Email Us

  info.sales@lubrigard.com

SHOP BY

  • Filter By Sub Category
    Oil Analysis Kits
    Sampling Hardware
    Instrumentation
  • MANUFACTURER
    WearCheck
    Lubrigard
    Des-Case
    MP Filtri
    CINRG Systems Inc.
    Luneta
    Baumer
    Stauff
    Klotz
    CheckFluid
    Solar-Cult
    Kittiwake
 Reset Filters
 
  •  
  •  
per page
  • Sample Bottle
    Sample Bottle

    Sample Bottle

    $0.75
    P/N: CBP100


       
    This 100 ml high-density polymer sample bottle is clear and resists both high temperature and pressure and is suitable for oils, fuels and other liquids.
    P/N: CBP100

    $0.75 
       
  • Sample Tubing (1/4" O.D.)
    Sample Tubing (1/4" O.D.)

    Sample Tubing (1/4" O.D.)

    $0.37
    P/N: PT44

    This sample tubing can be used with all Lubrigard vacuum sample pumps, and with other sampling hardware that requires replaceable plastic tubing.

       
    1/4" OD (3/16" ID) hard LDPE tubing (SOLD PER FOOT)
    P/N: PT44

    $0.37 
       
  • Sample Mailer Container & Sample Bottle
    Sample Mailer Container & Sample Bottle

    Sample Mailer Container & Sample Bottle

    $2.59
    P/N: BLC1


    SPECIFICATIONS
    Mailing container and 100 mL oil sampling bottle.
       
    Mailing container and 100 mL oil sampling bottle.
    P/N: BLC1

    $2.59 
       
  • Vacuum Sample Pump
    Vacuum Sample Pump

    Vacuum Sample Pump

    $29.78
    P/N: SP38


       
    These pumps will generate in excess of 27 inches of Hg, suitable for sampling of viscous fluids (i.e. oils).
    P/N: SP38

    $29.78 
       
  • 24" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Swivel
    24" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Swivel

    24" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Swivel

    $76.90
    P/N: L14NTRS24

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: Stainless Steel (24"), Adapter: Swivel 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NTRS24

    $76.90 
       
  • Lo-Pressure sampling hose (Hi-Visc)
    Lo-Pressure sampling hose (Hi-Visc)

    Lo-Pressure sampling hose (Hi-Visc)

    $32.25
    P/N: SLF4


       
    P/N: SLF4

    $32.25 
       
  • Sample Tubing (3/16" O.D.)
    Sample Tubing (3/16" O.D.)

    Sample Tubing (3/16" O.D.)

    $0.50
    P/N: PT33

    This sample tubing can be used with all Lubrigard vacuum sample pumps, and with other sampling hardware that requires replaceable plastic tubing.

       
    3/16" OD tubing (SOLD PER FOOT)
    P/N: PT33

    $0.50 
       
  • 12" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid
    12" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

    12" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

    $58.98
    P/N: L14NTR12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 45cm Stainless Steel (12"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NTR12

    $58.98 
       
  • Gauge Plug - 1/4" NPT
    Gauge Plug - 1/4" NPT

    Gauge Plug - 1/4" NPT

    $13.10
    P/N: GP14


    SPECIFICATIONS
    max pressure: 9000 PSI, materials:, Metal Parts: Steel, Ball: Stainless Steel, Seals: Standard FPM-Viton Temperatur Range -4°F to +392°F (-20°C to +200°C), thread size: 1/4" NPT
       
    These high quality, brass, leak-proof gauge plugs are suitable for installation on any pressurized lubricant point.
    P/N: GP14

    $13.10 
       
  • 12" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Swivel
    12" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Swivel

    12" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Swivel

    $68.16
    P/N: L14NTRS12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: Stainless Steel (12"), Adapter: Swivel 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NTRS12

    $68.16 
       
  • 18" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid
    18" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

    18" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

    $63.36
    P/N: L14NTR18

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 45cm Stainless Steel (18"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NTR18

    $63.36 
       
  • KP series push button sampling valve, 1/4" NPT
    KP series push button sampling valve, 1/4" NPT

    KP series push button sampling valve, 1/4" NPT

    $31.11
    P/N: KP14N

    The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

    SPECIFICATIONS
    Body Component: Carbon Steel, Button/Spout/Cap: Brass, Seals: Viton, Spring: Carbon Steel, Thread Size: 1/4" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
       
