA3 Portable Particle Counter
    LPA3 Portable Particle Counter

    LPA3 Portable Particle Counter

    $19,564.05
    P/N: LPA3-W-P-S-101

    The LPA3 was designed to replace the LPA2. The customer should find only improvements in terms of performance. MP Filtri fts next-generation LPA3 delivers a fast, accurate and comprehensive hydraulic health check in a robust yet portable package. Featuring the latest breakthroughs in optical and...

    SPECIFICATIONS
    Technology: LED based light extinction automatic optical particle counter Particle Sizing: >4, >6, >14, >21, >25, >38, >50, >70 µm(c) Analysis Range:ISO 4406:2017 Code 8 to 24 NAS 1638 Class 2 to 12 AS4059/ISO11218 Rev E, Table 1 Size Codes 2-12 AS4059/ISO11218 Rev E, Table 2 Size Codes, A:000 to 12,...
       
    A unique high accuracy, fully portable product. For users of hydraulic, lubrication and transmission systems. The LPA3 is a highly accurate, portable laser particle analyser that counts and sizes particles of solid contaminants in fluid
    P/N: LPA3-W-P-S-101

    $19,564.05 
       
  • No Moisture sensor, for phosphate ester and aggressive fluids, display, customizable relay, M16x2 co
    No Moisture sensor, for phosphate ester and aggressive fluids, display, customizable relay, M16x2 co

    No Moisture sensor, for phosphate ester and aggressive fluids, display, customizable relay, M16x2 co

    $4,895.67
    P/N: CMS0SKRG1-2


       
    No Moisture sensor, for offshore and selected water based fluids, display, customizable relay, M16x2 connection
    P/N: CMS0SKRG1-2

    $4,895.67 
       
  • No Moisture sensor, for offshore and selected water based fluids, display, customizable relay, M16x2
    No Moisture sensor, for offshore and selected water based fluids, display, customizable relay, M16x2

    No Moisture sensor, for offshore and selected water based fluids, display, customizable relay, M16x2

    $4,210.34
    P/N: CMS0NKRG1-2


       
    No Moisture sensor, for offshore and selected water based fluids, display, customizable relay, M16x2 connection
    P/N: CMS0NKRG1-2

    $4,210.34 
       
  • CMS remote display unit with keypad
    CMS remote display unit with keypad

    CMS remote display unit with keypad

    $1,809.99
    P/N: CMS-RDU2


       
    CMS remote display unit with keypad
    P/N: CMS-RDU2

    $1,809.99 
       
  • Moisture sensor, for mineral fluid, no display, customizable relay, M16x2 connection
    Moisture sensor, for mineral fluid, no display, customizable relay, M16x2 connection

    Moisture sensor, for mineral fluid, no display, customizable relay, M16x2 connection

    $3,659.08
    P/N: CMSWM0RG1-2


       
    Moisture sensor, for mineral fluid, no display, customizable relay, M16x2 connection
    P/N: CMSWM0RG1-2

    $3,659.08 
       
  • No Moisture sensor, for mineral fluid, display, customizable relay, M16x2 connection
    No Moisture sensor, for mineral fluid, display, customizable relay, M16x2 connection

    No Moisture sensor, for mineral fluid, display, customizable relay, M16x2 connection

    $3,741.61
    P/N: CMS0MKRG1-2


       
    No Moisture sensor, for mineral fluid, display, customizable relay, M16x2 connection
    P/N: CMS0MKRG1-2

    $3,741.61 
       
  • No Moisture sensor, for mineral fluid, no display, customizable relay, M16x2 connection
    No Moisture sensor, for mineral fluid, no display, customizable relay, M16x2 connection

    No Moisture sensor, for mineral fluid, no display, customizable relay, M16x2 connection

    $3,165.32
    P/N: CMS0M0RG1-2


       
    No Moisture sensor, for mineral fluid, no display, customizable relay, M16x2 connection
    P/N: CMS0M0RG1-2

    $3,165.32 
       
  • Moisture sensor, for mineral fluid, display, customizable relay, M16x2 connection
    Moisture sensor, for mineral fluid, display, customizable relay, M16x2 connection

    Moisture sensor, for mineral fluid, display, customizable relay, M16x2 connection

    $4,233.93
    P/N: CMSWMKRG1-2


       
    Moisture sensor, for mineral fluid, display, customizable relay, M16x2 connection
    P/N: CMSWMKRG1-2

    $4,233.93 
       
  • M Series M16x2 Probe Adapter with Barb for 1/4" OD Disposable Tubing
    M Series M16x2 Probe Adapter with Barb for 1/4" OD Disposable Tubing

    M Series M16x2 Probe Adapter with Barb for 1/4" OD Disposable Tubing

    $40.93
    P/N: SMF4


       
  • ICM In-line Contamination Monitor
    ICM In-line Contamination Monitor

    ICM In-line Contamination Monitor

    $3,230.21
    P/N: ICM-W-M-K-R-G4

    The ICM automatically measures and displays particulate contamination, moisture and temperature levels in various hydraulic fluids. It is designed specifically to be mounted directly to systems, where ongoing measurement or analysis is required, and where space and costs are limited.

    SPECIFICATIONS
    Product - ICM, Moisture Sensor (RH%) - with moisture and temperature sensor, Fluid Compatibility - Mineral Oil, Keypad/Display - included, Device Output - with relays/external alarm outputs, Connection - 7/16 inch UNF - Female Port,
       
    A unique high accuracy, fully portable product.
    P/N: ICM-W-M-K-R-G4

    $3,230.21 
       
  • Motor Control Board, Dual (SMCB2)
    Motor Control Board, Dual (SMCB2)

    Motor Control Board, Dual (SMCB2)

    $659.02
    P/N: CS-MCB2

    CS-APC-2 Genuine Spare Parts

    SPECIFICATIONS
    Motor control board for CINRG CS-APC-2 syringe pump.
       
