November 25, 2020 - We are open during the COVID-19 crisis. For more information click here.

  Email Us

  info.sales@lubrigard.com

SHOP BY

  • Filter By Sub Category
    Disposable Breathers
    Rebuildable Breathers
    Breather Parts
  • MANUFACTURER
    Des-Case
    Air Sentry
    Lubrigard
 Reset Filters
 
  •  
  •  
per page
  • DC-IL-EX-4-R Replacement Cartridge
    DC-IL-EX-4-R Replacement Cartridge

    DC-IL-EX-4-R Replacement Cartridge

    $261.38
    P/N: DC-IL-EX-4-R

    More often than not, bearing failures and system shutdowns can be linked back to lubricant system contamination. And contamination can be linked to unprotected breather vents. That fts why Des-Case Corporation has tailored drying solutions specific to the pump market with its line of VentGuardTM desiccant...

    SPECIFICATIONS
    5.665 inch x 9.98 inch , 1 inch FNPT, 3 micron
       
    Extended Series breathers with IsoLogic sensor technology. Part codes ending in ftR ft indicate the replacement cartridge
    P/N: DC-IL-EX-4-R

    $261.38 
       
  • DC-IL-EX-4 Extended Series Breather with ISOLogic Technology
    DC-IL-EX-4 Extended Series Breather with ISOLogic Technology

    DC-IL-EX-4 Extended Series Breather with ISOLogic Technology

    $286.38
    P/N: DC-IL-EX-4

    More often than not, bearing failures and system shutdowns can be linked back to lubricant system contamination. And contamination can be linked to unprotected breather vents. That fts why Des-Case Corporation has tailored drying solutions specific to the pump market with its line of VentGuardTM desiccant...

    SPECIFICATIONS
    5.665 inch x 9.98 inch , 1 inch FNPT, 3 micron
       
    Extended Series breathers with IsoLogic sensor technology. Part codes ending in ftR ft indicate the replacement cartridge
    P/N: DC-IL-EX-4

    $286.38 
       
  • DC-IL-VG-4-R Replacement Cartridge
    DC-IL-VG-4-R Replacement Cartridge

    DC-IL-VG-4-R Replacement Cartridge

    $182.63
    P/N: DC-IL-VG-4-R

    More often than not, bearing failures and system shutdowns can be linked back to lubricant system contamination. And contamination can be linked to unprotected breather vents. That fts why Des-Case Corporation has tailored drying solutions specific to the pump market with its line of VentGuardTM desiccant...

    SPECIFICATIONS
    4 inch x 10.1 inch, 1 inch Multi-Fit (NPT, BSPT, NPSM) , 3 micron
       
    VentGuard breathers with IsoLogic sensor technology. Part codes ending in ftR ft indicate the replacement cartridge
    P/N: DC-IL-VG-4-R

    $182.63 
       
  • DC-IL-VG-1-R Replacement Cartridge
    DC-IL-VG-1-R Replacement Cartridge

    DC-IL-VG-1-R Replacement Cartridge

    $99.15
    P/N: DC-IL-VG-1-R

    More often than not, bearing failures and system shutdowns can be linked back to lubricant system contamination. And contamination can be linked to unprotected breather vents. That fts why Des-Case Corporation has tailored drying solutions specific to the pump market with its line of VentGuardTM desiccant...

    SPECIFICATIONS
    2.5 inch x 5.3 inch, 3/8 inch Multi-Fit (NPT, BSPP, BSPT) , 3 micron
       
    VentGuard breathers with IsoLogic sensor technology. Part codes ending in ftR ft indicate the replacement cartridge
    P/N: DC-IL-VG-1-R

    $99.15 
       
  • DC-IL-VG-4 VentGuard Breather with ISOLogic Technology
    DC-IL-VG-4 VentGuard Breather with ISOLogic Technology

    DC-IL-VG-4 VentGuard Breather with ISOLogic Technology

    $207.63
    P/N: DC-IL-VG-4

    More often than not, bearing failures and system shutdowns can be linked back to lubricant system contamination. And contamination can be linked to unprotected breather vents. That fts why Des-Case Corporation has tailored drying solutions specific to the pump market with its line of VentGuardTM desiccant...

    SPECIFICATIONS
    4 inch x 10.1 inch, 1 inch Multi-Fit (NPT, BSPT, NPSM) , 3 micron
       
    VentGuard breathers with IsoLogic sensor technology. Part codes ending in ftR ft indicate the replacement cartridge
    P/N: DC-IL-VG-4

    $207.63 
       
  • DC-IL-VG-1 VentGuard Breather with ISOLogic Technology
    DC-IL-VG-1 VentGuard Breather with ISOLogic Technology

    DC-IL-VG-1 VentGuard Breather with ISOLogic Technology

    $124.15
    P/N: DC-IL-VG-1

    More often than not, bearing failures and system shutdowns can be linked back to lubricant system contamination. And contamination can be linked to unprotected breather vents. That fts why Des-Case Corporation has tailored drying solutions specific to the pump market with its line of VentGuardTM desiccant...

    SPECIFICATIONS
    2.5 inch x 5.3 inch, 3/8 inch Multi-Fit (NPT, BSPP, BSPT) , 3 micron
       
    VentGuard breathers with IsoLogic sensor technology. Part codes ending in ftR ft indicate the replacement cartridge
    P/N: DC-IL-VG-1

    $124.15 
       
  • Wired Connected VentGuard Breather Case of 6
    Wired Connected VentGuard Breather Case of 6

    Wired Connected VentGuard Breather Case of 6

    $594.91
    P/N: DC-IL-M8-VG-1-R

    More often than not, bearing failures and system shutdowns can be linked back to lubricant system contamination. And contamination can be linked to unprotected breather vents. That fts why Des-Case Corporation has tailored drying solutions specific to the pump market with its line of VentGuardTM desiccant...

    SPECIFICATIONS
    Unit Height 5.35 inch (13.5 cm), Diameter 2.52 inch (6.4 cm), Amount of Silica Gel: 0.3 lb. (0.136 kg), Adsorption Capacity: 1.68 fl.oz. (50 ml), Max Flow Rate: 1.45 cfm, Filtration: 3µ (absolute), Operating Temp. Range: -20°F to 200°F (-28.9°C to 93°C), Hydrophilic Agent: Silica Gel,...
       
    Hybrid technology breather for pumps
    P/N: DC-IL-M8-VG-1-R

    $594.91 
       
  • DC-IL-M8-VG-1 VentGuard Breather with ISOLogic Technology
    DC-IL-M8-VG-1 VentGuard Breather with ISOLogic Technology

    DC-IL-M8-VG-1 VentGuard Breather with ISOLogic Technology

    $124.09
    P/N: DC-IL-M8-VG-1

    More often than not, bearing failures and system shutdowns can be linked back to lubricant system contamination. And contamination can be linked to unprotected breather vents. That fts why Des-Case Corporation has tailored drying solutions specific to the pump market with its line of VentGuardTM desiccant...

    SPECIFICATIONS
    Unit Height 5.35 inch (13.5 cm), Diameter 2.52 inch (6.4 cm), Amount of Silica Gel: 0.3 lb. (0.136 kg), Adsorption Capacity: 1.68 fl.oz. (50 ml), Max Flow Rate: 1.45 cfm, Filtration: 3µ (absolute), Operating Temp. Range: -20°F to 200°F (-28.9°C to 93°C), Hydrophilic Agent: Silica Gel,...
       
    Hybrid technology breather for pumps
    P/N: DC-IL-M8-VG-1

    $124.09 
       
  • VaporGuard Oil Mist Adapter Double Length with Bottom Male Connector - 1" NPT / Female Top Port
    VaporGuard Oil Mist Adapter Double Length with Bottom Male Connector - 1" NPT / Female Top Port

    VaporGuard Oil Mist Adapter Double Length with Bottom Male Connector - 1" NPT / Female Top Port

    $295.00
    P/N: DC-OVG-6220-1000

    VaporGuard Oil Mist Adapter

       
    VaporGuard Oil Mist Adapter Double Length with Bottom Male Connector - 1 inch NPT / Female Top Port 1 inch
    P/N: DC-OVG-6220-1000

    $295.00 
       
  • 1" MNPT Steel Vent Valve Adapter for Extended Series Breathers
    1" MNPT Steel Vent Valve Adapter for Extended Series Breathers

    1" MNPT Steel Vent Valve Adapter for Extended Series Breathers

    $82.92
    P/N: DC-EXVA-16M

    1 inch MNPT Steel Vent Valve Adapter for Extended Series Breathers

    SPECIFICATIONS
    1 inch MNPT Steel Vent Valve Adapter for Extended Series Breathers
       
    Simple, dependable lubricant protection
    P/N: DC-EXVA-16M

    $82.92 
       
  • Compound Indicator Gauge For Pressure/Vacuum
    Compound Indicator Gauge For Pressure/Vacuum

    Compound Indicator Gauge For Pressure/Vacuum

    $20.00
    P/N: A655

    Hydraulic Reservoir Adapter Kits allow breathers to be installed on any hydraulic fluid tank or reservoir. The patent-pending aluminum adapters have quick connects in two sized for pumping oil in and out, allowing the system to remain closed at all times, dramatically reducing contamination while improving...

