Email Us

  info.sales@lubrigard.com

DES-CASE VISUAL INDICATORS / SIGHT GLASS

SHOP BY

  • Filter By Sub Category
  • MANUFACTURER
    Des-Case
 Reset Filters
 
  •  
  •  
per page
  • 3-D BullsEye - 1" NPT
    3-D BullsEye - 1" NPT

    3-D BullsEye - 1" NPT

    $37.39
    P/N: DC-3DB1000

    The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

    SPECIFICATIONS
    Thread Sizes: 1 inch NPT, Outside Diameter: 1.375 inch, Length from last Thread: 1.375 inch, (picture shown is a standard unit), Sizes 1/2 inch NPT and above are a solid piece of cast arcylic with male threads, Sizes 1/4 inch and 3/8 inch NPT come with female threads and brass nipples included,...
       
    3-D Bullseye sight plugs
    P/N: DC-3DB1000

    $37.39 
       
  • 3-D BullsEye - 3/4" NPT
    3-D BullsEye - 3/4" NPT

    3-D BullsEye - 3/4" NPT

    $33.54
    P/N: DC-3DB0750

    The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

    SPECIFICATIONS
    Thread Sizes: 3/4 inch NPT, (picture shown is a standard unit), Sizes 1/2 inch NPT and above are a solid piece of cast arcylic with male threads, Sizes 1/4 inch and 3/8 inch NPT come with female threads and brass nipples included, All metric sizes come with female threads and brass nipple and gasket...
       
    3-D Bullseye sight plugs
    P/N: DC-3DB0750

    $33.54 
       
  • 3-D BullsEye - 1/4" NPT
    3-D BullsEye - 1/4" NPT

    3-D BullsEye - 1/4" NPT

    $29.38
    P/N: DC-3DB0250

    The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

    SPECIFICATIONS
    Thread Sizes: 1/4 inch NPT, (picture shown is a standard unit), Sizes 1/2 inch NPT and above are a solid piece of cast arcylic with male threads, Sizes 1/4 inch and 3/8 inch NPT come with female threads and brass nipples included, All metric sizes come with female threads and brass nipple and gasket...
       
    3-D Bullseye sight plugs
    P/N: DC-3DB0250

    $29.38 
       
  • 3-D BullsEye - 3/8" NPT
    3-D BullsEye - 3/8" NPT

    3-D BullsEye - 3/8" NPT

    $31.56
    P/N: DC-3DB0375

    The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

    SPECIFICATIONS
    Thread Sizes: 3/8 inch NPT, (picture shown is a standard unit), Sizes 1/2 inch NPT and above are a solid piece of cast arcylic with male threads, Sizes 1/4 inch and 3/8 inch NPT come with female threads and brass nipples included, All metric sizes come with female threads and brass nipple and gasket...
       
    3-D Bullseye sight plugs
    P/N: DC-3DB0375

    $31.56 
       
  • 3-D BullsEye - 1/2" NPT
    3-D BullsEye - 1/2" NPT

    3-D BullsEye - 1/2" NPT

    $32.30
    P/N: DC-3DB0500

    The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

    SPECIFICATIONS
    Thread Sizes: 1/2 inch NPT, (picture shown is a standard unit), Sizes 1/2 inch NPT and above are a solid piece of cast arcylic with male threads, Sizes 1/4 inch and 3/8 inch NPT come with female threads and brass nipples included, All metric sizes come with female threads and brass nipple and gasket...
       
    3-D Bullseye sight plugs
    P/N: DC-3DB0500

    $32.30 
       
  • 3-D BullsEye - 1.25" NPT
    3-D BullsEye - 1.25" NPT

    3-D BullsEye - 1.25" NPT

    $43.38
    P/N: DC-3DB1250

    The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

    SPECIFICATIONS
    Thread Sizes: 1.25 inch NPT, (picture shown is a standard unit), Sizes 1/2 inch NPT and above are a solid piece of cast arcylic with male threads, Sizes 1/4 inch and 3/8 inch NPT come with female threads and brass nipples included, All metric sizes come with female threads and brass nipple and gasket...
       