    CS-APC-2 Genuine Spare Parts
    P/N: CS-MCB2

    $659.02 
       
  • VITON TUBING  1/4" OD 1/8" ID  (1 foot)
    VITON TUBING  1/4" OD 1/8" ID  (1 foot)

    VITON TUBING  1/4" OD 1/8" ID (1 foot)

    $10.92
    P/N: CS-T1418-1

    CS-APC-2 Genuine Spare Parts

    SPECIFICATIONS
    Sample Needle for CS-HVA-1
       
    CS-APC-2 Genuine Spare Parts
    P/N: CS-T1418-1

    $10.92 
       
  • FLANGED NUT/WASHER 1/8" (10 PIECES)
    FLANGED NUT/WASHER 1/8" (10 PIECES)

    FLANGED NUT/WASHER 1/8" (10 PIECES)

    $48.78
    P/N: CS-W18-10

    CS-APC-2 Genuine Spare Parts

    SPECIFICATIONS
    Sample Needle for CS-HVA-1
       
    CS-APC-2 Genuine Spare Parts
    P/N: CS-W18-10

    $48.78 
       
  • 25ml SYRINGE
    25ml SYRINGE

    25ml SYRINGE

    $936.46
    P/N: CS-S25

    CS-APC-2 Genuine Spare Parts

    SPECIFICATIONS
    Sample Needle for CS-HVA-1
       
    CS-APC-2 Genuine Spare Parts
    P/N: CS-S25

    $936.46 
       
  • 24V DC Motor and Gearbox Combination
    24V DC Motor and Gearbox Combination

    24V DC Motor and Gearbox Combination

    $384.31
    P/N: CS-M24GB

    CS-APC-2 Genuine Spare Parts

    SPECIFICATIONS
    Sample Needle for CS-HVA-1
       
    CS-APC-2 Genuine Spare Parts
    P/N: CS-M24GB

    $384.31 
       
  • Sample Needle for CS-HVA-1
    Sample Needle for CS-HVA-1

    Sample Needle for CS-HVA-1

    $300.00
    P/N: CS-HVA-SN-01

    Sample uptake needle for CINRG Houillon Viscometer Automation system

    SPECIFICATIONS
    Sample Needle for CS-HVA-1
       
    Sample uptake needle for CINRG Houillon Viscometer Automation system
    P/N: CS-HVA-SN-01

    $300.00 
       
  • LP Pushbutton Valve, 9/16" - 18 ORB, Viton, w/ Locknut, Steel
    LP Pushbutton Valve, 9/16" - 18 ORB, Viton, w/ Locknut, Steel

    LP Pushbutton Valve, 9/16" - 18 ORB, Viton, w/ Locknut, Steel

    $51.72
    P/N: LPL6U

    The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

       
    The KP Series Sampling valve allows for sample taking at the inchpush of a button inch.
    P/N: LPL6U

    $51.72 
       
  • High Flow L Valve, 1/4" -18 NPTF, Swivel w/ 18" SS Tube
    High Flow L Valve, 1/4" -18 NPTF, Swivel w/ 18" SS Tube

    High Flow L Valve, 1/4" -18 NPTF, Swivel w/ 18" SS Tube

    $92.01
    P/N: L14NTRS18

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NTRS18

    $92.01 
       
  • 24" Steel, 1/4" NPT, swivel (stainless tube)
    24" Steel, 1/4" NPT, swivel (stainless tube)

    24" Steel, 1/4" NPT, swivel (stainless tube)

    $109.98
    P/N: B14NTRS24

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 24 inch, Adapter: Swivel 1/4 inch Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range:...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: B14NTRS24

    $109.98 
       
  • Tritan Condition Monitoring Pod replacement sight glass 3/4" pods
    Tritan Condition Monitoring Pod replacement sight glass 3/4" pods

    Tritan Condition Monitoring Pod replacement sight glass 3/4" pods

    $79.29
    P/N: SG075F2PK

    Multipurpose The CMP is a multi-parameter inspection pod that greatly modernizes and expands daily one-minute inspections. Best applications include gearboxes, sumps, reservoirs and low pressure systems where high levels of reliability are critical. Revolutionary The CMP extends the capabilities of the...

    SPECIFICATIONS
    2.75 inch x 3.18 inch x 3.5 inch (w x h x l), Large acrylic sight glass with 1.4 inch diameter x 1.25 inch deep viewing area, Replacement sight glass only for 3/4 inch pods
       
    The new Condition Monitoring Pod (CMP) from Luneta is a powerful machine inspection tool that provides quick access to a variety of field lubricant tests and gives instant feedback on the condition of the lubricant and its environment.
    P/N: SG075F2PK

    $79.29 
       
  • Tritan Condition Monitoring Pod replacement sight glass 1/2" pods
    Tritan Condition Monitoring Pod replacement sight glass 1/2" pods

    Tritan Condition Monitoring Pod replacement sight glass 1/2" pods

    $79.29
    P/N: SG050F2PK

    Multipurpose The CMP is a multi-parameter inspection pod that greatly modernizes and expands daily one-minute inspections. Best applications include gearboxes, sumps, reservoirs and low pressure systems where high levels of reliability are critical. Revolutionary The CMP extends the capabilities of the...