       
    Silver Hydraulic Reservoir Kit without Quick-connects.
    P/N: A655

    $20.00 
       
  • Flapper Valve Adapter for Extreme Duty Breather DC-XD-6
    Flapper Valve Adapter for Extreme Duty Breather DC-XD-6

    Flapper Valve Adapter for Extreme Duty Breather DC-XD-6

    $82.92
    P/N: DC-XDVA-16M

    Des-Case Extreme Duty breathers remove moisture and particulate contamination before they enter your system, so your equipment runs clean and dry. Use of a vent valve adapter helps prevent oil mist and slosh from entering the breather, thereby extending the life of the product. A preventative maintenance...

    SPECIFICATIONS
    Unit Height 3.1 inch (7.9 cm), Diameter 2.3 inch (5.8 cm), Venting Airflow: 19 scfm @ 1 PSI, Connection Size : 1 inch NPT
       
    The vent valve adapter helps prevent oil mist and slosh from entering the breather, thereby extending the life of the product.
    P/N: DC-XDVA-16M

    $82.92 
       
  • DC-EX-4 Extended Series Breather (5.7" x 10")
    DC-EX-4 Extended Series Breather (5.7" x 10")

    DC-EX-4 Extended Series Breather (5.7" x 10")

    $174.25
    P/N: DC-EX-4

    From the core standpipe to the tough polycarbonate exterior, every element of Des-Case fts disposable standard breather has been designed to stand up to the wide variety of industries and applications taking advantage of Des-Case fts contamination control expertise.Des-Case breathers attack the cause of...

    SPECIFICATIONS
    Unit Height 10 inch, Diameter 5.7 inch, Shipping Weight: 6.5 lb., Amount of Silica Gel: 4.2 lb., Adsorption Capacity: 27 fl oz, Max. Flow Rate (cfm): 24 cfm, Operating Temp. Range: -20°F to 200°F (-29°C to 93°C), Body Material: Nylon & Polycarbonate, Hydrophilic Agent: Silica Gel, Filter...
       
    Simple, dependable lubricant protection
    P/N: DC-EX-4

    $174.25 
       
  • DC-EX-3 Extended Series Breather (5.7" x 8.2")
    DC-EX-3 Extended Series Breather (5.7" x 8.2")

    DC-EX-3 Extended Series Breather (5.7" x 8.2")

    $158.50
    P/N: DC-EX-3

    From the core standpipe to the tough polycarbonate exterior, every element of Des-Case fts disposable standard breather has been designed to stand up to the wide variety of industries and applications taking advantage of Des-Case fts contamination control expertise.Des-Case breathers attack the cause of...

    SPECIFICATIONS
    Unit Height 8.2 inch, Diameter 5.7 inch, Shipping Weight: 5.5 lb., Amount of Silica Gel: 3.2 lb., Adsorption Capacity: 20.5 fl oz, Max. Flow Rate (cfm): 25 cfm, Operating Temp. Range: -20°F to 200°F (-29°C to 93°C), Body Material: Nylon & Polycarbonate, Hydrophilic Agent: Silica Gel,...
       
    Simple, dependable lubricant protection
    P/N: DC-EX-3

    $158.50 
       
  • DC-EX-2 Extended Series Breather (5.7" x 6.4")
    DC-EX-2 Extended Series Breather (5.7" x 6.4")

    DC-EX-2 Extended Series Breather (5.7" x 6.4")

    $142.75
    P/N: DC-EX-2

    From the core standpipe to the tough polycarbonate exterior, every element of Des-Case fts disposable standard breather has been designed to stand up to the wide variety of industries and applications taking advantage of Des-Case fts contamination control expertise.Des-Case breathers attack the cause of...

    SPECIFICATIONS
    Unit Height 6.4 inch, Diameter 5.7 inch, Shipping Weight: 4.1 lb., Amount of Silica Gel: 2.2 lb., Adsorption Capacity: 14.1 fl oz, Max. Flow Rate (cfm): 26 cfm, Operating Temp. Range: -20°F to 200°F (-29°C to 93°C), Body Material: Nylon & Polycarbonate, Hydrophilic Agent: Silica Gel,...
       
    Simple, dependable lubricant protection
    P/N: DC-EX-2

    $142.75 
       
  • DC-EX-1 Extended Series Breather (5.7" x 4.7")
    DC-EX-1 Extended Series Breather (5.7" x 4.7")

    DC-EX-1 Extended Series Breather (5.7" x 4.7")

    $127.00
    P/N: DC-EX-1

    From the core standpipe to the tough polycarbonate exterior, every element of Des-Case fts disposable standard breather has been designed to stand up to the wide variety of industries and applications taking advantage of Des-Case fts contamination control expertise.Des-Case breathers attack the cause of...

    SPECIFICATIONS
    Unit Height 4.7 inch, Diameter 5.7 inch, Shipping Weight: 3 lb., Amount of Silica Gel: 1.2 lb., Adsorption Capacity: 7.7 fl oz, Max. Flow Rate (cfm): 27 cfm, Operating Temp. Range: -20°F to 200°F (-29°C to 93°C), Body Material: Nylon & Polycarbonate, Hydrophilic Agent: Silica Gel, Filter...
       
    Simple, dependable lubricant protection
    P/N: DC-EX-1

    $127.00 
       
  • DC-ND-2 Oil Coalescing Non-Desiccant Breather
    DC-ND-2 Oil Coalescing Non-Desiccant Breather

    DC-ND-2 Oil Coalescing Non-Desiccant Breather

    $25.15
    P/N: DC-ND-2

    Industry spends millions of dollars annually treating the negative effects of contamination caused by wet, dirty air. Contaminated lubricating oil and hydraulic fluid results in excess machine wear, production downtime, and repair costs. Des-Case breathers attack the cause of contamination, allowing your...

    SPECIFICATIONS
    Unit Height 1.35 inch (3.43 cm), Diameter 1.80 inch (4.57 cm), Amount of Silica Gel: n/a, Adsorption Capacity: n/a, Max Flow Rate: 0.67 cfm @ 1 PSID, Filtration: 0.3µ (absolute), Operating Temp. Range: -40°F to 300°F (-40°C to 149°C), Hydrophilic Agent: n/a, Filter Media: Oleophobic...
       
    Non-desiccant filters
    P/N: DC-ND-2

    $25.15 
       
  • DC-ND-35 Oil Coalescing Non-Desiccant Breather
    DC-ND-35 Oil Coalescing Non-Desiccant Breather

    DC-ND-35 Oil Coalescing Non-Desiccant Breather

    $88.15
    P/N: DC-ND-35

    Industry spends millions of dollars annually treating the negative effects of contamination caused by wet, dirty air. Contaminated lubricating oil and hydraulic fluid results in excess machine wear, production downtime, and repair costs. Des-Case breathers attack the cause of contamination, allowing your...

    SPECIFICATIONS
    Unit Height 5 inch (12.7 cm), Diameter 5 inch (12.7 cm), Amount of Silica Gel: n/a, Adsorption Capacity: n/a, Max Flow Rate: 40 cfm @ 1 PSID, Filtration: 0.3µ (absolute), Operating Temp. Range: -40°F to 300°F (-40°C to 149°C), Hydrophilic Agent: n/a, Filter Media: Oleophobic Polyester,...
       
    Non-desiccant filters
    P/N: DC-ND-35

    $88.15 
       
  • DC-VG-4 VentGuard Breather (Hybrid Breather)
    DC-VG-4 VentGuard Breather (Hybrid Breather)

    DC-VG-4 VentGuard Breather (Hybrid Breather)

    $121.75
    P/N: DC-VG-4

    More often than not, bearing failures and system shutdowns can be linked back to lubricant system contamination. And contamination can be linked to unprotected breather vents. That fts why Des-Case Corporation has tailored drying solutions specific to the pump market with its line of VentGuardTM desiccant...

    SPECIFICATIONS
    Unit Height 10.125 inch , Diameter 4 inch , Filtration: 3µ (absolute), Operating Temp. Range: -20°F to 200°F (-28.9°C to 93°C), Hydrophilic Agent: Silica Gel, Filter Media: Polyester, Connection Size: 1 inch NPT
       
    Hybrid technology breather for pumps
    P/N: DC-VG-4

    $121.75 
       
  • DC-VG-3 VentGuard Breather (Hybrid Breather)
    DC-VG-3 VentGuard Breather (Hybrid Breather)

    DC-VG-3 VentGuard Breather (Hybrid Breather)

    $110.20
    P/N: DC-VG-3

    More often than not, bearing failures and system shutdowns can be linked back to lubricant system contamination. And contamination can be linked to unprotected breather vents. That fts why Des-Case Corporation has tailored drying solutions specific to the pump market with its line of VentGuardTM desiccant...

    SPECIFICATIONS
    Unit Height 8.125 inch (20.6 cm), Diameter 4 inch 10.2 cm), Amount of Silica Gel: 1.22 lb. (0.56 kg), Adsorption Capacity: 7.45 fl.oz. (220.3 ml), Max Flow Rate: 2.28 cfm @ 1 PSID, Filtration: 3µ (absolute), Operating Temp. Range: -20°F to 200°F (-28.9°C to 93°C), Hydrophilic Agent: Silica...
       
    Hybrid technology breather for pumps
    P/N: DC-VG-3

    $110.20 
       
  • DC-VG-2 VentGuard Breather (Hybrid Breather)
    DC-VG-2 VentGuard Breather (Hybrid Breather)

    DC-VG-2 VentGuard Breather (Hybrid Breather)

    $98.65
    P/N: DC-VG-2

    More often than not, bearing failures and system shutdowns can be linked back to lubricant system contamination. And contamination can be linked to unprotected breather vents. That fts why Des-Case Corporation has tailored drying solutions specific to the pump market with its line of VentGuardTM desiccant...