    3-D Bullseye sight plugs
    P/N: DC-3DB1250

    $43.38 
       
  • 3-D BullsEye - 1.50" NPT
    3-D BullsEye - 1.50" NPT

    3-D BullsEye - 1.50" NPT

    $53.12
    P/N: DC-3DB1500

    The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

    SPECIFICATIONS
    Thread Sizes: 1.50 inch NPT, (picture shown is a standard unit), Sizes 1/2 inch NPT and above are a solid piece of cast arcylic with male threads, Sizes 1/4 inch and 3/8 inch NPT come with female threads and brass nipples included, All metric sizes come with female threads and brass nipple and gasket...
       
    3-D Bullseye sight plugs
    P/N: DC-3DB1500

    $53.12 
       
  • 3-D BullsEye - 2" NPT
    3-D BullsEye - 2" NPT

    3-D BullsEye - 2" NPT

    $62.52
    P/N: DC-3DB2000

    The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

    SPECIFICATIONS
    Thread Sizes: 2 inch NPT, (picture shown is a standard unit), Sizes 1/2 inch NPT and above are a solid piece of cast arcylic with male threads, Sizes 1/4 inch and 3/8 inch NPT come with female threads and brass nipples included, All metric sizes come with female threads and brass nipple and gasket...
       
    3-D Bullseye sight plugs
    P/N: DC-3DB2000

    $62.52 
       
  • Oil Level Indicator 18"
    Oil Level Indicator 18"

    Oil Level Indicator 18"

    $155.35
    P/N: DC-OLI18

    The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to gauge the oil level inside large tanks, gearboxes and reservoirs. The OLI is a clear acrylic column with 1/2 inch NPT threads at each end. Red and green level marker stickers are included with the OLI to mark...

    SPECIFICATIONS
    Material:, Stain-resistant acrylic, Brass fittings standard (15 inch and above), Recommended Temperature Range:, -40F to 200F, -40C to 93C, Maximum Operating Pressure:, 65 psi, 4.48 bar, Chemical Compatibility:, All gear, mineral and synthetic oils, Available Options:, Lengths ranging...
       
    Monitor the oil level in your machine machinery.
    P/N: DC-OLI18

    $155.35 
       
  • Oil Level Indicator 9"
    Oil Level Indicator 9"

    Oil Level Indicator 9"

    $51.90
    P/N: DC-OLI9

    The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to gauge the oil level inside large tanks, gearboxes and reservoirs. The OLI is a clear acrylic column with 1/2 inch NPT threads at each end. Red and green level marker stickers are included with the OLI to mark...

    SPECIFICATIONS
    Material:, Stain-resistant acrylic, Brass fittings standard (15 inch and above), Recommended Temperature Range:, -40F to 200F, -40C to 93C, Maximum Operating Pressure:, 65 psi, 4.48 bar, Chemical Compatibility:, All gear, mineral and synthetic oils, Available Options:, Lengths ranging...
       