    SPECIFICATIONS
    2.75 inch x 3.18 inch x 3.5 inch (w x h x l), Large acrylic sight glass with 1.4 inch diameter x 1.25 inch deep viewing area, Replacement sight glass only for 1/2 inch pods
       
    The new Condition Monitoring Pod (CMP) from Luneta is a powerful machine inspection tool that provides quick access to a variety of field lubricant tests and gives instant feedback on the condition of the lubricant and its environment.
    P/N: SG050F2PK

    $79.29 
       
  • Ultrasonic Level Sensor
    Ultrasonic Level Sensor

    Ultrasonic Level Sensor

    $662.79
    P/N: CS-ULS-B


       
    Ultrasonic sensor with RS-232 output (includes collimator nozzle and built in 2 meter cable).
    P/N: CS-ULS-B

    $662.79 
       
  • Preventive Maintenance & Calibration
    Preventive Maintenance & Calibration

    Preventive Maintenance & Calibration

    $1,850.00
    P/N: CS-APC-2-MC


       
    On-site maintenance and calibration for your CINRG CS-APC-2, CS-APC-3 or CS-APC-22M automated particle counting instrument
    P/N: CS-APC-2-MC

    $1,850.00 
       
  • 24" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid
    24" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

    24" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

    $86.22
    P/N: L14NTR24

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: Stainless Steel 24 inch, Adapter: Fixed 1/4 inch Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NTR24

    $86.22 
       
  • KP series push button sampling valve, 1/4" NPT - 18 NPTF Neoprene
    KP series push button sampling valve, 1/4" NPT - 18 NPTF Neoprene

    KP series push button sampling valve, 1/4" NPT - 18 NPTF Neoprene

    $56.27
    P/N: KPQ14NP

    The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

    SPECIFICATIONS
    Body Component: Carbon Steel, Button/Spout/Cap: Brass, Seals: Viton, Spring: Carbon Steel, Thread Size: 1/4 inch NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
       
    The KP Series Sampling valve allows for sample taking at the inchpush of a button inch.
    P/N: KPQ14NP

    $56.27 
       
  • 12" Steel, high flow, 1/4" NPT Thread, Rigid, 5/16 OD SS Tube
    12" Steel, high flow, 1/4" NPT Thread, Rigid, 5/16 OD SS Tube

    12" Steel, high flow, 1/4" NPT Thread, Rigid, 5/16 OD SS Tube

    $81.67
    P/N: L14N5TR12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 30cm (12 inch), Adapter: Fixed 1/4 inch Male NPT, OD: 5/16 inch, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14N5TR12

    $81.67 
       
  • Vacuum Sample Pump (Vacuum Release Valve w/stand)
    Vacuum Sample Pump (Vacuum Release Valve w/stand)

    Vacuum Sample Pump (Vacuum Release Valve w/stand)

    $125.22
    P/N: SP38-97FM


    SPECIFICATIONS
    38 mm, Folding Stand
       
    These pumps will generate in excess of 27 inches of Hg, suitable for sampling of viscous fluids (i.e. oils).
    P/N: SP38-97FM

    $125.22 
       
  • 30 ml Sample cups
    30 ml Sample cups

    30 ml Sample cups

    $94.53
    P/N: APCSC5000


    SPECIFICATIONS
    Case: 5000 cups/case, Packaged: 50 sleeves of 100 cups, Cube Dimension: 1.20, Cases per Skid: 50
       
    1 oz Graduated Medicine cup (packed in a case of 5000 cups).
    P/N: APCSC5000

    $94.53 
       
  • Tritan Condition Monitoring Pod replacement sight glass 1, 1-1/4 and 1-1/2" pods
    Tritan Condition Monitoring Pod replacement sight glass 1, 1-1/4 and 1-1/2" pods

    Tritan Condition Monitoring Pod replacement sight glass 1, 1-1/4 and 1-1/2" pods

    $74.80
    P/N: SG10F2PK

    Multipurpose The CMP is a multi-parameter inspection pod that greatly modernizes and expands daily one-minute inspections. Best applications include gearboxes, sumps, reservoirs and low pressure systems where high levels of reliability are critical. Revolutionary The CMP extends the capabilities of the...

    SPECIFICATIONS
    2.75 inch x 3.18 inch x 3.5 inch (w x h x l), Large acrylic sight glass with 1.4 inch diameter x 1.25 inch deep viewing area, Replacement sight glass only for 1 inch, 1-1/4 inch and 1-1/2 inch pods
       
    The new Condition Monitoring Pod (CMP) from Luneta is a powerful machine inspection tool that provides quick access to a variety of field lubricant tests and gives instant feedback on the condition of the lubricant and its environment.
    P/N: SG10F2PK

    $74.80 
       
  • Sample Tray for CS-APC-2
    Sample Tray for CS-APC-2

    Sample Tray for CS-APC-2

    $862.37
    P/N: CS-APC-ST-01


    SPECIFICATIONS
    Sample Positions: 104 (8 x 13)
       
    Standard 104 position (8 x 13) sample tray for CINRG CS-APC-2 instrument.
    P/N: CS-APC-ST-01

    $862.37 
       
  • 24" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Swivel
    24" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Swivel

    24" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Swivel

    $97.60
    P/N: L14NTRS24

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: Stainless Steel (24 inch), Adapter: Swivel 1/4 inch Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NTRS24

    $97.60 
       
  • 12" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid
    12" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

    12" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

    $75.03
    P/N: L14NTR12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 45cm Stainless Steel (12 inch), Adapter: Fixed 1/4 inch Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NTR12

    $75.03 
       
  • 24" Stainless Steel, high flow, 1/4" NPT, swivel
    24" Stainless Steel, high flow, 1/4" NPT, swivel

    24" Stainless Steel, high flow, 1/4" NPT, swivel

    $251.67
    P/N: L14NRTRS24

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 61cm (24 inch), Adapter: Swivel 1/4 inch Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless-steel, Sample Test Port: stainless-steel, Seals Standard: Viton (FPM) - EPDM, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NRTRS24

    $251.67 
       
  • Particle Count Sensor
    Particle Count Sensor

    Particle Count Sensor

    $5,758.50
    P/N: CS-LDS-4550

    A laser particle counting sensor for particle measurement in a size range of 1-200µm that works using the light blockage principle.

    SPECIFICATIONS
    Cable Length: 80 cm, Usage: Sensor for particles in liquids, also for high viscous media, Measuring Range: Water 1µm - 160µm, oil 1,5µm - 100µm after ISO (91), Flow Rate: Typically 50 ml/min (max. 100 ml/min), Max. Concentration: 25 000 particles/ml, No. of Channels: 4,096, Connecting plug...
       