    The KP Series Sampling valve allows for sample taking at the "push of a button".
    P/N: KP14N

    $31.11 
       
  • 1/4"B Thread Together Probe w/1/4"Tubing
    1/4"B Thread Together Probe w/1/4"Tubing

    1/4"B Thread Together Probe w/1/4"Tubing

    $13.97
    P/N: SBF4


       
  • KP series push button sampling valve, 1/8" NPT
    KP series push button sampling valve, 1/8" NPT

    KP series push button sampling valve, 1/8" NPT

    $31.11
    P/N: KP18N

    The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

    SPECIFICATIONS
    Body Component: Carbon Steel, Button/Spout/Cap: Brass, Seals: Viton, Spring: Carbon Steel, Thread Size: 1/8" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
       
    The KP Series Sampling valve allows for sample taking at the "push of a button".
    P/N: KP18N

    $31.11 
       
  • L Series hi-viscosity, 1/4" NPT
    L Series hi-viscosity, 1/4" NPT

    L Series hi-viscosity, 1/4" NPT

    $28.77
    P/N: L14NC


       
    P/N: L14NC

    $28.77 
       
  • 3-way stop-cock
    3-way stop-cock

    3-way stop-cock

    $4.76
    P/N: POP96652


       
    3-way Stop-Cock for Dissolved-gas analysis syringe.
    P/N: POP96652

    $4.76 
       
  • Vacuum Sample Pump
    Vacuum Sample Pump

    Vacuum Sample Pump

    $27.97
    P/N: SP38PR

    This pump will generate in excess of 27 inches of Hg, suitable for sampling of viscous fluids (i.e. oils), and is equipped with a probalyzer style needle valve suitable for sampling from pressurized components equipped with the mini-gauge plug.

       
    Oil Sampling Pump suitable for vacuum or probalyzer sampling.
    P/N: SP38PR

    $27.97 
       
  • KST series probe, 1/8" NPTF
    KST series probe, 1/8" NPTF

    KST series probe, 1/8" NPTF

    $21.82
    P/N: KST18N

    The KST Sample valves are suitable for mobile and marine applications, and their unique design makes them suitable for use with the probalizer-style vacuum sampling pump for taking rapid and accurate oil analysis samples.

    SPECIFICATIONS
    Thread Size: 1/8" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
       
    The KST Series Sampling valve works hand-in-hand with the probalizer-style vacuum sample pump.
    P/N: KST18N

    $21.82 
       
  • 24" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid
    24" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

    24" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

    $67.74
    P/N: L14NTR24

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: Stainless Steel 24", Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NTR24

    $67.74 
       
  • 12" Steel, 1/4" NPT, rigid (stainless tube)
    12" Steel, 1/4" NPT, rigid (stainless tube)

    12" Steel, 1/4" NPT, rigid (stainless tube)

    $62.20
    P/N: B14NTR12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 30cm (12"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: B14NTR12

    $62.20 
       
  • 48" Steel, 1/4" NPT, rigid (Stainless Tube)
    48" Steel, 1/4" NPT, rigid (Stainless Tube)

    48" Steel, 1/4" NPT, rigid (Stainless Tube)

    $116.87
    P/N: B14NTR48

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 48", Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range:...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: B14NTR48

    $116.87 
       
  • 24" Steel, 1/4" NPT, rigid
    24" Steel, 1/4" NPT, rigid

    24" Steel, 1/4" NPT, rigid

    $57.06
    P/N: B14NT24

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 60cm (24"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request,...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: B14NT24

    $57.06 
       
  • 12" Steel, high flow, 1/4" NPT Thread, Rigid, 5/16 OD SS Tube
    12" Steel, high flow, 1/4" NPT Thread, Rigid, 5/16 OD SS Tube

    12" Steel, high flow, 1/4" NPT Thread, Rigid, 5/16 OD SS Tube

    $70.78
    P/N: L14N5TR12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 30cm (12"), Adapter: Fixed 1/4" Male NPT, OD: 5/16", Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14N5TR12

    $70.78 
       
  • KST series probe, 1/4" NPTF
    KST series probe, 1/4" NPTF

    KST series probe, 1/4" NPTF

    $21.82
    P/N: KST14N

    The KST Sample valves are suitable for mobile and marine applications, and their unique design makes them suitable for use with the probalizer-style vacuum sampling pump for taking rapid and accurate oil analysis samples.