    Monitor the oil level in your machine machinery.
    P/N: DC-OLI9

    $51.90 
       
  • 3-D BullsEye Metric 10X1.0
    3-D BullsEye Metric 10X1.0

    3-D BullsEye Metric 10X1.0

    $28.68
    P/N: DC-3DBM10X1.0

    The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

    SPECIFICATIONS
    3-D BullsEye Metric 10X1.0
       
    3-D Bullseye sight plugs
    P/N: DC-3DBM10X1.0

    $28.68 
       
  • 3-D BullsEye Metric 10X1.5
    3-D BullsEye Metric 10X1.5

    3-D BullsEye Metric 10X1.5

    $29.04
    P/N: DC-3DBM10X1.5

    The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

    SPECIFICATIONS
    3-D BullsEye Metric 10X1.5
       
    3-D Bullseye sight plugs
    P/N: DC-3DBM10X1.5

    $29.04 
       
  • 3-D BullsEye Metric 12X1.5
    3-D BullsEye Metric 12X1.5

    3-D BullsEye Metric 12X1.5

    $29.41
    P/N: DC-3DBM12X1.5

    The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

    SPECIFICATIONS
    3-D BullsEye Metric 12X1.5
       
    3-D Bullseye sight plugs
    P/N: DC-3DBM12X1.5

    $29.41 
       
  • 3-D BullsEye Metric 16X1.5
    3-D BullsEye Metric 16X1.5

    3-D BullsEye Metric 16X1.5

    $28.56
    P/N: DC-3DBM16x1.5

    The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

    SPECIFICATIONS
    3-D BullsEye Metric 16X1.5
       
    3-D Bullseye sight plugs
    P/N: DC-3DBM16x1.5

    $28.56 
       
  • 3-D BullsEye Metric 20X1.5
    3-D BullsEye Metric 20X1.5

    3-D BullsEye Metric 20X1.5

    $32.19
    P/N: DC-3DBM20X1.5

    The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

    SPECIFICATIONS
    3-D BullsEye Metric 20X1.5
       
    3-D Bullseye sight plugs
    P/N: DC-3DBM20X1.5

    $32.19 
       
  • 3-D BullsEye Metric 22X1.5
    3-D BullsEye Metric 22X1.5

    3-D BullsEye Metric 22X1.5

    $32.19
    P/N: DC-3DBM22X1.5

    The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

    SPECIFICATIONS
    3-D BullsEye Metric 22X1.5
       
    3-D Bullseye sight plugs
    P/N: DC-3DBM22X1.5

    $32.19 
       
  • 3-D BullsEye Metric 24X1.5
    3-D BullsEye Metric 24X1.5

    3-D BullsEye Metric 24X1.5

    $36.66
    P/N: DC-3DBM24X1.5

    The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

    SPECIFICATIONS
    3-D BullsEye Metric 24X1.5
       
    3-D Bullseye sight plugs
    P/N: DC-3DBM24X1.5

    $36.66 
       
  • 3-D BullsEye Metric 26X1.5
    3-D BullsEye Metric 26X1.5

    3-D BullsEye Metric 26X1.5

    $37.51
    P/N: DC-3DBM26X1.5

    The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

    SPECIFICATIONS
    3-D BullsEye Metric 26X1.5
       
    3-D Bullseye sight plugs
    P/N: DC-3DBM26X1.5

    $37.51 
       
  • 3-D BullsEye Metric 27X1.5
    3-D BullsEye Metric 27X1.5

    3-D BullsEye Metric 27X1.5

    $38.41
    P/N: DC-3DBM27X1.5

    The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

    SPECIFICATIONS
    3-D BullsEye Metric 27X1.5
       
    3-D Bullseye sight plugs
    P/N: DC-3DBM27X1.5

    $38.41 
       
  • 3-D BullsEye Metric 30X1.5
    3-D BullsEye Metric 30X1.5

    3-D BullsEye Metric 30X1.5

    $40.10
    P/N: DC-3DBM30X1.5

    The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

    SPECIFICATIONS
    3-D BullsEye Metric 30X1.5
       
    3-D Bullseye sight plugs
    P/N: DC-3DBM30X1.5

    $40.10 
       
  • 3-D BullsEye Metric 30X2.0
    3-D BullsEye Metric 30X2.0

    3-D BullsEye Metric 30X2.0

    $40.10
    P/N: DC-3DBM30X2.0

    The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

    SPECIFICATIONS
    3-D BullsEye Metric 30X2.0
       
    3-D Bullseye sight plugs
    P/N: DC-3DBM30X2.0

    $40.10 
       
  • 3-D BullsEye Metric 33X1.5
    3-D BullsEye Metric 33X1.5

    3-D BullsEye Metric 33X1.5

    $42.70
    P/N: DC-3DBM33X1.5

    The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

    SPECIFICATIONS
    3-D BullsEye Metric 33X1.5
       
    3-D Bullseye sight plugs
    P/N: DC-3DBM33X1.5

    $42.70 
       
  • Oil Level Indicator 6"
    Oil Level Indicator 6"

    Oil Level Indicator 6"

    $46.15
    P/N: DC-OLI6

    The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to gauge the oil level inside large tanks, gearboxes and reservoirs. The OLI is a clear acrylic column with 1/2 inch NPT threads at each end. Red and green level marker stickers are included with the OLI to mark...