    Multi-channel laser particle counting sensor for CINRG CS-APC-2 instrument.
    P/N: CS-LDS-4550

    $5,758.50 
       
  • KST series probe, 1/4" NPTF, viton, SS externals
    KST series probe, 1/4" NPTF, viton, SS externals

    KST series probe, 1/4" NPTF, viton, SS externals

    $78.85
    P/N: KST14NVR-C

    The KST Sample valves are suitable for mobile and marine applications, and their unique design makes them suitable for use with the probalizer-style vacuum sampling pump for taking rapid and accurate oil analysis samples.

    SPECIFICATIONS
    Thread Size: 1/4 inch NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F), Seals: Viton, External: Stainless Steel
       
    The KST Series Sampling valve works hand-in-hand with the probalizer-style vacuum sample pump.
    P/N: KST14NVR-C

    $78.85 
       
  • 18" Stainless Steel, high flow, 1/4" NPT, swivel
    18" Stainless Steel, high flow, 1/4" NPT, swivel

    18" Stainless Steel, high flow, 1/4" NPT, swivel

    $246.07
    P/N: L14NRTRS18

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 45cm (18 inch), Adapter: Swivel 1/4 inch Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless-steel, Sample Test Port: stainless-steel, Seals Standard: Viton (FPM) - EPDM, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NRTRS18

    $246.07 
       
  • Push Button Spout Barb
    Push Button Spout Barb

    Push Button Spout Barb

    $6.09
    P/N: KP4PT


       
    Push button spout barb for use with push button sampling valve.
    P/N: KP4PT

    $6.09 
       
  • KST High Pressure Probe Assembly
    KST High Pressure Probe Assembly

    KST High Pressure Probe Assembly

    $63.18
    P/N: VHKF


    SPECIFICATIONS
    Sample Pressure Range: 750 - 3500 PSI (5.1 to 24.3 mPa), Use With: KST Series Ports, NOTE: SAMPLE BOTTLE NOT INCLUDED
       
    High pressure sampling probe connects to KST series valves.
    P/N: VHKF

    $63.18 
       
  • KP series push button sampling valve (Viton/Stainless), 1/4" NPT
    KP series push button sampling valve (Viton/Stainless), 1/4" NPT

    KP series push button sampling valve (Viton/Stainless), 1/4" NPT

    $129.99
    P/N: KP14NV-R

    The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

    SPECIFICATIONS
    Body Component: Stainless Steel, Button/Spout/Cap: Stainless, Seals: Viton, Spring: Stainless, Thread Size: 1/4 inch NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
       
    The KP Series Sampling valve allows for sample taking at the inchpush of a button inch.
    P/N: KP14NV-R

    $129.99 
       
  • LP Pushbutton Valve, ¼" - 18 NPTF, w/o Lock Nut, Viton, 316 SS
    LP Pushbutton Valve, ¼" - 18 NPTF, w/o Lock Nut, Viton, 316 SS

    LP Pushbutton Valve, ¼" - 18 NPTF, w/o Lock Nut, Viton, 316 SS

    $133.67
    P/N: LPL4N-R

    The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

       
    The KP Series Sampling valve allows for sample taking at the inchpush of a button inch.
    P/N: LPL4N-R

    $133.67 
       
  • KP series push button sampling valve (Viton/Stainless Externals), 1/8" NPT
    KP series push button sampling valve (Viton/Stainless Externals), 1/8" NPT

    KP series push button sampling valve (Viton/Stainless Externals), 1/8" NPT

    $111.75
    P/N: KP18NVR

    The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

    SPECIFICATIONS
    Pushbutton Valve, 1/8 inch - 27 NPTF, Viton, Stainless Externals
       
    Pushbutton Valve, 1/8 inch - 27 NPTF, Viton, Stainless Externals
    P/N: KP18NVR

    $111.75 
       
  • KP series push button sampling valve (Viton/Stainless), 1/8" NPT
    KP series push button sampling valve (Viton/Stainless), 1/8" NPT

    KP series push button sampling valve (Viton/Stainless), 1/8" NPT

    $129.98
    P/N: KP18NV-R

    The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

    SPECIFICATIONS
    Body Component: Stainless Steel, Button/Spout/Cap: Stainless, Seals: Viton, Spring: Stainless, Thread Size: 1/8 inch NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
       
    Pushbutton Valve, 1/8 inch - 27 NPTF, Viton, All Stainless
    P/N: KP18NV-R

    $129.98 
       
  • KST series probe, 1/4" NPTF, viton
    KST series probe, 1/4" NPTF, viton

    KST series probe, 1/4" NPTF, viton

    $27.71
    P/N: KST14N-VC

    The KST Sample valves are suitable for mobile and marine applications, and their unique design makes them suitable for use with the probalizer-style vacuum sampling pump for taking rapid and accurate oil analysis samples.

    SPECIFICATIONS
    Thread Size: 1/4 inch NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F), Seals: Viton
       
    The KST Series Sampling valve works hand-in-hand with the probalizer-style vacuum sample pump.
    P/N: KST14N-VC

    $27.71 
       
  • 12" Stainless Steel, high flow, 1/4" NPT, swivel
    12" Stainless Steel, high flow, 1/4" NPT, swivel

    12" Stainless Steel, high flow, 1/4" NPT, swivel

    $240.48
    P/N: L14NRTRS12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 30cm (12 inch), Adapter: 1/4 inch Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless-steel, Sample Test Port: stainless-steel, Seals Standard: Viton (FPM) - EPDM, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NRTRS12

    $240.48 
       
  • 12" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Swivel
    12" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Swivel

    12" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Swivel

    $86.42
    P/N: L14NTRS12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: Stainless Steel (12 inch), Adapter: Swivel 1/4 inch Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NTRS12