    SPECIFICATIONS
    Unit Height 6. inch (15.6 cm), Diameter 4.1 inch 10.2 cm), Amount of Silica Gel: 0.66 lb. (0.30 kg), Adsorption Capacity: 4 fl.oz. (118.2 ml), Max Flow Rate: 2.44 cfm, Filtration: 3µ (absolute), Operating Temp. Range: -20°F to 200°F (-28.9°C to 93°C), Hydrophilic Agent: Silica Gel, Filter...
       
    Hybrid technology breather for pumps
    P/N: DC-VG-2

    $98.65 
       
  • DC-VG-BB VentGuard Breather (Hybrid Breather)
    DC-VG-BB VentGuard Breather (Hybrid Breather)

    DC-VG-BB VentGuard Breather (Hybrid Breather)

    $55.60
    P/N: DC-VG-BB

    More often than not, bearing failures and system shutdowns can be linked back to lubricant system contamination. And contamination can be linked to unprotected breather vents. That fts why Des-Case Corporation has tailored drying solutions specific to the pump market with its line of VentGuardTM desiccant...

    SPECIFICATIONS
    Unit Height 3.9 inch, Diameter 2.52 inch, Amount of Silica Gel: 0.13 lb. (58.6 g), Adsorption Capacity: 0.8 fl.oz. (23 ml), Max Flow Rate: 1.45 cfm @ 1 PSID, Filtration: 3µ (absolute), Operating Temp. Range: -20°F to 200°F (-28.9°C to 93°C), Hydrophilic Agent: Silica Gel, Filter Media:...
       
    Hybrid technology breather for pumps
    P/N: DC-VG-BB

    $55.60 
       
  • DC-HG-1 HydroGuard Hybrid Breather
    DC-HG-1 HydroGuard Hybrid Breather

    DC-HG-1 HydroGuard Hybrid Breather

    $83.95
    P/N: DC-HG-1

    More often than not, bearing failures and system shutdowns can be linked back to lubricant system contamination. And contamination can be linked to unprotected breather vents. That fts why Des-Case Corporation has tailored drying solutions specific to the pump market with its line of VentGuardTM desiccant...

    SPECIFICATIONS
    Unit Height 7.2 inch (18.3 cm), Diameter 2.53 inch (6.5 cm), Amount of Silica Gel: 0.3 lb. (0.136 kg), Adsorption Capacity: 0.8 fl.oz. (29.6 ml), Max Flow Rate: 1 cfm @ 1.5 PSID, Filtration: 3µ (absolute), Operating Temp. Range: -20°F to 200°F (-28.9°C to 93°C), Hydrophilic Agent: Silica...
       
    Hybrid technology breather for pumps
    P/N: DC-HG-1

    $83.95 
       
  • DC-XD-6 Extreme Duty Breather
    DC-XD-6 Extreme Duty Breather

    DC-XD-6 Extreme Duty Breather

    $161.65
    P/N: DC-XD-6

    Every element of Des-Case fts Extreme Duty Disposable Breathers has been designed to take contamination control to a whole new level, standing up to a wide variety of applications in challenging environments. Des-Case extreme-duty breathers attack the cause of contamination, keeping dirt and water where it...

    SPECIFICATIONS
    Unit Height 6.51 inch (16.54 cm), Diameter 5.1 inch (12.95 cm), Amount of Silica Gel: 1 lb. 12 oz. (790 g), Adsorption Capacity: 10.72 fl.oz. (315 ml), Connection Size: 1-1/2 inch x 16 Straight Thread, Max. Flow Rate (cfm): 20 @ 1 PSID, Operating Temp. Range: -40°F to 300°F (-40°C to 149°C),...
       
    Ideal for harsh environments
    P/N: DC-XD-6

    $161.65 
       
  • Flapper Valve Adapter for Extreme Duty Breather DC-XD-6
    Flapper Valve Adapter for Extreme Duty Breather DC-XD-6

    Flapper Valve Adapter for Extreme Duty Breather DC-XD-6

    $82.92
    P/N: DC-XDVA-12M

    Des-Case Extreme Duty breathers remove moisture and particulate contamination before they enter your system, so your equipment runs clean and dry. Use of a vent valve adapter helps prevent oil mist and slosh from entering the breather, thereby extending the life of the product. A preventative maintenance...

    SPECIFICATIONS
    Unit Height 3.1 inch (7.9 cm), Diameter 2.3 inch (5.8 cm), Venting Airflow: 19 scfm @ 1 PSI, Connection Size : 3/4 inch NPT
       
    The vent valve adapter helps prevent oil mist and slosh from entering the breather, thereby extending the life of the product.
    P/N: DC-XDVA-12M

    $82.92 
       
  • 1/8" Vacuum Indicator for DC-SB
    1/8" Vacuum Indicator for DC-SB

    1/8" Vacuum Indicator for DC-SB

    $29.72
    P/N: DC-SB-VI

    Connects DoublePlayTM and TriplePlayTM to 1 inch female threaded connection with single-position vacuum indicator.

       
    Breather Adaptor
    P/N: DC-SB-VI

    $29.72 
       
  • Rebuildable Steel Breather - 200 lbs.
    Rebuildable Steel Breather - 200 lbs.

    Rebuildable Steel Breather - 200 lbs.

    $5,348.95
    P/N: DC-RS-200

    Resilient construction provides durability and allows oil mist to coalesce and drain back into a reservoir. Replaceable polyethylene microglass filter prevents particles to 1-micron absolute from entering the system. Easy-to-replace desiccant bags remove moisture from incoming air, extending fluid and system...

    SPECIFICATIONS
    Unit Height 42.75 inch (108.6 cm), Diameter 23.5 inch (59.69 cm), Connection Size: 4 inch NPT, Amount of Desiccant: 200 lb. (90.72 kg), Flow Rate at 0.5 PSID: 240, Approx. Dry Weight: 315 lb. (142.88 kg), Adsorption Capacity: 36.0 L (9.51 gal), Operating Temp. Range: -20°F to 220°F (-29°C to...
       
    For harsh or corrosive environments
    P/N: DC-RS-200

    $5,348.95 
       
  • Rebuildable Steel Breather - 150 lbs.
    Rebuildable Steel Breather - 150 lbs.

    Rebuildable Steel Breather - 150 lbs.

    $4,443.95
    P/N: DC-RS-150

    Resilient construction provides durability and allows oil mist to coalesce and drain back into a reservoir. Replaceable polyethylene microglass filter prevents particles to 1-micron absolute from entering the system. Easy-to-replace desiccant bags remove moisture from incoming air, extending fluid and system...

    SPECIFICATIONS
    Unit Height 36.75 inch (93.3 cm), Diameter 23.5 inch (59.69 cm), Connection Size: 4 inch NPT, Amount of Desiccant: 150 lb. (68.04 kg), Flow Rate at 0.5 PSID: 250, Approx. Dry Weight: 253 lb. (114.76 kg), Adsorption Capacity: 27.0 L (7.13 gal), Operating Temp. Range: -20°F to 220°F (-29°C to...
       
    For harsh or corrosive environments
    P/N: DC-RS-150

    $4,443.95 
       
  • Rebuildable Steel Breather - 100 lbs.
    Rebuildable Steel Breather - 100 lbs.

    Rebuildable Steel Breather - 100 lbs.

    $3,332.95
    P/N: DC-RS-100

    Resilient construction provides durability and allows oil mist to coalesce and drain back into a reservoir. Replaceable polyethylene microglass filter prevents particles to 1-micron absolute from entering the system. Easy-to-replace desiccant bags remove moisture from incoming air, extending fluid and system...

    SPECIFICATIONS
    Unit Height 31 inch (78.7 cm), Diameter 23.5 inch (59.69 cm), Connection Size: 4 inch NPT, Amount of Desiccant: 100 lb. (45.36 kg), Flow Rate at 0.5 PSID: 270, Approx. Dry Weight: 190 lb. (86.18 kg), Adsorption Capacity: 18.0 L (4.75 gal), Operating Temp. Range: -20°F to 220°F (-29°C to...
       
    For harsh or corrosive environments
    P/N: DC-RS-100

    $3,332.95 
       
  • Rebuildable Steel Breather - 75 lbs.
    Rebuildable Steel Breather - 75 lbs.

    Rebuildable Steel Breather - 75 lbs.

    $2,524.95
    P/N: DC-RS-75

    Resilient construction provides durability and allows oil mist to coalesce and drain back into a reservoir. Replaceable polyethylene microglass filter prevents particles to 1-micron absolute from entering the system. Easy-to-replace desiccant bags remove moisture from incoming air, extending fluid and system...

    SPECIFICATIONS
    Unit Height 39.75 inch (101 cm), Diameter 15.5 inch (39.37 cm), Connection Size: 3 inch NPT, Amount of Desiccant: 75 lb. (34.02 kg), Flow Rate at 0.5 PSID: 80, Approx. Dry Weight: 144 lb. (65.32 kg), Adsorption Capacity: 13.5 L (3.57 gal), Operating Temp. Range: -20°F to 220°F (-29°C to...
       
    For harsh or corrosive environments
    P/N: DC-RS-75

    $2,524.95 
       
  • Rebuildable Steel Breather - 50 lbs.
    Rebuildable Steel Breather - 50 lbs.

    Rebuildable Steel Breather - 50 lbs.