    SPECIFICATIONS
    Material:, Stain-resistant acrylic, Brass fittings standard (15 inch and above), Recommended Temperature Range:, -40F to 200F, -40C to 93C, Maximum Operating Pressure:, 65 psi, 4.48 bar, Chemical Compatibility:, All gear, mineral and synthetic oils, Available Options:, Lengths ranging...
       
    Monitor the oil level in your machine machinery.
    P/N: DC-OLI6

    $46.15 
       
  • Oil Level Indicator 15"
    Oil Level Indicator 15"

    Oil Level Indicator 15"

    $132.07
    P/N: DC-OLI-15

    The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to gauge the oil level inside large tanks, gearboxes and reservoirs. The OLI is a clear acrylic column with 1/2 inch NPT threads at each end. Red and green level marker stickers are included with the OLI to mark...

    SPECIFICATIONS
    Material:, Stain-resistant acrylic, Brass fittings standard (15 inch and above), Recommended Temperature Range:, -40F to 200F, -40C to 93C, Maximum Operating Pressure:, 65 psi, 4.48 bar, Chemical Compatibility:, All gear, mineral and synthetic oils, Available Options:, Lengths ranging...
       
    Monitor the oil level in your machine machinery.
    P/N: DC-OLI-15

    $132.07 
       
  • Oil Level Indicator 3"
    Oil Level Indicator 3"

    Oil Level Indicator 3"

    $41.00
    P/N: DC-OLI3

    The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to gauge the oil level inside large tanks, gearboxes and reservoirs. The OLI is a clear acrylic column with 1/2 inch NPT threads at each end. Red and green level marker stickers are included with the OLI to mark...

    SPECIFICATIONS
    Material:, Stain-resistant acrylic, Brass fittings standard (15 inch and above), Recommended Temperature Range:, -40F to 200F, -40C to 93C, Maximum Operating Pressure:, 65 psi, 4.48 bar, Chemical Compatibility:, All gear, mineral and synthetic oils, Available Options:, Lengths ranging...
       
    Monitor the oil level in your machine machinery.
    P/N: DC-OLI3

    $41.00 
       
  • 3-D BullsEye 1/2" BSPP
    3-D BullsEye 1/2" BSPP

    3-D BullsEye 1/2" BSPP

    $32.95
    P/N: DC-3DBBSPP0500

    The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

    SPECIFICATIONS
    3-D BullsEye 1/2 inch BSPP
       
    3-D Bullseye sight plugs
    P/N: DC-3DBBSPP0500

    $32.95 
       
  • 3-D BullsEye 3/4" BSPP
    3-D BullsEye 3/4" BSPP

    3-D BullsEye 3/4" BSPP

    $35.11
    P/N: DC-3DBBSPP0750

    The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

    SPECIFICATIONS
    3-D BullsEye 1/2 inch BSPP
       
    3-D Bullseye sight plugs
    P/N: DC-3DBBSPP0750

    $35.11 
       
  • 3-D BullsEye 1" BSPP
    3-D BullsEye 1" BSPP

    3-D BullsEye 1" BSPP

    $36.98
    P/N: DC-3DBBSPP1000

    The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

    SPECIFICATIONS
    3-D BullsEye 1/2 inch BSPP
       
    3-D Bullseye sight plugs
    P/N: DC-3DBBSPP1000

    $36.98 
       
  • 3-D BullsEye 1-1/2" BSPP
    3-D BullsEye 1-1/2" BSPP

    3-D BullsEye 1-1/2" BSPP

    $45.33
    P/N: DC-3DBBSPP1500

    The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

    SPECIFICATIONS
    3-D BullsEye 1-1/2 inch BSPP
       
    3-D Bullseye sight plugs
    P/N: DC-3DBBSPP1500

    $45.33 
       
  • Oil Level Indicator 21"
    Oil Level Indicator 21"

    Oil Level Indicator 21"

    $173.38
    P/N: DC-OLI21

    The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to gauge the oil level inside large tanks, gearboxes and reservoirs. The OLI is a clear acrylic column with 1/2 inch NPT threads at each end. Red and green level marker stickers are included with the OLI to mark...