    $86.42 
       
  • Vacuum Sample Pump
    Vacuum Sample Pump

    Vacuum Sample Pump

    $52.32
    P/N: SP43XV


       
    These pumps will generate in excess of 27 inches of Hg, suitable for sampling of viscous fluids (i.e. oils).
    P/N: SP43XV

    $52.32 
       
  • 18" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid
    18" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

    18" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

    $80.62
    P/N: L14NTR18

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 45cm Stainless Steel (18 inch), Adapter: Fixed 1/4 inch Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NTR18

    $80.62 
       
  • Vacuum Sample Pump (Vacuum Release Valve)
    Vacuum Sample Pump (Vacuum Release Valve)

    Vacuum Sample Pump (Vacuum Release Valve)

    $65.58
    P/N: SP38-XV


       
    These pumps will generate in excess of 27 inches of Hg, suitable for sampling of viscous fluids (i.e. oils).
    P/N: SP38-XV

    $65.58 
       
  • Tin Sample Bottle
    Tin Sample Bottle

    Tin Sample Bottle

    $7.57
    P/N: LGBT500


       
    500 ml tin can. Ideal for sampling heat transfer fluids.
    P/N: LGBT500

    $7.57 
       
  • 12" Steel, 1/4" NPT, rigid, stainless steel
    12" Steel, 1/4" NPT, rigid, stainless steel

    12" Steel, 1/4" NPT, rigid, stainless steel

    $217.18
    P/N: B14NRTR12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 30cm (12 inch), Adapter: Fixed 1/4 inch Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: stainless steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request,...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: B14NRTR12

    $217.18 
       
  • 1/4"B Thread Together Probe w/1/4"Tubing
    1/4"B Thread Together Probe w/1/4"Tubing

    1/4"B Thread Together Probe w/1/4"Tubing

    $20.93
    P/N: SBF4


       
  • 14" Steel, 1/4" NPT, rigid (stainless tube)
    14" Steel, 1/4" NPT, rigid (stainless tube)

    14" Steel, 1/4" NPT, rigid (stainless tube)

    $92.20
    P/N: B14NTR24

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 30cm (24 inch), Adapter: Fixed 1/4 inch Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: B14NTR24

    $92.20 
       
  • 12" Steel, 1/4" NPT, swivel (stainless tube)
    12" Steel, 1/4" NPT, swivel (stainless tube)

    12" Steel, 1/4" NPT, swivel (stainless tube)

    $98.78
    P/N: B14NTRS12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 30cm (12 inch), Adapter: Swivel 1/4 inch Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: B14NTRS12

    $98.78 
       
  • Pressureless Valve Mount 1-1/4" (for Pipe)
    Pressureless Valve Mount 1-1/4" (for Pipe)

    Pressureless Valve Mount 1-1/4" (for Pipe)

    $685.91
    P/N: VM2-P114

    Valve Mounts are an ingenious way of getting around the conundrum of sampling from the system return line. On pressurized systems with a reservoir the recommendation is to sample from the return line. The irony is that the return line is, in almost all instances, devoid of any ports, or an easy place to...

    SPECIFICATIONS
    Pipe Opening: 1-1/4 inch, Height: 4.72 inch (120 mm), Width: 2.56 inch (65 mm), Housing: Steel, Sealing Shell: Steel, Seal: Viton, Measuring Needle: Steel, Maximum Operating Pressure: 9000 PSI, Maximum Sampling Pressure: 6000 PSI, Pipe Requirements Seamless drawn steel pipes made out of ST...
       
    Valve Mounts allow for the easy installation of a sampling port on existing return lines.
    P/N: VM2-P114

    $685.91 
       
  • Gauge Plug - 1/4" NPT (Stainless Steel)
    Gauge Plug - 1/4" NPT (Stainless Steel)

    Gauge Plug - 1/4" NPT (Stainless Steel)

    $120.64
    P/N: B14N-R


    SPECIFICATIONS
    max pressure: 9000 PSI, material: stainless steel, o-rings: nitrile, thread size: 1/4 inch NPT
       
    These high quality, leak-proof gauge plugs are suitable for installation on any pressurized lubricant point.
    P/N: B14N-R

    $120.64 
       
  • 24" Stainless Steel, high flow, 1/4" NPT, rigid
    24" Stainless Steel, high flow, 1/4" NPT, rigid

    24" Stainless Steel, high flow, 1/4" NPT, rigid

    $218.50
    P/N: L14NRTR24

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 60cm (24 inch), Adapter: Fixed 1/4 inch Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless-steel, Sample Test Port: stainless-steel, Seals Standard: Viton (FPM) - EPDM, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NRTR24

    $218.50 
       
  • 18" Stainless Steel, high flow, 1/4" NPT, rigid
    18" Stainless Steel, high flow, 1/4" NPT, rigid

    18" Stainless Steel, high flow, 1/4" NPT, rigid

    $212.91
    P/N: L14NRTR18

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 45cm (18 inch), Adapter: Fixed 1/4 inch Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless-steel, Sample Test Port: stainless-steel, Seals Standard: Viton (FPM) - EPDM, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NRTR18

    $212.91 
       
  • 12" Steel, 1/4" NPT, rigid (stainless tube)
    12" Steel, 1/4" NPT, rigid (stainless tube)

    12" Steel, 1/4" NPT, rigid (stainless tube)

    $81.02
    P/N: B14NTR12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 30cm (12 inch), Adapter: Fixed 1/4 inch Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: B14NTR12

    $81.02 
       
  • 12" Stainless Steel, high flow, 1/4" NPT, rigid
    12" Stainless Steel, high flow, 1/4" NPT, rigid

    12" Stainless Steel, high flow, 1/4" NPT, rigid

    $207.32
    P/N: L14NRTR12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 30cm (12 inch), Adapter: Fixed 1/4 inch Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless-steel, Sample Test Port: stainless-steel, Seals Standard: Viton (FPM) - EPDM, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NRTR12

    $207.32 
       
  • Oil Sample Service Kit
    Oil Sample Service Kit

    Oil Sample Service Kit

    $117.70
    P/N: OA-SRVC-K1

    The Lubrigard Oil Sampling Service Kit is the complete solution for your portable oil sampling needs. Simply add your oil analysis samples kits to this durable travel case and you have everything you need to take oil samples in the field.