    $2,019.95
    P/N: DC-RS-50

    Resilient construction provides durability and allows oil mist to coalesce and drain back into a reservoir. Replaceable polyethylene microglass filter prevents particles to 1-micron absolute from entering the system. Easy-to-replace desiccant bags remove moisture from incoming air, extending fluid and system...

    SPECIFICATIONS
    Unit Height 31.25 inch (79.4 cm), Diameter 15.5 inch (39.37 cm), Connection Size: 3 inch NPT, Amount of Desiccant: 50 lb. (22.68 kg), Flow Rate at 0.5 PSID: 115, Approx. Dry Weight: 100 lb. (45.36 kg), Adsorption Capacity: 9.0 L (2.38 gal), Operating Temp. Range: -20°F to 220°F (-29°C to...
       
    For harsh or corrosive environments
    P/N: DC-RS-50

    $2,019.95 
       
  • Rebuildable Steel Breather - 25 lbs.
    Rebuildable Steel Breather - 25 lbs.

    Rebuildable Steel Breather - 25 lbs.

    $1,615.95
    P/N: DC-RS-25

    Resilient construction provides durability and allows oil mist to coalesce and drain back into a reservoir. Replaceable polyethylene microglass filter prevents particles to 1-micron absolute from entering the system. Easy-to-replace desiccant bags remove moisture from incoming air, extending fluid and system...

    SPECIFICATIONS
    Unit Height 22.5 inch (57.1 cm), Diameter 15.5 inch (39.37 cm), Connection Size: 3 inch NPT, Amount of Desiccant: 25 lb. (11.34 kg), Flow Rate at 0.5 PSID: 140, Approx. Dry Weight: 64 lb. (29.03 kg), Adsorption Capacity: 4.5 L (1.19 gal), Operating Temp. Range: -20°F to 220°F (-29°C to...
       
    For harsh or corrosive environments
    P/N: DC-RS-25

    $1,615.95 
       
  • Rebuildable Steel Breather - 15 lbs.
    Rebuildable Steel Breather - 15 lbs.

    Rebuildable Steel Breather - 15 lbs.

    $1,312.95
    P/N: DC-RS-15

    Resilient construction provides durability and allows oil mist to coalesce and drain back into a reservoir. Replaceable polyethylene microglass filter prevents particles to 1-micron absolute from entering the system. Easy-to-replace desiccant bags remove moisture from incoming air, extending fluid and system...

    SPECIFICATIONS
    Unit Height 19.25 inch (48.9 cm), Diameter 15.5 inch (39.37 cm), Connection Size: 3 inch NPT, Amount of Desiccant: 15 lb. (6.80 kg), Flow Rate at 0.5 PSID: 205, Approx. Dry Weight: 49 lb. (22.23 kg), Adsorption Capacity: 2.7 L (0.71 gal), Operating Temp. Range: -20°F to 220°F (-29°C to...
       
    For harsh or corrosive environments
    P/N: DC-RS-15

    $1,312.95 
       
  • Rebuildable Steel Breather - 9 lbs.
    Rebuildable Steel Breather - 9 lbs.

    Rebuildable Steel Breather - 9 lbs.

    $1,211.95
    P/N: DC-RS-9

    Resilient construction provides durability and allows oil mist to coalesce and drain back into a reservoir. Replaceable polyethylene microglass filter prevents particles to 1-micron absolute from entering the system. Easy-to-replace desiccant bags remove moisture from incoming air, extending fluid and system...

    SPECIFICATIONS
    Unit Height 18.25 inch (46.4 cm), Diameter 10.13 inch (25.72 cm), Connection Size: 2 inch NPT, Amount of Desiccant: 9 lb. (4.08 kg), Flow Rate at 0.5 PSID: 80, Approx. Dry Weight: 27 lb. (12.25 kg), Adsorption Capacity: 1.62 L (0.43 gal), Operating Temp. Range: -20°F to 220°F (-29°C to...
       
    For harsh or corrosive environments
    P/N: DC-RS-9

    $1,211.95 
       
  • Rebuildable Steel Breather - 5 lbs.
    Rebuildable Steel Breather - 5 lbs.

    Rebuildable Steel Breather - 5 lbs.

    $1,009.95
    P/N: DC-RS-5

    Resilient construction provides durability and allows oil mist to coalesce and drain back into a reservoir. Replaceable polyethylene microglass filter prevents particles to 1-micron absolute from entering the system. Easy-to-replace desiccant bags remove moisture from incoming air, extending fluid and system...

    SPECIFICATIONS
    Unit Height 13.75 inch (34.9 cm), Diameter 10.13 inch (25.72 cm), Connection Size: 2 inch NPT, Amount of Desiccant: 5 lb. (2.27 kg), Flow Rate at 0.5 PSID: 85, Approx. Dry Weight: 20 lb. (9.07 kg), Adsorption Capacity: 0.90 L (0.24 gal), Operating Temp. Range: -20°F to 220°F (-29°C to 104°C)
       
    For harsh or corrosive environments
    P/N: DC-RS-5

    $1,009.95 
       
  • Rebuildable Steel Breather - 3 lbs.
    Rebuildable Steel Breather - 3 lbs.

    Rebuildable Steel Breather - 3 lbs.

    $838.25
    P/N: DC-RS-3

    Resilient construction provides durability and allows oil mist to coalesce and drain back into a reservoir. Replaceable polyethylene microglass filter prevents particles to 1-micron absolute from entering the system. Easy-to-replace desiccant bags remove moisture from incoming air, extending fluid and system...

    SPECIFICATIONS
    Unit Height 11.5 inch (29.2 cm), Diameter 10.13 inch (25.72 cm), Connection Size: 2 inch NPT, Amount of Desiccant: 3 lb. (1.36 kg), Flow Rate at 0.5 PSID: 85, Approx. Dry Weight: 16 lb. (7.26 kg), Adsorption Capacity: 0.54 L (0.14 gal), Operating Temp. Range: -20°F to 220°F (-29°C to 104°C)
       
    For harsh or corrosive environments
    P/N: DC-RS-3

    $838.25 
       
  • DC-VG-1 VentGuard Breather
    DC-VG-1 VentGuard Breather

    DC-VG-1 VentGuard Breather

    $66.09
    P/N: DC-VG-1

    More often than not, bearing failures and system shutdowns can be linked back to lubricant system contamination. And contamination can be linked to unprotected breather vents. That fts why Des-Case Corporation has tailored drying solutions specific to the pump market with its line of VentGuardTM desiccant...

    SPECIFICATIONS
    Unit Height 5.35 inch (13.5 cm), Diameter 2.52 inch (6.4 cm), Amount of Silica Gel: 0.3 lb. (0.136 kg), Adsorption Capacity: 1.68 fl.oz. (50 ml), Max Flow Rate: 1.45 cfm, Filtration: 3µ (absolute), Operating Temp. Range: -20°F to 200°F (-28.9°C to 93°C), Hydrophilic Agent: Silica Gel,...
       
    Hybrid technology breather for pumps
    P/N: DC-VG-1

    $66.09 
       
  • DC-HG-8 HydroGuard Hybrid Breather
    DC-HG-8 HydroGuard Hybrid Breather

    DC-HG-8 HydroGuard Hybrid Breather

    $125.95
    P/N: DC-HG-8

    From the expansion chamber system to the check valves, every element of Des-Case fts patented HydroguardTM breather has been designed to stand up to a wide variety of industries and applications taking advantage of Des-Case fts contamination control expertise. HydroguardTM breathers by Des-Case attack the...

    SPECIFICATIONS
    Unit Height: 9.75 inch ( 24.76 cm), Diameter: 4.1 inch ( 10.41 cm ), Amount of Silica Gel: 10.4 oz. ( 240 g ), Adsorption Capacity: 4.05 fl.oz. (120 ml), Max. Flow Rate: 2.5 cfm @ 1 PSID, Filtration: 3µ (absolute), Operating Temp. Range: -20°F to 200°F ( -28.9°C to 93°C ), Hydrophilic...
       
    Hybrid technology breather for specialty applications
    P/N: DC-HG-8

    $125.95 
       
  • DC-3 Breather (4" x 7")
    DC-3 Breather (4" x 7")

    DC-3 Breather (4" x 7")

    $77.65
    P/N: DC-3

    From the core standpipe to the tough polycarbonate exterior, every element of Des-Case fts disposable standard breather has been designed to stand up to the wide variety of industries and applications taking advantage of Des-Case fts contamination control expertise.Des-Case breathers attack the cause of...

    SPECIFICATIONS
    Unit Height 8 inch (20.6 cm), Diameter 4 inch (10.2 cm), Shipping Weight: 1 lb. 12 oz., Amount of Silica Gel: 1 lb. 4 oz. (0.56 kg), Adsorption Capacity: 7.45 fl oz (220ml), Max. Flow Rate (cfm): 16, Operating Temp. Range: -20°F to 200°F (-29°C to 93°C), Body Material: Nylon & Polycarbonate,...
       
    Simple, dependable lubricant protection
    P/N: DC-3

    $77.65 
       
  • DC-1 Breather (2.75" X 5.25")
    DC-1 Breather (2.75" X 5.25")

    DC-1 Breather (2.75" X 5.25")

    $45.10
    P/N: DC-1

    From the core standpipe to the tough polycarbonate exterior, every element of Des-Case fts disposable standard breather has been designed to stand up to the wide variety of industries and applications taking advantage of Des-Case fts contamination control expertise.Des-Case breathers attack the cause of...