    SPECIFICATIONS
    Material:, Stain-resistant acrylic, Brass fittings standard (15 inch and above), Recommended Temperature Range:, -40F to 200F, -40C to 93C, Maximum Operating Pressure:, 65 psi, 4.48 bar, Chemical Compatibility:, All gear, mineral and synthetic oils, Available Options:, Lengths ranging...
       
    Monitor the oil level in your machine machinery.
    P/N: DC-OLI21

    $173.38 
       
  • Oil Level Indicator 24"
    Oil Level Indicator 24"

    Oil Level Indicator 24"

    $197.91
    P/N: DC-OLI24

    The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to gauge the oil level inside large tanks, gearboxes and reservoirs. The OLI is a clear acrylic column with 1/2 inch NPT threads at each end. Red and green level marker stickers are included with the OLI to mark...

    SPECIFICATIONS
    Material:, Stain-resistant acrylic, Brass fittings standard (15 inch and above), Recommended Temperature Range:, -40F to 200F, -40C to 93C, Maximum Operating Pressure:, 65 psi, 4.48 bar, Chemical Compatibility:, All gear, mineral and synthetic oils, Available Options:, Lengths ranging...
       
    OSG and Level Monitor 24 inch
    P/N: DC-OLI24

    $197.91 
       
  • Oil Level Indicator 27"
    Oil Level Indicator 27"

    Oil Level Indicator 27"

    $222.45
    P/N: DC-OLI27

    The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to gauge the oil level inside large tanks, gearboxes and reservoirs. The OLI is a clear acrylic column with 1/2 inch NPT threads at each end. Red and green level marker stickers are included with the OLI to mark...

    SPECIFICATIONS
    Material:, Stain-resistant acrylic, Brass fittings standard (15 inch and above), Recommended Temperature Range:, -40F to 200F, -40C to 93C, Maximum Operating Pressure:, 65 psi, 4.48 bar, Chemical Compatibility:, All gear, mineral and synthetic oils, Available Options:, Lengths ranging...
       
    OSG and Level Monitor 27 inch
    P/N: DC-OLI27

    $222.45 
       
  • Oil Level Indicator 30"
    Oil Level Indicator 30"

    Oil Level Indicator 30"

    $254.51
    P/N: DC-OLI30

    The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to gauge the oil level inside large tanks, gearboxes and reservoirs. The OLI is a clear acrylic column with 1/2 inch NPT threads at each end. Red and green level marker stickers are included with the OLI to mark...

    SPECIFICATIONS
    Material:, Stain-resistant acrylic, Brass fittings standard (15 inch and above), Recommended Temperature Range:, -40F to 200F, -40C to 93C, Maximum Operating Pressure:, 65 psi, 4.48 bar, Chemical Compatibility:, All gear, mineral and synthetic oils, Available Options:, Lengths ranging...
       
    OSG and Level Monitor 30 inch
    P/N: DC-OLI30

    $254.51 
       
 
  •  
  •  
3-D BullsEye - 1" NPT

3-D BullsEye - 1" NPT

$37.39
P/N: DC-3DB1000

The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

SPECIFICATIONS
Thread Sizes: 1 inch NPT, Outside Diameter: 1.375 inch, Length from last Thread: 1.375 inch, (picture shown is a standard unit), Sizes 1/2 inch NPT and above are a solid piece of cast arcylic with male threads, Sizes 1/4 inch and 3/8 inch NPT come with female threads and brass nipples included,...
   
3-D BullsEye - 3/4" NPT

3-D BullsEye - 3/4" NPT

$33.54
P/N: DC-3DB0750

The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

SPECIFICATIONS
Thread Sizes: 3/4 inch NPT, (picture shown is a standard unit), Sizes 1/2 inch NPT and above are a solid piece of cast arcylic with male threads, Sizes 1/4 inch and 3/8 inch NPT come with female threads and brass nipples included, All metric sizes come with female threads and brass nipple and gasket...
   
3-D BullsEye - 1/4" NPT

3-D BullsEye - 1/4" NPT

$29.38
P/N: DC-3DB0250

The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

SPECIFICATIONS
Thread Sizes: 1/4 inch NPT, (picture shown is a standard unit), Sizes 1/2 inch NPT and above are a solid piece of cast arcylic with male threads, Sizes 1/4 inch and 3/8 inch NPT come with female threads and brass nipples included, All metric sizes come with female threads and brass nipple and gasket...
   