       
    The oil sampling service kit comes complete with a sampling pump, pump case, 24 feet of tubing, and a tubing cutter all in a portable and durable industrial plastic case.
    P/N: OA-SRVC-K1

    $117.70 
       
  • Hi-pressure crimped hose with vent cap
    Hi-pressure crimped hose with vent cap

    Hi-pressure crimped hose with vent cap

    $63.05
    P/N: VHBF


    SPECIFICATIONS
    B Series M16x2 High Pressure Probe Assembly, 250 psi to 3,500 psi
       
    For use with all standard Pitot tubes
    P/N: VHBF

    $63.05 
       
  • Disposable probe tube cap
    Disposable probe tube cap

    Disposable probe tube cap

    $3.98
    P/N: SVP

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 30cm (12 inch),
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can
    P/N: SVP

    $3.98 
       
  • KST series probe
    KST series probe

    KST series probe

    $11.78
    P/N: KPB4


       
    Compact Brass button probe. KST Brass 90 deg button probe with barb for 1/4 inch OD (3/16 inch ID) PVC tubing
    P/N: KPB4

    $11.78 
       
  • Mini Tube Cutter (1/8" - 5/8")
    Mini Tube Cutter (1/8" - 5/8")

    Mini Tube Cutter (1/8" - 5/8")

    $60.04
    P/N: TC-1050


       
    Tube cutter for use with standard pitot tubes. Will cut 1/8 inch - 5/8 inch tubing.
    P/N: TC-1050

    $60.04 
       
  • KST series probe, 1/8" NPTF
    KST series probe, 1/8" NPTF

    KST series probe, 1/8" NPTF

    $27.71
    P/N: KST18N-C

    The KST Sample valves are suitable for mobile and marine applications, and their unique design makes them suitable for use with the probalizer-style vacuum sampling pump for taking rapid and accurate oil analysis samples.

    SPECIFICATIONS
    Thread Size: 1/8 inch NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
       
    The KST Series Sampling valve works hand-in-hand with the probalizer-style vacuum sample pump.
    P/N: KST18N-C

    $27.71 
       
  • KP series push button sampling valve, 1/8" NPT
    KP series push button sampling valve, 1/8" NPT

    KP series push button sampling valve, 1/8" NPT

    $47.30
    P/N: KP18N

    The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

    SPECIFICATIONS
    Body Component: Carbon Steel, Button/Spout/Cap: Brass, Seals: Viton, Spring: Carbon Steel, Thread Size: 1/8 inch NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
       
    The KP Series Sampling valve allows for sample taking at the inchpush of a button inch.
    P/N: KP18N

    $47.30 
       
  • Sample Tubing (1/4" O.D.)
    Sample Tubing (1/4" O.D.)

    Sample Tubing (1/4" O.D.)

    $0.50
    P/N: PT44

    This sample tubing can be used with all Lubrigard vacuum sample pumps, and with other sampling hardware that requires replaceable plastic tubing.

       
    1/4 inch OD (3/16 inch ID) hard LDPE tubing (SOLD PER FOOT)
    P/N: PT44

    $0.50 
       
  • Pressureless Valve Mount 1-1/2"
    Pressureless Valve Mount 1-1/2"

    Pressureless Valve Mount 1-1/2"

    $669.66
    P/N: VM2-112

    Valve Mounts are an ingenious way of getting around the conundrum of sampling from the system return line. On pressurized systems with a reservoir the recommendation is to sample from the return line. The irony is that the return line is, in almost all instances, devoid of any ports, or an easy place to...

    SPECIFICATIONS
    Pipe Opening: 1-1/2 inch, Height: 4.84 inch (123 mm), Width: 2.56 inch (65 mm), Housing: Steel, Sealing Shell: Steel, Seal: Viton, Measuring Needle: Steel, Maximum Operating Pressure: 9000 PSI, Maximum Sampling Pressure: 6000 PSI, Pipe Requirements Seamless drawn steel pipes made out of ST...
       
    Valve Mounts allow for the easy installation of a sampling port on existing return lines.
    P/N: VM2-112

    $669.66 
       
  • Pressureless Valve Mount 1-1/4""
    Pressureless Valve Mount 1-1/4""

    Pressureless Valve Mount 1-1/4""

    $669.66
    P/N: VM2-114

    Valve Mounts are an ingenious way of getting around the conundrum of sampling from the system return line. On pressurized systems with a reservoir the recommendation is to sample from the return line. The irony is that the return line is, in almost all instances, devoid of any ports, or an easy place to...

    SPECIFICATIONS
    Pipe Opening: 1-1/4 inch, Height: 4.72 inch (120 mm), Width: 2.56 inch (65 mm), Housing: Steel, Sealing Shell: Steel, Seal: Viton, Measuring Needle: Steel, Maximum Operating Pressure: 9000 PSI, Maximum Sampling Pressure: 6000 PSI,
       
    Valve Mounts allow for the easy installation of a sampling port on existing return lines.
    P/N: VM2-114

    $669.66 
       
  • Pressureless Valve Mount 1"
    Pressureless Valve Mount 1"

    Pressureless Valve Mount 1"

    $651.71
    P/N: VM2-1

    Valve Mounts are an ingenious way of getting around the conundrum of sampling from the system return line. On pressurized systems with a reservoir the recommendation is to sample from the return line. The irony is that the return line is, in almost all instances, devoid of any ports, or an easy place to...