    SPECIFICATIONS
    Unit Height 5.35 inch (13.5 cm), Diameter 2.5 inch (6.4 cm), Amount of Silica Gel: 4 oz. (113 g), Adsorption Capacity: 4 fl.oz. ( 50 ml ), Max. Flow Rate (cfm): 4.16, Filtration: 3µ (absolute), Operating Temp. Range: -20°F to 200°F (-29°C to 93°C), Hydrophilic Agent: Silica Gel, Filter...
       
    Diminutive design aids installation in confined areas.
    P/N: DC-1

    $45.10 
       
  • DC-BB Button Breather (2.75" X 3.25")
    DC-BB Button Breather (2.75" X 3.25")

    DC-BB Button Breather (2.75" X 3.25")

    $34.60
    P/N: DC-BB

    From the core standpipe to the tough polycarbonate exterior, every element of Des-Case fts disposable standard breather has been designed to stand up to the wide variety of industries and applications taking advantage of Des-Case fts contamination control expertise.Des-Case breathers attack the cause of...

    SPECIFICATIONS
    Unit Height 3.9 inch (9.9 cm), Diameter 2.5 inch (6.4 cm), Amount of Silica Gel: 2 oz. (57 g), Adsorption Capacity: 0.8 fl.oz. ( 23 ml ), Max. Flow Rate (cfm): 3 @ 1 PSID, Filtration: 3µ (absolute), Operating Temp. Range: -20°F to 200°F (-29°C to 93°C), Hydrophilic Agent: Silica Gel,...
       
    Diminutive design aids installation in confined areas.
    P/N: DC-BB

    $34.60 
       
  • DC-4 Breather (4" x 9")
    DC-4 Breather (4" x 9")

    DC-4 Breather (4" x 9")

    $88.15
    P/N: DC-4

    From the core standpipe to the tough polycarbonate exterior, every element of Des-Case fts disposable standard breather has been designed to stand up to the wide variety of industries and applications taking advantage of Des-Case fts contamination control expertise.Des-Case breathers attack the cause of...

    SPECIFICATIONS
    Unit Height 10 inch (25.7 cm), Diameter 4 inch (10.2 cm), Shipping Weight: 2 lb. 7 oz., Amount of Silica Gel: 1 lb. 14 oz. (0.85 kg), Adsorption Capacity: 11.3 fl oz (353ml), Max. Flow Rate (cfm): 16, Operating Temp. Range: -20°F to 200°F (-29°C to 93°C), Body Material: Nylon &...
       
    Simple, dependable lubricant protection
    P/N: DC-4

    $88.15 
       
  • 3 micron Spin-on air breather (3/4" MNPT)
    3 micron Spin-on air breather (3/4" MNPT)

    3 micron Spin-on air breather (3/4" MNPT)

    $70.75
    P/N: AB03F34


    SPECIFICATIONS
    Micron Rating: 3 micron, Oil / Tank connection: 3/4 inch NPT, Adaptor Material: Steel, Air flow rate: 18 cfm (0.51 m3/m), Air displacement: 135 gpm (511 lpm)
       
    3 micron, 3/4 inch M-NPT spin-on air breather
    P/N: AB03F34

    $70.75 
       
  • 3 micron air breather
    3 micron air breather

    3 micron air breather

    $32.43
    P/N: AB03M34


    SPECIFICATIONS
    Breather Cap: Steel, chrome plated, Socket: Steel, chrome plated, Air filter insert: 3 micron paper, Oil / Tank connection: 3/4 inch NPT, Air flow rate: 0.45 m3/min
       
    3 micron, 3/4 inch NPT chrome-plated air breather
    P/N: AB03M34

    $32.43 
       
  • DC-2 Breather (4" x 5")
    DC-2 Breather (4" x 5")

    DC-2 Breather (4" x 5")

    $67.15
    P/N: DC-2

    From the core standpipe to the tough polycarbonate exterior, every element of Des-Case fts disposable standard breather has been designed to stand up to the wide variety of industries and applications taking advantage of Des-Case fts contamination control expertise.Des-Case breathers attack the cause of...

    SPECIFICATIONS
    Unit Height 6 inch (15.6 cm), Diameter 4 inch (10.2 cm), Shipping Weight: 1 lb. 3 oz., Amount of Silica Gel: 11 oz. (0.31 kg), Adsorption Capacity: 4 fl oz (118 ml), Max. Flow Rate (cfm): 16, Operating Temp. Range: -20°F to 200°F (-29°C to 93°C), Body Material: Nylon & Polycarbonate,...
       
    Simple, dependable lubricant protection
    P/N: DC-2

    $67.15 
       
 
  •  
  •  
DC-IL-EX-4-R Replacement Cartridge

DC-IL-EX-4-R Replacement Cartridge

$261.38
P/N: DC-IL-EX-4-R

More often than not, bearing failures and system shutdowns can be linked back to lubricant system contamination. And contamination can be linked to unprotected breather vents. That fts why Des-Case Corporation has tailored drying solutions specific to the pump market with its line of VentGuardTM desiccant...

SPECIFICATIONS
5.665 inch x 9.98 inch , 1 inch FNPT, 3 micron
   
DC-IL-EX-4 Extended Series Breather with ISOLogic Technology

DC-IL-EX-4 Extended Series Breather with ISOLogic Technology

$286.38
P/N: DC-IL-EX-4

More often than not, bearing failures and system shutdowns can be linked back to lubricant system contamination. And contamination can be linked to unprotected breather vents. That fts why Des-Case Corporation has tailored drying solutions specific to the pump market with its line of VentGuardTM desiccant...

SPECIFICATIONS
5.665 inch x 9.98 inch , 1 inch FNPT, 3 micron
   
DC-IL-VG-4-R Replacement Cartridge

DC-IL-VG-4-R Replacement Cartridge

$182.63
P/N: DC-IL-VG-4-R

More often than not, bearing failures and system shutdowns can be linked back to lubricant system contamination. And contamination can be linked to unprotected breather vents. That fts why Des-Case Corporation has tailored drying solutions specific to the pump market with its line of VentGuardTM desiccant...

SPECIFICATIONS
4 inch x 10.1 inch, 1 inch Multi-Fit (NPT, BSPT, NPSM) , 3 micron
   
DC-IL-VG-1-R Replacement Cartridge

DC-IL-VG-1-R Replacement Cartridge

$99.15
P/N: DC-IL-VG-1-R

More often than not, bearing failures and system shutdowns can be linked back to lubricant system contamination. And contamination can be linked to unprotected breather vents. That fts why Des-Case Corporation has tailored drying solutions specific to the pump market with its line of VentGuardTM desiccant...

SPECIFICATIONS
2.5 inch x 5.3 inch, 3/8 inch Multi-Fit (NPT, BSPP, BSPT) , 3 micron
   
DC-IL-VG-4 VentGuard Breather with ISOLogic Technology

DC-IL-VG-4 VentGuard Breather with ISOLogic Technology

$207.63
P/N: DC-IL-VG-4

More often than not, bearing failures and system shutdowns can be linked back to lubricant system contamination. And contamination can be linked to unprotected breather vents. That fts why Des-Case Corporation has tailored drying solutions specific to the pump market with its line of VentGuardTM desiccant...

SPECIFICATIONS
4 inch x 10.1 inch, 1 inch Multi-Fit (NPT, BSPT, NPSM) , 3 micron
   
DC-IL-VG-1 VentGuard Breather with ISOLogic Technology

DC-IL-VG-1 VentGuard Breather with ISOLogic Technology

$124.15
P/N: DC-IL-VG-1

More often than not, bearing failures and system shutdowns can be linked back to lubricant system contamination. And contamination can be linked to unprotected breather vents. That fts why Des-Case Corporation has tailored drying solutions specific to the pump market with its line of VentGuardTM desiccant...

SPECIFICATIONS
2.5 inch x 5.3 inch, 3/8 inch Multi-Fit (NPT, BSPP, BSPT) , 3 micron
   
Wired Connected VentGuard Breather Case of 6

Wired Connected VentGuard Breather Case of 6

$594.91
P/N: DC-IL-M8-VG-1-R

More often than not, bearing failures and system shutdowns can be linked back to lubricant system contamination. And contamination can be linked to unprotected breather vents. That fts why Des-Case Corporation has tailored drying solutions specific to the pump market with its line of VentGuardTM desiccant...

SPECIFICATIONS
Unit Height 5.35 inch (13.5 cm), Diameter 2.52 inch (6.4 cm), Amount of Silica Gel: 0.3 lb. (0.136 kg), Adsorption Capacity: 1.68 fl.oz. (50 ml), Max Flow Rate: 1.45 cfm, Filtration: 3µ (absolute), Operating Temp. Range: -20°F to 200°F (-28.9°C to 93°C), Hydrophilic Agent: Silica Gel,...
   
DC-IL-M8-VG-1 VentGuard Breather with ISOLogic Technology

DC-IL-M8-VG-1 VentGuard Breather with ISOLogic Technology

$124.09
P/N: DC-IL-M8-VG-1

More often than not, bearing failures and system shutdowns can be linked back to lubricant system contamination. And contamination can be linked to unprotected breather vents. That fts why Des-Case Corporation has tailored drying solutions specific to the pump market with its line of VentGuardTM desiccant...

SPECIFICATIONS
Unit Height 5.35 inch (13.5 cm), Diameter 2.52 inch (6.4 cm), Amount of Silica Gel: 0.3 lb. (0.136 kg), Adsorption Capacity: 1.68 fl.oz. (50 ml), Max Flow Rate: 1.45 cfm, Filtration: 3µ (absolute), Operating Temp. Range: -20°F to 200°F (-28.9°C to 93°C), Hydrophilic Agent: Silica Gel,...
   