3-D BullsEye - 3/8" NPT

3-D BullsEye - 3/8" NPT

$31.56
P/N: DC-3DB0375

The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

SPECIFICATIONS
Thread Sizes: 3/8 inch NPT, (picture shown is a standard unit), Sizes 1/2 inch NPT and above are a solid piece of cast arcylic with male threads, Sizes 1/4 inch and 3/8 inch NPT come with female threads and brass nipples included, All metric sizes come with female threads and brass nipple and gasket...
   
3-D BullsEye - 1/2" NPT

3-D BullsEye - 1/2" NPT

$32.30
P/N: DC-3DB0500

The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

SPECIFICATIONS
Thread Sizes: 1/2 inch NPT, (picture shown is a standard unit), Sizes 1/2 inch NPT and above are a solid piece of cast arcylic with male threads, Sizes 1/4 inch and 3/8 inch NPT come with female threads and brass nipples included, All metric sizes come with female threads and brass nipple and gasket...
   
3-D BullsEye - 1.25" NPT

3-D BullsEye - 1.25" NPT

$43.38
P/N: DC-3DB1250

The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

SPECIFICATIONS
Thread Sizes: 1.25 inch NPT, (picture shown is a standard unit), Sizes 1/2 inch NPT and above are a solid piece of cast arcylic with male threads, Sizes 1/4 inch and 3/8 inch NPT come with female threads and brass nipples included, All metric sizes come with female threads and brass nipple and gasket...
   
3-D BullsEye - 1.50" NPT

3-D BullsEye - 1.50" NPT

$53.12
P/N: DC-3DB1500

The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

SPECIFICATIONS
Thread Sizes: 1.50 inch NPT, (picture shown is a standard unit), Sizes 1/2 inch NPT and above are a solid piece of cast arcylic with male threads, Sizes 1/4 inch and 3/8 inch NPT come with female threads and brass nipples included, All metric sizes come with female threads and brass nipple and gasket...
   
3-D BullsEye - 2" NPT

3-D BullsEye - 2" NPT

$62.52
P/N: DC-3DB2000

The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

SPECIFICATIONS
Thread Sizes: 2 inch NPT, (picture shown is a standard unit), Sizes 1/2 inch NPT and above are a solid piece of cast arcylic with male threads, Sizes 1/4 inch and 3/8 inch NPT come with female threads and brass nipples included, All metric sizes come with female threads and brass nipple and gasket...
   
Oil Level Indicator 18"

Oil Level Indicator 18"

$155.35
P/N: DC-OLI18

The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to gauge the oil level inside large tanks, gearboxes and reservoirs. The OLI is a clear acrylic column with 1/2 inch NPT threads at each end. Red and green level marker stickers are included with the OLI to mark...

SPECIFICATIONS
Material:, Stain-resistant acrylic, Brass fittings standard (15 inch and above), Recommended Temperature Range:, -40F to 200F, -40C to 93C, Maximum Operating Pressure:, 65 psi, 4.48 bar, Chemical Compatibility:, All gear, mineral and synthetic oils, Available Options:, Lengths ranging...
   
Oil Level Indicator 9"

Oil Level Indicator 9"

$51.90
P/N: DC-OLI9

The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to gauge the oil level inside large tanks, gearboxes and reservoirs. The OLI is a clear acrylic column with 1/2 inch NPT threads at each end. Red and green level marker stickers are included with the OLI to mark...

SPECIFICATIONS
Material:, Stain-resistant acrylic, Brass fittings standard (15 inch and above), Recommended Temperature Range:, -40F to 200F, -40C to 93C, Maximum Operating Pressure:, 65 psi, 4.48 bar, Chemical Compatibility:, All gear, mineral and synthetic oils, Available Options:, Lengths ranging...
   