    SPECIFICATIONS
    Thread Size: 1/4" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
       
    The KST Series Sampling valve works hand-in-hand with the probalizer-style vacuum sample pump.
    P/N: KST14N

    $21.82 
       
  • 12" Steel, 1/4" NPT, swivel
    12" Steel, 1/4" NPT, swivel

    12" Steel, 1/4" NPT, swivel

    $68.69
    P/N: B14NTS12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 30cm (12"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request,...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: B14NTS12

    $68.69 
       
  • Hi-pressure Sampling System with Needle Valve
    Hi-pressure Sampling System with Needle Valve

    Hi-pressure Sampling System with Needle Valve

    $144.37
    P/N: SHHPNV01

    The Lubrigard Hi-pressure Sampling System incorporates a needle valve into the sampling line to allow metering of the pressure at the sample side. This system is very useful for sampling systems with variable high pressures (i.e. injection moulding, presses).

       
    These hose assemblies are the safest way for taking oil samples from very high pressure systems equipped with standard gauge plugs.
    P/N: SHHPNV01

    $144.37 
       
  • L High Flow Valve with 3/4" NPT, 3D Sight Glass, Swivel, 12"SS Tube
    L High Flow Valve with 3/4" NPT, 3D Sight Glass, Swivel, 12"SS Tube

    L High Flow Valve with 3/4" NPT, 3D Sight Glass, Swivel, 12"SS Tube

    $100.54
    P/N: L12NATRS12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 45cm Stainless Steel (12"), Adapter: 3/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L12NATRS12

    $100.54 
       
  • 36" Stainless Steel, 1/4" NPT, rigid
    36" Stainless Steel, 1/4" NPT, rigid

    36" Stainless Steel, 1/4" NPT, rigid

    $99.06
    P/N: B14NTR36

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 36", Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range:...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: B14NTR36

    $99.06 
       
  • 24" Stainless Steel, high flow, 1/4" NPT, swivel
    24" Stainless Steel, high flow, 1/4" NPT, swivel

    24" Stainless Steel, high flow, 1/4" NPT, swivel

    $202.95
    P/N: L14NRTRS24

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 61cm (24"), Adapter: Swivel 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless-steel, Sample Test Port: stainless-steel, Seals Standard: Viton (FPM) - EPDM, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NRTRS24

    $202.95 
       
  • 1/4" Swivel Handle Tube Bender (LT-Series)
    1/4" Swivel Handle Tube Bender (LT-Series)

    1/4" Swivel Handle Tube Bender (LT-Series)

    $91.11
    P/N: PTB01


       
    Tube Bender for use with LT-Series pitot tubes (1/4").
    P/N: PTB01

    $91.11 
       
  • 24" Steel, 1/4" NPT, swivel
    24" Steel, 1/4" NPT, swivel

    24" Steel, 1/4" NPT, swivel

    $73.36
    P/N: B14NTS24

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 60cm (24"), pter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: B14NTS24

    $73.36 
       
  • 12" Stainless Steel, high flow, 1/4" NPT, swivel
    12" Stainless Steel, high flow, 1/4" NPT, swivel

    12" Stainless Steel, high flow, 1/4" NPT, swivel

    $194.21
    P/N: L14NRTRS12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 30cm (12"), Adapter: 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless-steel, Sample Test Port: stainless-steel, Seals Standard: Viton (FPM) - EPDM, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NRTRS12

    $194.21 
       
  • Vacuum Sample Pump
    Vacuum Sample Pump

    Vacuum Sample Pump

    $92.36
    P/N: SP48U


       
    These pumps will generate in excess of 27 inches of Hg, suitable for sampling of viscous fluids (i.e. oils).
    P/N: SP48U

    $92.36 
       
  • Disposable probe tube cap
    Disposable probe tube cap

    Disposable probe tube cap

    $2.52
    P/N: SVP

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 30cm (12"),
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can
    P/N: SVP