VaporGuard Oil Mist Adapter Double Length with Bottom Male Connector - 1" NPT / Female Top Port

VaporGuard Oil Mist Adapter Double Length with Bottom Male Connector - 1" NPT / Female Top Port

$295.00
P/N: DC-OVG-6220-1000

VaporGuard Oil Mist Adapter

   
1" MNPT Steel Vent Valve Adapter for Extended Series Breathers

1" MNPT Steel Vent Valve Adapter for Extended Series Breathers

$82.92
P/N: DC-EXVA-16M

1 inch MNPT Steel Vent Valve Adapter for Extended Series Breathers

SPECIFICATIONS
1 inch MNPT Steel Vent Valve Adapter for Extended Series Breathers
   
Compound Indicator Gauge For Pressure/Vacuum

Compound Indicator Gauge For Pressure/Vacuum

$20.00
P/N: A655

Hydraulic Reservoir Adapter Kits allow breathers to be installed on any hydraulic fluid tank or reservoir. The patent-pending aluminum adapters have quick connects in two sized for pumping oil in and out, allowing the system to remain closed at all times, dramatically reducing contamination while improving...

   
Flapper Valve Adapter for Extreme Duty Breather DC-XD-6

Flapper Valve Adapter for Extreme Duty Breather DC-XD-6

$82.92
P/N: DC-XDVA-16M

Des-Case Extreme Duty breathers remove moisture and particulate contamination before they enter your system, so your equipment runs clean and dry. Use of a vent valve adapter helps prevent oil mist and slosh from entering the breather, thereby extending the life of the product. A preventative maintenance...

SPECIFICATIONS
Unit Height 3.1 inch (7.9 cm), Diameter 2.3 inch (5.8 cm), Venting Airflow: 19 scfm @ 1 PSI, Connection Size : 1 inch NPT
   
DC-EX-4 Extended Series Breather (5.7" x 10")

DC-EX-4 Extended Series Breather (5.7" x 10")

$174.25
P/N: DC-EX-4

From the core standpipe to the tough polycarbonate exterior, every element of Des-Case fts disposable standard breather has been designed to stand up to the wide variety of industries and applications taking advantage of Des-Case fts contamination control expertise.Des-Case breathers attack the cause of...

SPECIFICATIONS
Unit Height 10 inch, Diameter 5.7 inch, Shipping Weight: 6.5 lb., Amount of Silica Gel: 4.2 lb., Adsorption Capacity: 27 fl oz, Max. Flow Rate (cfm): 24 cfm, Operating Temp. Range: -20°F to 200°F (-29°C to 93°C), Body Material: Nylon & Polycarbonate, Hydrophilic Agent: Silica Gel, Filter...
   
DC-EX-3 Extended Series Breather (5.7" x 8.2")

DC-EX-3 Extended Series Breather (5.7" x 8.2")

$158.50
P/N: DC-EX-3

From the core standpipe to the tough polycarbonate exterior, every element of Des-Case fts disposable standard breather has been designed to stand up to the wide variety of industries and applications taking advantage of Des-Case fts contamination control expertise.Des-Case breathers attack the cause of...

SPECIFICATIONS
Unit Height 8.2 inch, Diameter 5.7 inch, Shipping Weight: 5.5 lb., Amount of Silica Gel: 3.2 lb., Adsorption Capacity: 20.5 fl oz, Max. Flow Rate (cfm): 25 cfm, Operating Temp. Range: -20°F to 200°F (-29°C to 93°C), Body Material: Nylon & Polycarbonate, Hydrophilic Agent: Silica Gel,...
   
DC-EX-2 Extended Series Breather (5.7" x 6.4")

DC-EX-2 Extended Series Breather (5.7" x 6.4")

$142.75
P/N: DC-EX-2

From the core standpipe to the tough polycarbonate exterior, every element of Des-Case fts disposable standard breather has been designed to stand up to the wide variety of industries and applications taking advantage of Des-Case fts contamination control expertise.Des-Case breathers attack the cause of...

SPECIFICATIONS
Unit Height 6.4 inch, Diameter 5.7 inch, Shipping Weight: 4.1 lb., Amount of Silica Gel: 2.2 lb., Adsorption Capacity: 14.1 fl oz, Max. Flow Rate (cfm): 26 cfm, Operating Temp. Range: -20°F to 200°F (-29°C to 93°C), Body Material: Nylon & Polycarbonate, Hydrophilic Agent: Silica Gel,...
   
DC-EX-1 Extended Series Breather (5.7" x 4.7")

DC-EX-1 Extended Series Breather (5.7" x 4.7")

$127.00
P/N: DC-EX-1

From the core standpipe to the tough polycarbonate exterior, every element of Des-Case fts disposable standard breather has been designed to stand up to the wide variety of industries and applications taking advantage of Des-Case fts contamination control expertise.Des-Case breathers attack the cause of...

SPECIFICATIONS
Unit Height 4.7 inch, Diameter 5.7 inch, Shipping Weight: 3 lb., Amount of Silica Gel: 1.2 lb., Adsorption Capacity: 7.7 fl oz, Max. Flow Rate (cfm): 27 cfm, Operating Temp. Range: -20°F to 200°F (-29°C to 93°C), Body Material: Nylon & Polycarbonate, Hydrophilic Agent: Silica Gel, Filter...
   
DC-ND-2 Oil Coalescing Non-Desiccant Breather

DC-ND-2 Oil Coalescing Non-Desiccant Breather

$25.15
P/N: DC-ND-2

Industry spends millions of dollars annually treating the negative effects of contamination caused by wet, dirty air. Contaminated lubricating oil and hydraulic fluid results in excess machine wear, production downtime, and repair costs. Des-Case breathers attack the cause of contamination, allowing your...

SPECIFICATIONS
Unit Height 1.35 inch (3.43 cm), Diameter 1.80 inch (4.57 cm), Amount of Silica Gel: n/a, Adsorption Capacity: n/a, Max Flow Rate: 0.67 cfm @ 1 PSID, Filtration: 0.3µ (absolute), Operating Temp. Range: -40°F to 300°F (-40°C to 149°C), Hydrophilic Agent: n/a, Filter Media: Oleophobic...
   
DC-ND-35 Oil Coalescing Non-Desiccant Breather

DC-ND-35 Oil Coalescing Non-Desiccant Breather

$88.15
P/N: DC-ND-35

Industry spends millions of dollars annually treating the negative effects of contamination caused by wet, dirty air. Contaminated lubricating oil and hydraulic fluid results in excess machine wear, production downtime, and repair costs. Des-Case breathers attack the cause of contamination, allowing your...

SPECIFICATIONS
Unit Height 5 inch (12.7 cm), Diameter 5 inch (12.7 cm), Amount of Silica Gel: n/a, Adsorption Capacity: n/a, Max Flow Rate: 40 cfm @ 1 PSID, Filtration: 0.3µ (absolute), Operating Temp. Range: -40°F to 300°F (-40°C to 149°C), Hydrophilic Agent: n/a, Filter Media: Oleophobic Polyester,...
   
DC-VG-4 VentGuard Breather (Hybrid Breather)

DC-VG-4 VentGuard Breather (Hybrid Breather)

$121.75
P/N: DC-VG-4

More often than not, bearing failures and system shutdowns can be linked back to lubricant system contamination. And contamination can be linked to unprotected breather vents. That fts why Des-Case Corporation has tailored drying solutions specific to the pump market with its line of VentGuardTM desiccant...

SPECIFICATIONS
Unit Height 10.125 inch , Diameter 4 inch , Filtration: 3µ (absolute), Operating Temp. Range: -20°F to 200°F (-28.9°C to 93°C), Hydrophilic Agent: Silica Gel, Filter Media: Polyester, Connection Size: 1 inch NPT
   
DC-VG-3 VentGuard Breather (Hybrid Breather)

DC-VG-3 VentGuard Breather (Hybrid Breather)

$110.20
P/N: DC-VG-3

More often than not, bearing failures and system shutdowns can be linked back to lubricant system contamination. And contamination can be linked to unprotected breather vents. That fts why Des-Case Corporation has tailored drying solutions specific to the pump market with its line of VentGuardTM desiccant...

SPECIFICATIONS
Unit Height 8.125 inch (20.6 cm), Diameter 4 inch 10.2 cm), Amount of Silica Gel: 1.22 lb. (0.56 kg), Adsorption Capacity: 7.45 fl.oz. (220.3 ml), Max Flow Rate: 2.28 cfm @ 1 PSID, Filtration: 3µ (absolute), Operating Temp. Range: -20°F to 200°F (-28.9°C to 93°C), Hydrophilic Agent: Silica...
   
DC-VG-2 VentGuard Breather (Hybrid Breather)

DC-VG-2 VentGuard Breather (Hybrid Breather)

$98.65
P/N: DC-VG-2

More often than not, bearing failures and system shutdowns can be linked back to lubricant system contamination. And contamination can be linked to unprotected breather vents. That fts why Des-Case Corporation has tailored drying solutions specific to the pump market with its line of VentGuardTM desiccant...

SPECIFICATIONS
Unit Height 6. inch (15.6 cm), Diameter 4.1 inch 10.2 cm), Amount of Silica Gel: 0.66 lb. (0.30 kg), Adsorption Capacity: 4 fl.oz. (118.2 ml), Max Flow Rate: 2.44 cfm, Filtration: 3µ (absolute), Operating Temp. Range: -20°F to 200°F (-28.9°C to 93°C), Hydrophilic Agent: Silica Gel, Filter...
   