3-D BullsEye Metric 10X1.0

3-D BullsEye Metric 10X1.0

$28.68
P/N: DC-3DBM10X1.0

The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

SPECIFICATIONS
3-D BullsEye Metric 10X1.0
   
3-D BullsEye Metric 10X1.5

3-D BullsEye Metric 10X1.5

$29.04
P/N: DC-3DBM10X1.5

The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

SPECIFICATIONS
3-D BullsEye Metric 10X1.5
   
3-D BullsEye Metric 12X1.5

3-D BullsEye Metric 12X1.5

$29.41
P/N: DC-3DBM12X1.5

The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

SPECIFICATIONS
3-D BullsEye Metric 12X1.5
   
3-D BullsEye Metric 16X1.5

3-D BullsEye Metric 16X1.5

$28.56
P/N: DC-3DBM16x1.5

The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

SPECIFICATIONS
3-D BullsEye Metric 16X1.5
   
3-D BullsEye Metric 20X1.5

3-D BullsEye Metric 20X1.5

$32.19
P/N: DC-3DBM20X1.5

The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

SPECIFICATIONS
3-D BullsEye Metric 20X1.5
   
3-D BullsEye Metric 22X1.5

3-D BullsEye Metric 22X1.5

$32.19
P/N: DC-3DBM22X1.5

The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

SPECIFICATIONS
3-D BullsEye Metric 22X1.5
   
3-D BullsEye Metric 24X1.5

3-D BullsEye Metric 24X1.5

$36.66
P/N: DC-3DBM24X1.5

The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

SPECIFICATIONS
3-D BullsEye Metric 24X1.5
   
3-D BullsEye Metric 26X1.5

3-D BullsEye Metric 26X1.5

$37.51
P/N: DC-3DBM26X1.5

The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

SPECIFICATIONS
3-D BullsEye Metric 26X1.5
   
3-D BullsEye Metric 27X1.5

3-D BullsEye Metric 27X1.5

$38.41
P/N: DC-3DBM27X1.5

The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

SPECIFICATIONS
3-D BullsEye Metric 27X1.5
   
3-D BullsEye Metric 30X1.5

3-D BullsEye Metric 30X1.5

$40.10
P/N: DC-3DBM30X1.5

The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

SPECIFICATIONS
3-D BullsEye Metric 30X1.5
   
3-D BullsEye Metric 30X2.0

3-D BullsEye Metric 30X2.0

$40.10
P/N: DC-3DBM30X2.0

The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

SPECIFICATIONS
3-D BullsEye Metric 30X2.0
   
3-D BullsEye Metric 33X1.5

3-D BullsEye Metric 33X1.5

$42.70
P/N: DC-3DBM33X1.5

The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

SPECIFICATIONS
3-D BullsEye Metric 33X1.5
   
Oil Level Indicator 6"

Oil Level Indicator 6"

$46.15
P/N: DC-OLI6

The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to gauge the oil level inside large tanks, gearboxes and reservoirs. The OLI is a clear acrylic column with 1/2 inch NPT threads at each end. Red and green level marker stickers are included with the OLI to mark...

SPECIFICATIONS
Material:, Stain-resistant acrylic, Brass fittings standard (15 inch and above), Recommended Temperature Range:, -40F to 200F, -40C to 93C, Maximum Operating Pressure:, 65 psi, 4.48 bar, Chemical Compatibility:, All gear, mineral and synthetic oils, Available Options:, Lengths ranging...
   
Oil Level Indicator 15"

Oil Level Indicator 15"

$132.07
P/N: DC-OLI-15

The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to gauge the oil level inside large tanks, gearboxes and reservoirs. The OLI is a clear acrylic column with 1/2 inch NPT threads at each end. Red and green level marker stickers are included with the OLI to mark...

SPECIFICATIONS
Material:, Stain-resistant acrylic, Brass fittings standard (15 inch and above), Recommended Temperature Range:, -40F to 200F, -40C to 93C, Maximum Operating Pressure:, 65 psi, 4.48 bar, Chemical Compatibility:, All gear, mineral and synthetic oils, Available Options:, Lengths ranging...
   
Oil Level Indicator 3"

Oil Level Indicator 3"

$41.00
P/N: DC-OLI3

The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to gauge the oil level inside large tanks, gearboxes and reservoirs. The OLI is a clear acrylic column with 1/2 inch NPT threads at each end. Red and green level marker stickers are included with the OLI to mark...