    SPECIFICATIONS
    Pipe Opening: 1 inch, Height: 4.21 inch (107 mm), Width: 1.97 inch (50 mm), Housing: Steel, Sealing Shell: Steel, Seal: Viton, Measuring Needle: Steel, Maximum Operating Pressure: 9000 PSI, Maximum Sampling Pressure: 6000 PSI, Pipe Requirements Seamless drawn steel pipes made out of ST 35.4...
       
    Valve Mounts allow for the easy installation of a sampling port on existing return lines.
    P/N: VM2-1

    $651.71 
       
  • Pressureless Valve Mount 3/4"
    Pressureless Valve Mount 3/4"

    Pressureless Valve Mount 3/4"

    $652.28
    P/N: VM2-34

    Valve Mounts are an ingenious way of getting around the conundrum of sampling from the system return line. On pressurized systems with a reservoir the recommendation is to sample from the return line. The irony is that the return line is, in almost all instances, devoid of any ports, or an easy place to...

    SPECIFICATIONS
    Pipe Opening: 3/4 inch, Height: 4.08 inch (104 mm), Width: 1.97 inch (50 mm), Housing: Steel, Sealing Shell: Steel, Seal: Viton, Measuring Needle: Steel, Maximum Operating Pressure: 9000 PSI, Maximum Sampling Pressure: 6000 PSI, Pipe Requirements Seamless drawn steel pipes made out of ST...
       
    Valve Mounts allow for the easy installation of a sampling port on existing return lines.
    P/N: VM2-34

    $652.28 
       
  • Pressureless Valve Mount 1/2"
    Pressureless Valve Mount 1/2"

    Pressureless Valve Mount 1/2"

    $652.28
    P/N: VM2-12

    Valve Mounts are an ingenious way of getting around the conundrum of sampling from the system return line. On pressurized systems with a reservoir the recommendation is to sample from the return line. The irony is that the return line is, in almost all instances, devoid of any ports, or an easy place to...

    SPECIFICATIONS
    Pipe Opening: 1/2 inch, Height: 3.74 inch (95 mm), Width: 1.58 inch (40 mm), Housing: Steel, Sealing Shell: Steel, Seal: Viton, Measuring Needle: Steel, Maximum Operating Pressure: 9000 PSI, Maximum Sampling Pressure: 6000 PSI, Pipe Requirements Seamless drawn steel pipes made out of ST...
       
    Valve Mounts allow for the easy installation of a sampling port on existing return lines.
    P/N: VM2-12

    $652.28 
       
  • Pressureless Valve Mount 3/8"
    Pressureless Valve Mount 3/8"

    Pressureless Valve Mount 3/8"

    $652.28
    P/N: VM2-38

    Valve Mounts are an ingenious way of getting around the conundrum of sampling from the system return line. On pressurized systems with a reservoir the recommendation is to sample from the return line. The irony is that the return line is, in almost all instances, devoid of any ports, or an easy place to...

    SPECIFICATIONS
    Pipe Opening: 3/8 inch, Height: 3.7 inch (94 mm), Width: 1.58 inch (40 mm), Housing: Steel, Sealing Shell: Steel, Seal: Viton, Measuring Needle: Steel, Maximum Operating Pressure: 9000 PSI, Maximum Sampling Pressure: 6000 PSI, Pipe Requirements Seamless drawn steel pipes made out of ST 35.4...
       
    Valve Mounts allow for the easy installation of a sampling port on existing return lines.
    P/N: VM2-38

    $652.28 
       
  • Pressurized Valve Mount 1-1/2"
    Pressurized Valve Mount 1-1/2"

    Pressurized Valve Mount 1-1/2"

    $779.92
    P/N: VM1-112

    Valve Mounts are an ingenious way of getting around the conundrum of sampling from the system return line. On pressurized systems with a reservoir the recommendation is to sample from the return line. The irony is that the return line is, in almost all instances, devoid of any ports, or an easy place to...

    SPECIFICATIONS
    Pipe Opening: 1-1/2 inch, Height: 6.18 inch (157 mm), Width: 2.56 inch (65 mm), Housing: Steel, Sealing Shell: Steel, Seal: Viton, Measuring Needle: Steel, Maximum Operating Pressure: 9000 PSI, Maximum Sampling Pressure: 6000 PSI,
       
    Valve Mounts allow for the easy installation of a sampling port on existing return lines.
    P/N: VM1-112

    $779.92 
       
  • Pressurized Valve Mount 1-1/4""
    Pressurized Valve Mount 1-1/4""

    Pressurized Valve Mount 1-1/4""

    $796.17
    P/N: VM1-114

    Valve Mounts are an ingenious way of getting around the conundrum of sampling from the system return line. On pressurized systems with a reservoir the recommendation is to sample from the return line. The irony is that the return line is, in almost all instances, devoid of any ports, or an easy place to...

    SPECIFICATIONS
    Pipe Opening: 1-1/4 inch, Height: 6.06 inch (154 mm), Width: 2.56 inch (65 mm), Housing: Steel, Sealing Shell: Steel, Seal: Viton, Measuring Needle: Steel, Maximum Operating Pressure: 9000 PSI, Maximum Sampling Pressure: 6000 PSI, Pipe Requirements Seamless drawn steel pipes made out of ST...
       
    Valve Mounts allow for the easy installation of a sampling port on existing return lines.
    P/N: VM1-114

    $796.17 
       
  • Pressurized Valve Mount 1"
    Pressurized Valve Mount 1"

    Pressurized Valve Mount 1"

    $783.33
    P/N: VM1-1

    Valve Mounts are an ingenious way of getting around the conundrum of sampling from the system return line. On pressurized systems with a reservoir the recommendation is to sample from the return line. The irony is that the return line is, in almost all instances, devoid of any ports, or an easy place to...