DC-VG-BB VentGuard Breather (Hybrid Breather)

DC-VG-BB VentGuard Breather (Hybrid Breather)

$55.60
P/N: DC-VG-BB

More often than not, bearing failures and system shutdowns can be linked back to lubricant system contamination. And contamination can be linked to unprotected breather vents. That fts why Des-Case Corporation has tailored drying solutions specific to the pump market with its line of VentGuardTM desiccant...

SPECIFICATIONS
Unit Height 3.9 inch, Diameter 2.52 inch, Amount of Silica Gel: 0.13 lb. (58.6 g), Adsorption Capacity: 0.8 fl.oz. (23 ml), Max Flow Rate: 1.45 cfm @ 1 PSID, Filtration: 3µ (absolute), Operating Temp. Range: -20°F to 200°F (-28.9°C to 93°C), Hydrophilic Agent: Silica Gel, Filter Media:...
   
DC-HG-1 HydroGuard Hybrid Breather

DC-HG-1 HydroGuard Hybrid Breather

$83.95
P/N: DC-HG-1

More often than not, bearing failures and system shutdowns can be linked back to lubricant system contamination. And contamination can be linked to unprotected breather vents. That fts why Des-Case Corporation has tailored drying solutions specific to the pump market with its line of VentGuardTM desiccant...

SPECIFICATIONS
Unit Height 7.2 inch (18.3 cm), Diameter 2.53 inch (6.5 cm), Amount of Silica Gel: 0.3 lb. (0.136 kg), Adsorption Capacity: 0.8 fl.oz. (29.6 ml), Max Flow Rate: 1 cfm @ 1.5 PSID, Filtration: 3µ (absolute), Operating Temp. Range: -20°F to 200°F (-28.9°C to 93°C), Hydrophilic Agent: Silica...
   
DC-XD-6 Extreme Duty Breather

DC-XD-6 Extreme Duty Breather

$161.65
P/N: DC-XD-6

Every element of Des-Case fts Extreme Duty Disposable Breathers has been designed to take contamination control to a whole new level, standing up to a wide variety of applications in challenging environments. Des-Case extreme-duty breathers attack the cause of contamination, keeping dirt and water where it...

SPECIFICATIONS
Unit Height 6.51 inch (16.54 cm), Diameter 5.1 inch (12.95 cm), Amount of Silica Gel: 1 lb. 12 oz. (790 g), Adsorption Capacity: 10.72 fl.oz. (315 ml), Connection Size: 1-1/2 inch x 16 Straight Thread, Max. Flow Rate (cfm): 20 @ 1 PSID, Operating Temp. Range: -40°F to 300°F (-40°C to 149°C),...
   
Flapper Valve Adapter for Extreme Duty Breather DC-XD-6

Flapper Valve Adapter for Extreme Duty Breather DC-XD-6

$82.92
P/N: DC-XDVA-12M

Des-Case Extreme Duty breathers remove moisture and particulate contamination before they enter your system, so your equipment runs clean and dry. Use of a vent valve adapter helps prevent oil mist and slosh from entering the breather, thereby extending the life of the product. A preventative maintenance...

SPECIFICATIONS
Unit Height 3.1 inch (7.9 cm), Diameter 2.3 inch (5.8 cm), Venting Airflow: 19 scfm @ 1 PSI, Connection Size : 3/4 inch NPT
   
1/8" Vacuum Indicator for DC-SB

1/8" Vacuum Indicator for DC-SB

$29.72
P/N: DC-SB-VI

Connects DoublePlayTM and TriplePlayTM to 1 inch female threaded connection with single-position vacuum indicator.

   
Rebuildable Steel Breather - 200 lbs.

Rebuildable Steel Breather - 200 lbs.

$5,348.95
P/N: DC-RS-200

Resilient construction provides durability and allows oil mist to coalesce and drain back into a reservoir. Replaceable polyethylene microglass filter prevents particles to 1-micron absolute from entering the system. Easy-to-replace desiccant bags remove moisture from incoming air, extending fluid and system...

SPECIFICATIONS
Unit Height 42.75 inch (108.6 cm), Diameter 23.5 inch (59.69 cm), Connection Size: 4 inch NPT, Amount of Desiccant: 200 lb. (90.72 kg), Flow Rate at 0.5 PSID: 240, Approx. Dry Weight: 315 lb. (142.88 kg), Adsorption Capacity: 36.0 L (9.51 gal), Operating Temp. Range: -20°F to 220°F (-29°C to...
   
Rebuildable Steel Breather - 150 lbs.

Rebuildable Steel Breather - 150 lbs.

$4,443.95
P/N: DC-RS-150

Resilient construction provides durability and allows oil mist to coalesce and drain back into a reservoir. Replaceable polyethylene microglass filter prevents particles to 1-micron absolute from entering the system. Easy-to-replace desiccant bags remove moisture from incoming air, extending fluid and system...

SPECIFICATIONS
Unit Height 36.75 inch (93.3 cm), Diameter 23.5 inch (59.69 cm), Connection Size: 4 inch NPT, Amount of Desiccant: 150 lb. (68.04 kg), Flow Rate at 0.5 PSID: 250, Approx. Dry Weight: 253 lb. (114.76 kg), Adsorption Capacity: 27.0 L (7.13 gal), Operating Temp. Range: -20°F to 220°F (-29°C to...
   
Rebuildable Steel Breather - 100 lbs.

Rebuildable Steel Breather - 100 lbs.

$3,332.95
P/N: DC-RS-100

Resilient construction provides durability and allows oil mist to coalesce and drain back into a reservoir. Replaceable polyethylene microglass filter prevents particles to 1-micron absolute from entering the system. Easy-to-replace desiccant bags remove moisture from incoming air, extending fluid and system...

SPECIFICATIONS
Unit Height 31 inch (78.7 cm), Diameter 23.5 inch (59.69 cm), Connection Size: 4 inch NPT, Amount of Desiccant: 100 lb. (45.36 kg), Flow Rate at 0.5 PSID: 270, Approx. Dry Weight: 190 lb. (86.18 kg), Adsorption Capacity: 18.0 L (4.75 gal), Operating Temp. Range: -20°F to 220°F (-29°C to...
   
Rebuildable Steel Breather - 75 lbs.

Rebuildable Steel Breather - 75 lbs.

$2,524.95
P/N: DC-RS-75

Resilient construction provides durability and allows oil mist to coalesce and drain back into a reservoir. Replaceable polyethylene microglass filter prevents particles to 1-micron absolute from entering the system. Easy-to-replace desiccant bags remove moisture from incoming air, extending fluid and system...

SPECIFICATIONS
Unit Height 39.75 inch (101 cm), Diameter 15.5 inch (39.37 cm), Connection Size: 3 inch NPT, Amount of Desiccant: 75 lb. (34.02 kg), Flow Rate at 0.5 PSID: 80, Approx. Dry Weight: 144 lb. (65.32 kg), Adsorption Capacity: 13.5 L (3.57 gal), Operating Temp. Range: -20°F to 220°F (-29°C to...
   
Rebuildable Steel Breather - 50 lbs.

Rebuildable Steel Breather - 50 lbs.

$2,019.95
P/N: DC-RS-50

Resilient construction provides durability and allows oil mist to coalesce and drain back into a reservoir. Replaceable polyethylene microglass filter prevents particles to 1-micron absolute from entering the system. Easy-to-replace desiccant bags remove moisture from incoming air, extending fluid and system...

SPECIFICATIONS
Unit Height 31.25 inch (79.4 cm), Diameter 15.5 inch (39.37 cm), Connection Size: 3 inch NPT, Amount of Desiccant: 50 lb. (22.68 kg), Flow Rate at 0.5 PSID: 115, Approx. Dry Weight: 100 lb. (45.36 kg), Adsorption Capacity: 9.0 L (2.38 gal), Operating Temp. Range: -20°F to 220°F (-29°C to...
   
Rebuildable Steel Breather - 25 lbs.

Rebuildable Steel Breather - 25 lbs.

$1,615.95
P/N: DC-RS-25

Resilient construction provides durability and allows oil mist to coalesce and drain back into a reservoir. Replaceable polyethylene microglass filter prevents particles to 1-micron absolute from entering the system. Easy-to-replace desiccant bags remove moisture from incoming air, extending fluid and system...

SPECIFICATIONS
Unit Height 22.5 inch (57.1 cm), Diameter 15.5 inch (39.37 cm), Connection Size: 3 inch NPT, Amount of Desiccant: 25 lb. (11.34 kg), Flow Rate at 0.5 PSID: 140, Approx. Dry Weight: 64 lb. (29.03 kg), Adsorption Capacity: 4.5 L (1.19 gal), Operating Temp. Range: -20°F to 220°F (-29°C to...
   
Rebuildable Steel Breather - 15 lbs.

Rebuildable Steel Breather - 15 lbs.

$1,312.95
P/N: DC-RS-15

Resilient construction provides durability and allows oil mist to coalesce and drain back into a reservoir. Replaceable polyethylene microglass filter prevents particles to 1-micron absolute from entering the system. Easy-to-replace desiccant bags remove moisture from incoming air, extending fluid and system...