SPECIFICATIONS
Material:, Stain-resistant acrylic, Brass fittings standard (15 inch and above), Recommended Temperature Range:, -40F to 200F, -40C to 93C, Maximum Operating Pressure:, 65 psi, 4.48 bar, Chemical Compatibility:, All gear, mineral and synthetic oils, Available Options:, Lengths ranging...
   
3-D BullsEye 1/2" BSPP

3-D BullsEye 1/2" BSPP

$32.95
P/N: DC-3DBBSPP0500

The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

SPECIFICATIONS
3-D BullsEye 1/2 inch BSPP
   
3-D BullsEye 3/4" BSPP

3-D BullsEye 3/4" BSPP

$35.11
P/N: DC-3DBBSPP0750

The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

SPECIFICATIONS
3-D BullsEye 1/2 inch BSPP
   
3-D BullsEye 1" BSPP

3-D BullsEye 1" BSPP

$36.98
P/N: DC-3DBBSPP1000

The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

SPECIFICATIONS
3-D BullsEye 1/2 inch BSPP
   
3-D BullsEye 1-1/2" BSPP

3-D BullsEye 1-1/2" BSPP

$45.33
P/N: DC-3DBBSPP1500

The 3-D Bullseye makes the job of a lubrication technician or maintenance manager easier. The standard sight windows on oil reservoirs make it difficult to view the oil level, stain easily, and must be replaced often. The 3-D BullsEye is a clear cylinder made from one solid piece of acrylic with threading...

SPECIFICATIONS
3-D BullsEye 1-1/2 inch BSPP
   
Oil Level Indicator 21"

Oil Level Indicator 21"

$173.38
P/N: DC-OLI21

The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to gauge the oil level inside large tanks, gearboxes and reservoirs. The OLI is a clear acrylic column with 1/2 inch NPT threads at each end. Red and green level marker stickers are included with the OLI to mark...

SPECIFICATIONS
Material:, Stain-resistant acrylic, Brass fittings standard (15 inch and above), Recommended Temperature Range:, -40F to 200F, -40C to 93C, Maximum Operating Pressure:, 65 psi, 4.48 bar, Chemical Compatibility:, All gear, mineral and synthetic oils, Available Options:, Lengths ranging...
   
Oil Level Indicator 24"

Oil Level Indicator 24"

$197.91
P/N: DC-OLI24

The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to gauge the oil level inside large tanks, gearboxes and reservoirs. The OLI is a clear acrylic column with 1/2 inch NPT threads at each end. Red and green level marker stickers are included with the OLI to mark...

SPECIFICATIONS
Material:, Stain-resistant acrylic, Brass fittings standard (15 inch and above), Recommended Temperature Range:, -40F to 200F, -40C to 93C, Maximum Operating Pressure:, 65 psi, 4.48 bar, Chemical Compatibility:, All gear, mineral and synthetic oils, Available Options:, Lengths ranging...
   
Oil Level Indicator 27"

Oil Level Indicator 27"

$222.45
P/N: DC-OLI27

The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to gauge the oil level inside large tanks, gearboxes and reservoirs. The OLI is a clear acrylic column with 1/2 inch NPT threads at each end. Red and green level marker stickers are included with the OLI to mark...

SPECIFICATIONS
Material:, Stain-resistant acrylic, Brass fittings standard (15 inch and above), Recommended Temperature Range:, -40F to 200F, -40C to 93C, Maximum Operating Pressure:, 65 psi, 4.48 bar, Chemical Compatibility:, All gear, mineral and synthetic oils, Available Options:, Lengths ranging...
   
Oil Level Indicator 30"

Oil Level Indicator 30"

$254.51
P/N: DC-OLI30

The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to gauge the oil level inside large tanks, gearboxes and reservoirs. The OLI is a clear acrylic column with 1/2 inch NPT threads at each end. Red and green level marker stickers are included with the OLI to mark...

SPECIFICATIONS
Material:, Stain-resistant acrylic, Brass fittings standard (15 inch and above), Recommended Temperature Range:, -40F to 200F, -40C to 93C, Maximum Operating Pressure:, 65 psi, 4.48 bar, Chemical Compatibility:, All gear, mineral and synthetic oils, Available Options:, Lengths ranging...