    $2.52 
       
  • KST series probe
    KST series probe

    KST series probe

    $9.24
    P/N: KPB4


       
    Compact Brass button probe. KST Brass 90 deg button probe with barb for 1/4" OD (3/16" ID) PVC tubing
    P/N: KPB4

    $9.24 
       
  • Cabinet Base Configuration with integrated 0,18 cc pump, without instruments for 230/400V 50/60Hz 3P
    Cabinet Base Configuration with integrated 0,18 cc pump, without instruments for 230/400V 50/60Hz 3P

    Cabinet Base Configuration with integrated 0,18 cc pump, without instruments for 230/400V 50/60Hz 3P

    $3,742.20
    P/N: CMC2AA1A111


       
    Cabinet Base Configuration with integrated 0,18 cc pump, without instruments for 230/400V 50/60Hz 3PH / 0.18kW
    P/N: CMC2AA1A111

    $3,742.20 
       
  • Plate Mounted Base Configuration with integrated 0.18 cc pump, without instruments for 230/400V 50/6
    Plate Mounted Base Configuration with integrated 0.18 cc pump, without instruments for 230/400V 50/6

    Plate Mounted Base Configuration with integrated 0.18 cc pump, without instruments for 230/400V 50/6

    $3,234.42
    P/N: CMC1AA10111


       
    Plate Mounted Base Configuration with integrated 0.18 cc pump, without instruments for 230/400V 50/60Hz 3PH / 0.18kW
    P/N: CMC1AA10111

    $3,234.42 
       
  • Flow Control Assembly for CMS: 0,20 l/min, 1/4”BSP_m inlet, MINIMESS outlet, HEX body, 14-420 bar
    Flow Control Assembly for CMS: 0,20 l/min, 1/4”BSP_m inlet, MINIMESS outlet, HEX body, 14-420 bar

    Flow Control Assembly for CMS: 0,20 l/min, 1/4”BSP_m inlet, MINIMESS outlet, HEX body, 14-420 bar

    $220.50
    P/N: 9400602


       
    Flow Control Assembly for CMS: 0,20 l/min, 1/4”BSP_m inlet, MINIMESS outlet, HEX body, 14-420 bar
    P/N: 9400602

    $220.50 
       
  • RS485 to USB converter - 24vdc power supply
    RS485 to USB converter - 24vdc power supply

    RS485 to USB converter - 24vdc power supply

    $608.58
    P/N: CMS-USBi


       
    RS485 to USB converter / 24vdc power supply
    P/N: CMS-USBi

    $608.58 
       
  • No Moisture sensor, for phosphate ester and aggressive fluids, display, customizable relay, M16x2 co
    No Moisture sensor, for phosphate ester and aggressive fluids, display, customizable relay, M16x2 co

    No Moisture sensor, for phosphate ester and aggressive fluids, display, customizable relay, M16x2 co

    $4,260.06
    P/N: CMS0SKRG1-2


       
    No Moisture sensor, for offshore and selected water based fluids, display, customizable relay, M16x2 connection
    P/N: CMS0SKRG1-2

    $4,260.06 
       
  • No Moisture sensor, for offshore and selected water based fluids, display, customizable relay, M16x2
    No Moisture sensor, for offshore and selected water based fluids, display, customizable relay, M16x2

    No Moisture sensor, for offshore and selected water based fluids, display, customizable relay, M16x2

    $3,931.20
    P/N: CMS0NKRG1-2


       
    No Moisture sensor, for offshore and selected water based fluids, display, customizable relay, M16x2 connection
    P/N: CMS0NKRG1-2

    $3,931.20 
       
  • Moisture sensor, for mineral fluid, no display, customizable relay, M16x2 connection, ATEX ZONE II C
    Moisture sensor, for mineral fluid, no display, customizable relay, M16x2 connection, ATEX ZONE II C

    Moisture sensor, for mineral fluid, no display, customizable relay, M16x2 connection, ATEX ZONE II C

    $17,144.82
    P/N: CMSWM0RG1AZ2-2


       
    Moisture sensor, for mineral fluid, no display, customizable relay, M16x2 connection, ATEX ZONE II CE II 3G Ex nR IIB T6 x
    P/N: CMSWM0RG1AZ2-2