    SPECIFICATIONS
    Pipe Opening: 1 inch, Height: 5.55 inch (141 mm), Width: 1.97 inch (50 mm), Housing: Steel, Sealing Shell: Steel, Seal: Viton, Measuring Needle: Steel, Maximum Operating Pressure: 9000 PSI, Maximum Sampling Pressure: 6000 PSI, Pipe Requirements Seamless drawn steel pipes made out of ST 35.4...
       
    Valve Mounts allow for the easy installation of a sampling port on existing return lines.
    P/N: VM1-1

    $783.33 
       
  • Pressurized Valve Mount 3/4"
    Pressurized Valve Mount 3/4"

    Pressurized Valve Mount 3/4"

    $728.41
    P/N: VM1-34

    Valve Mounts are an ingenious way of getting around the conundrum of sampling from the system return line. On pressurized systems with a reservoir the recommendation is to sample from the return line. The irony is that the return line is, in almost all instances, devoid of any ports, or an easy place to...

    SPECIFICATIONS
    Pipe Opening: 3/4 inch, Height: 5.41 inch (138 mm), Width: 1.97 inch (50 mm), Housing: Steel, Sealing Shell: Steel, Seal: Viton, Measuring Needle: Steel, Maximum Operating Pressure: 9000 PSI, Maximum Sampling Pressure: 6000 PSI, Pipe Requirements Seamless drawn steel pipes made out of ST...
       
    Valve Mounts allow for the easy installation of a sampling port on existing return lines.
    P/N: VM1-34

    $728.41 
       
  • Pressurized Valve Mount 1/2"
    Pressurized Valve Mount 1/2"

    Pressurized Valve Mount 1/2"

    $728.41
    P/N: VM1-12

    Valve Mounts are an ingenious way of getting around the conundrum of sampling from the system return line. On pressurized systems with a reservoir the recommendation is to sample from the return line. The irony is that the return line is, in almost all instances, devoid of any ports, or an easy place to...

    SPECIFICATIONS
    Pipe Opening: 1/2 inch, Height: 5.08 inch (129 mm), Width: 1.58 inch (40 mm), Housing: Steel, Sealing Shell: Steel, Seal: Viton, Measuring Needle: Steel, Maximum Operating Pressure: 9000 PSI, Maximum Sampling Pressure: 6000 PSI, Pipe Requirements Seamless drawn steel pipes made out of ST...
       
    Valve Mounts allow for the easy installation of a sampling port on existing return lines.
    P/N: VM1-12

    $728.41 
       
  • Pressurized Valve Mount 3/8"
    Pressurized Valve Mount 3/8"

    Pressurized Valve Mount 3/8"

    $728.41
    P/N: VM1-38

    Valve Mounts are an ingenious way of getting around the conundrum of sampling from the system return line. On pressurized systems with a reservoir the recommendation is to sample from the return line. The irony is that the return line is, in almost all instances, devoid of any ports, or an easy place to...

    SPECIFICATIONS
    Pipe Opening: 3/8 inch, Height: 5.04 inch (128 mm), Width: 1.58 inch (40 mm), Housing: Steel, Sealing Shell: Steel, Seal: Viton, Measuring Needle: Steel, Maximum Operating Pressure: 9000 PSI, Maximum Sampling Pressure: 6000 PSI, Pipe Requirements Seamless drawn steel pipes made out of ST...
       
    Valve Mounts allow for the easy installation of a sampling port on existing return lines.
    P/N: VM1-38

    $728.41 
       
  • KP series push button sampling valve, 1/4" NPT
    KP series push button sampling valve, 1/4" NPT

    KP series push button sampling valve, 1/4" NPT

    $39.62
    P/N: KP14N

    The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

    SPECIFICATIONS
    Body Component: Carbon Steel, Button/Spout/Cap: Brass, Seals: Viton, Spring: Carbon Steel, Thread Size: 1/4 inch NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
       
    The KP Series Sampling valve allows for sample taking at the inchpush of a button inch.
    P/N: KP14N

    $39.62 
       
  • KST series probe, 1/4" NPTF
    KST series probe, 1/4" NPTF

    KST series probe, 1/4" NPTF

    $27.71
    P/N: KST14N-C

    The KST Sample valves are suitable for mobile and marine applications, and their unique design makes them suitable for use with the probalizer-style vacuum sampling pump for taking rapid and accurate oil analysis samples.

    SPECIFICATIONS
    Thread Size: 1/4 inch NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
       
    The KST Series Sampling valve works hand-in-hand with the probalizer-style vacuum sample pump.
    P/N: KST14N-C

    $27.71 
       
  • Lo-Pressure sampling hose (Hi-Visc)
    Lo-Pressure sampling hose (Hi-Visc)

    Lo-Pressure sampling hose (Hi-Visc)

    $42.12
    P/N: SLF4


       
    P/N: SLF4

    $42.12 
       
  • Sample Bottle
    Sample Bottle

    Sample Bottle

    $2.25
    P/N: CBP100


       
    This 100 ml high-density polymer sample bottle is clear and resists both high temperature and pressure and is suitable for oils, fuels and other liquids.
    P/N: CBP100

    $2.25 
       
  • Lo-pressure Sampling Hose
    Lo-pressure Sampling Hose

    Lo-pressure Sampling Hose

    $56.72
    P/N: SHLP01


       
    These hose assemblies are suitable for taking oil samples from low pressure systems equipped with standard gauge plugs.
    P/N: SHLP01

    $56.72 
       
  • Hi-pressure Sampling Hose
    Hi-pressure Sampling Hose

    Hi-pressure Sampling Hose

    $36.75
    P/N: SHHP01


       
    These hose assemblies are suitable for taking oil samples from high pressure systems equipped with standard gauge plugs.
    P/N: SHHP01

    $36.75 
       
  • Vacuum Sample Pump
    Vacuum Sample Pump

    Vacuum Sample Pump

    $33.66
    P/N: SP38


       
    These pumps will generate in excess of 27 inches of Hg, suitable for sampling of viscous fluids (i.e. oils).
    P/N: SP38

    $33.66