SPECIFICATIONS
Unit Height 19.25 inch (48.9 cm), Diameter 15.5 inch (39.37 cm), Connection Size: 3 inch NPT, Amount of Desiccant: 15 lb. (6.80 kg), Flow Rate at 0.5 PSID: 205, Approx. Dry Weight: 49 lb. (22.23 kg), Adsorption Capacity: 2.7 L (0.71 gal), Operating Temp. Range: -20°F to 220°F (-29°C to...
   
Rebuildable Steel Breather - 9 lbs.

Rebuildable Steel Breather - 9 lbs.

$1,211.95
P/N: DC-RS-9

Resilient construction provides durability and allows oil mist to coalesce and drain back into a reservoir. Replaceable polyethylene microglass filter prevents particles to 1-micron absolute from entering the system. Easy-to-replace desiccant bags remove moisture from incoming air, extending fluid and system...

SPECIFICATIONS
Unit Height 18.25 inch (46.4 cm), Diameter 10.13 inch (25.72 cm), Connection Size: 2 inch NPT, Amount of Desiccant: 9 lb. (4.08 kg), Flow Rate at 0.5 PSID: 80, Approx. Dry Weight: 27 lb. (12.25 kg), Adsorption Capacity: 1.62 L (0.43 gal), Operating Temp. Range: -20°F to 220°F (-29°C to...
   
Rebuildable Steel Breather - 5 lbs.

Rebuildable Steel Breather - 5 lbs.

$1,009.95
P/N: DC-RS-5

Resilient construction provides durability and allows oil mist to coalesce and drain back into a reservoir. Replaceable polyethylene microglass filter prevents particles to 1-micron absolute from entering the system. Easy-to-replace desiccant bags remove moisture from incoming air, extending fluid and system...

SPECIFICATIONS
Unit Height 13.75 inch (34.9 cm), Diameter 10.13 inch (25.72 cm), Connection Size: 2 inch NPT, Amount of Desiccant: 5 lb. (2.27 kg), Flow Rate at 0.5 PSID: 85, Approx. Dry Weight: 20 lb. (9.07 kg), Adsorption Capacity: 0.90 L (0.24 gal), Operating Temp. Range: -20°F to 220°F (-29°C to 104°C)
   
Rebuildable Steel Breather - 3 lbs.

Rebuildable Steel Breather - 3 lbs.

$838.25
P/N: DC-RS-3

Resilient construction provides durability and allows oil mist to coalesce and drain back into a reservoir. Replaceable polyethylene microglass filter prevents particles to 1-micron absolute from entering the system. Easy-to-replace desiccant bags remove moisture from incoming air, extending fluid and system...

SPECIFICATIONS
Unit Height 11.5 inch (29.2 cm), Diameter 10.13 inch (25.72 cm), Connection Size: 2 inch NPT, Amount of Desiccant: 3 lb. (1.36 kg), Flow Rate at 0.5 PSID: 85, Approx. Dry Weight: 16 lb. (7.26 kg), Adsorption Capacity: 0.54 L (0.14 gal), Operating Temp. Range: -20°F to 220°F (-29°C to 104°C)
   
DC-VG-1 VentGuard Breather

DC-VG-1 VentGuard Breather

$66.09
P/N: DC-VG-1

More often than not, bearing failures and system shutdowns can be linked back to lubricant system contamination. And contamination can be linked to unprotected breather vents. That fts why Des-Case Corporation has tailored drying solutions specific to the pump market with its line of VentGuardTM desiccant...

SPECIFICATIONS
Unit Height 5.35 inch (13.5 cm), Diameter 2.52 inch (6.4 cm), Amount of Silica Gel: 0.3 lb. (0.136 kg), Adsorption Capacity: 1.68 fl.oz. (50 ml), Max Flow Rate: 1.45 cfm, Filtration: 3µ (absolute), Operating Temp. Range: -20°F to 200°F (-28.9°C to 93°C), Hydrophilic Agent: Silica Gel,...
   
DC-HG-8 HydroGuard Hybrid Breather

DC-HG-8 HydroGuard Hybrid Breather

$125.95
P/N: DC-HG-8

From the expansion chamber system to the check valves, every element of Des-Case fts patented HydroguardTM breather has been designed to stand up to a wide variety of industries and applications taking advantage of Des-Case fts contamination control expertise. HydroguardTM breathers by Des-Case attack the...

SPECIFICATIONS
Unit Height: 9.75 inch ( 24.76 cm), Diameter: 4.1 inch ( 10.41 cm ), Amount of Silica Gel: 10.4 oz. ( 240 g ), Adsorption Capacity: 4.05 fl.oz. (120 ml), Max. Flow Rate: 2.5 cfm @ 1 PSID, Filtration: 3µ (absolute), Operating Temp. Range: -20°F to 200°F ( -28.9°C to 93°C ), Hydrophilic...
   
DC-3 Breather (4" x 7")

DC-3 Breather (4" x 7")

$77.65
P/N: DC-3

From the core standpipe to the tough polycarbonate exterior, every element of Des-Case fts disposable standard breather has been designed to stand up to the wide variety of industries and applications taking advantage of Des-Case fts contamination control expertise.Des-Case breathers attack the cause of...

SPECIFICATIONS
Unit Height 8 inch (20.6 cm), Diameter 4 inch (10.2 cm), Shipping Weight: 1 lb. 12 oz., Amount of Silica Gel: 1 lb. 4 oz. (0.56 kg), Adsorption Capacity: 7.45 fl oz (220ml), Max. Flow Rate (cfm): 16, Operating Temp. Range: -20°F to 200°F (-29°C to 93°C), Body Material: Nylon & Polycarbonate,...
   
DC-1 Breather (2.75" X 5.25")

DC-1 Breather (2.75" X 5.25")

$45.10
P/N: DC-1

From the core standpipe to the tough polycarbonate exterior, every element of Des-Case fts disposable standard breather has been designed to stand up to the wide variety of industries and applications taking advantage of Des-Case fts contamination control expertise.Des-Case breathers attack the cause of...

SPECIFICATIONS
Unit Height 5.35 inch (13.5 cm), Diameter 2.5 inch (6.4 cm), Amount of Silica Gel: 4 oz. (113 g), Adsorption Capacity: 4 fl.oz. ( 50 ml ), Max. Flow Rate (cfm): 4.16, Filtration: 3µ (absolute), Operating Temp. Range: -20°F to 200°F (-29°C to 93°C), Hydrophilic Agent: Silica Gel, Filter...
   
DC-BB Button Breather (2.75" X 3.25")

DC-BB Button Breather (2.75" X 3.25")

$34.60
P/N: DC-BB

From the core standpipe to the tough polycarbonate exterior, every element of Des-Case fts disposable standard breather has been designed to stand up to the wide variety of industries and applications taking advantage of Des-Case fts contamination control expertise.Des-Case breathers attack the cause of...

SPECIFICATIONS
Unit Height 3.9 inch (9.9 cm), Diameter 2.5 inch (6.4 cm), Amount of Silica Gel: 2 oz. (57 g), Adsorption Capacity: 0.8 fl.oz. ( 23 ml ), Max. Flow Rate (cfm): 3 @ 1 PSID, Filtration: 3µ (absolute), Operating Temp. Range: -20°F to 200°F (-29°C to 93°C), Hydrophilic Agent: Silica Gel,...
   
DC-4 Breather (4" x 9")

DC-4 Breather (4" x 9")

$88.15
P/N: DC-4

From the core standpipe to the tough polycarbonate exterior, every element of Des-Case fts disposable standard breather has been designed to stand up to the wide variety of industries and applications taking advantage of Des-Case fts contamination control expertise.Des-Case breathers attack the cause of...

SPECIFICATIONS
Unit Height 10 inch (25.7 cm), Diameter 4 inch (10.2 cm), Shipping Weight: 2 lb. 7 oz., Amount of Silica Gel: 1 lb. 14 oz. (0.85 kg), Adsorption Capacity: 11.3 fl oz (353ml), Max. Flow Rate (cfm): 16, Operating Temp. Range: -20°F to 200°F (-29°C to 93°C), Body Material: Nylon &...
   
3 micron Spin-on air breather (3/4" MNPT)

3 micron Spin-on air breather (3/4" MNPT)

$70.75
P/N: AB03F34


SPECIFICATIONS
Micron Rating: 3 micron, Oil / Tank connection: 3/4 inch NPT, Adaptor Material: Steel, Air flow rate: 18 cfm (0.51 m3/m), Air displacement: 135 gpm (511 lpm)
   
3 micron air breather

3 micron air breather

$32.43
P/N: AB03M34


SPECIFICATIONS
Breather Cap: Steel, chrome plated, Socket: Steel, chrome plated, Air filter insert: 3 micron paper, Oil / Tank connection: 3/4 inch NPT, Air flow rate: 0.45 m3/min
   
DC-2 Breather (4" x 5")

DC-2 Breather (4" x 5")

$67.15
P/N: DC-2

From the core standpipe to the tough polycarbonate exterior, every element of Des-Case fts disposable standard breather has been designed to stand up to the wide variety of industries and applications taking advantage of Des-Case fts contamination control expertise.Des-Case breathers attack the cause of...

SPECIFICATIONS
Unit Height 6 inch (15.6 cm), Diameter 4 inch (10.2 cm), Shipping Weight: 1 lb. 3 oz., Amount of Silica Gel: 11 oz. (0.31 kg), Adsorption Capacity: 4 fl oz (118 ml), Max. Flow Rate (cfm): 16, Operating Temp. Range: -20°F to 200°F (-29°C to 93°C), Body Material: Nylon & Polycarbonate,...