    $17,144.82 
       
  • Moisture sensor, for mineral fluid, display, customizable relay, M16x2 connection, flow control asse
    Moisture sensor, for mineral fluid, display, customizable relay, M16x2 connection, flow control asse

    Moisture sensor, for mineral fluid, display, customizable relay, M16x2 connection, flow control asse

    $3,906.00
    P/N: CMSWMKRG1FC1-2


       
    Moisture sensor, for mineral fluid, display, customizable relay, M16x2 connection, flow control assembled
    P/N: CMSWMKRG1FC1-2

    $3,906.00 
       
  • CMS remote display unit with keypad
    CMS remote display unit with keypad

    CMS remote display unit with keypad

    $1,575.00
    P/N: CMS-RDU2


       
    CMS remote display unit with keypad
    P/N: CMS-RDU2

    $1,575.00 
       
  • Moisture sensor, for mineral fluid, no display, customizable relay, M16x2 connection
    Moisture sensor, for mineral fluid, no display, customizable relay, M16x2 connection

    Moisture sensor, for mineral fluid, no display, customizable relay, M16x2 connection

    $3,184.02
    P/N: CMSWM0RG1-2


       
    Moisture sensor, for mineral fluid, no display, customizable relay, M16x2 connection
    P/N: CMSWM0RG1-2

    $3,184.02 
       
  • No Moisture sensor, for mineral fluid, display, customizable relay, M16x2 connection
    No Moisture sensor, for mineral fluid, display, customizable relay, M16x2 connection

    No Moisture sensor, for mineral fluid, display, customizable relay, M16x2 connection

    $3,255.84
    P/N: CMS0MKRG1-2


       
    No Moisture sensor, for mineral fluid, display, customizable relay, M16x2 connection
    P/N: CMS0MKRG1-2

    $3,255.84 
       
  • No Moisture sensor, for mineral fluid, no display, customizable relay, M16x2 connection
    No Moisture sensor, for mineral fluid, no display, customizable relay, M16x2 connection

    No Moisture sensor, for mineral fluid, no display, customizable relay, M16x2 connection

    $2,754.26
    P/N: CMS0M0RG1-2


       
    No Moisture sensor, for mineral fluid, no display, customizable relay, M16x2 connection
    P/N: CMS0M0RG1-2

    $2,754.26 
       
  • Moisture sensor, for mineral fluid, display, customizable relay, M16x2 connection
    Moisture sensor, for mineral fluid, display, customizable relay, M16x2 connection

    Moisture sensor, for mineral fluid, display, customizable relay, M16x2 connection

    $3,684.25
    P/N: CMSWMKRG1-2


       
    Moisture sensor, for mineral fluid, display, customizable relay, M16x2 connection
    P/N: CMSWMKRG1-2

    $3,684.25 
       
  • 36" Steel, 1/4" NPT, swivel (stainless tube)
    36" Steel, 1/4" NPT, swivel (stainless tube)

    36" Steel, 1/4" NPT, swivel (stainless tube)

    $115.43
    P/N: B14NTRS36

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 36", Adapter: Swivel 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range:...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: B14NTRS36

    $115.43 
       
  • 60" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Swivel
    60" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Swivel

    60" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Swivel

    $137.04
    P/N: L14NTRS60

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: Stainless Steel (60"), Adapter: Swivel 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NTRS60

    $137.04 
       
  • KST series probe, 1/2" NPTF, Steel
    KST series probe, 1/2" NPTF, Steel

    KST series probe, 1/2" NPTF, Steel

    $25.90
    P/N: KST8NC

    The KST Sample valves are suitable for mobile and marine applications, and their unique design makes them suitable for use with the probalizer-style vacuum sampling pump for taking rapid and accurate oil analysis samples.

    SPECIFICATIONS
    Thread Size: 1/2" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
       
    The KST Series Sampling valve works hand-in-hand with the probalizer-style vacuum sample pump.
    P/N: KST8NC

    $25.90 
       
  • KST series probe, 3/8" NPTF, Steel
    KST series probe, 3/8" NPTF, Steel

    KST series probe, 3/8" NPTF, Steel

    $25.23
    P/N: KST6NC

    The KST Sample valves are suitable for mobile and marine applications, and their unique design makes them suitable for use with the probalizer-style vacuum sampling pump for taking rapid and accurate oil analysis samples.

    SPECIFICATIONS
    Thread Size: 3/8" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
       
    The KST Series Sampling valve works hand-in-hand with the probalizer-style vacuum sample pump.
    P/N: KST6NC

    $25.23 
       
  • Fluid Level Sight Glass - 1/2" NPT
    Fluid Level Sight Glass - 1/2" NPT

    Fluid Level Sight Glass - 1/2" NPT

    $9.27
    P/N: SLW-08


    SPECIFICATIONS
    Thread Sizes: 1/2" NPT,
       
    Fluid Level Sight Glasses
    P/N: SLW-08

    $9.27 
       
  • M Series M16x2 Probe Adapter with Barb for 1/4" OD Disposable Tubing
    M Series M16x2 Probe Adapter with Barb for 1/4" OD Disposable Tubing

    M Series M16x2 Probe Adapter with Barb for 1/4" OD Disposable Tubing

    $32.25
    P/N: SMF4


       
  • Motor Control Board, Dual (SMCB2)
    Motor Control Board, Dual (SMCB2)

    Motor Control Board, Dual (SMCB2)

    $804.53
    P/N: CS-MCB2

    CS-APC-2 Genuine Spare Parts

    SPECIFICATIONS
    Motor control board for CINRG CS-APC-2 syringe pump.
       
    CS-APC-2 Genuine Spare Parts
    P/N: CS-MCB2

    $804.53 
       
  • VITON TUBING  1/4" OD 1/8" ID  (1 foot)
    VITON TUBING  1/4" OD 1/8" ID  (1 foot)

    VITON TUBING  1/4" OD 1/8" ID (1 foot)

    $7.75
    P/N: CS-T1418-1

    CS-APC-2 Genuine Spare Parts

    SPECIFICATIONS
    Sample Needle for CS-HVA-1
       
    CS-APC-2 Genuine Spare Parts
    P/N: CS-T1418-1

    $7.75 
       
  • PTFE TUBING 1/8" ID X 0.085" ID (25FT x 2.15MM)
    PTFE TUBING 1/8" ID X 0.085" ID (25FT x 2.15MM)

    PTFE TUBING 1/8" ID X 0.085" ID (25FT x 2.15MM)

    $95.40
    P/N: CS-T18085-25

    CS-APC-2 Genuine Spare Parts

    SPECIFICATIONS
    Sample Needle for CS-HVA-1
       
    CS-APC-2 Genuine Spare Parts
    P/N: CS-T18085-25

    $95.40 
       
  • FLANGED NUT/WASHER 1/8" (10 PIECES)
    FLANGED NUT/WASHER 1/8" (10 PIECES)

    FLANGED NUT/WASHER 1/8" (10 PIECES)

    $46.32
    P/N: CS-W18-10

    CS-APC-2 Genuine Spare Parts

    SPECIFICATIONS
    Sample Needle for CS-HVA-1
       
    CS-APC-2 Genuine Spare Parts
    P/N: CS-W18-10

    $46.32 
       
  • 25ml SYRINGE
    25ml SYRINGE

    25ml SYRINGE

    $1,272.00
    P/N: CS-S25

    CS-APC-2 Genuine Spare Parts

    SPECIFICATIONS
    Sample Needle for CS-HVA-1
       
    CS-APC-2 Genuine Spare Parts
    P/N: CS-S25

    $1,272.00 
       
  • 24V DC Motor and Gearbox Combination
    24V DC Motor and Gearbox Combination

    24V DC Motor and Gearbox Combination

    $333.52
    P/N: CS-M24GB

    CS-APC-2 Genuine Spare Parts

    SPECIFICATIONS
    Sample Needle for CS-HVA-1
       
    CS-APC-2 Genuine Spare Parts
    P/N: CS-M24GB

    $333.52 
       
  • Sample Needle for CS-HVA-1
    Sample Needle for CS-HVA-1

    Sample Needle for CS-HVA-1

    $300.00
    P/N: CS-HVA-SN-01

    Sample uptake needle for CINRG Houillon Viscometer Automation system

    SPECIFICATIONS
    Sample Needle for CS-HVA-1
       
    Sample uptake needle for CINRG Houillon Viscometer Automation system
    P/N: CS-HVA-SN-01

    $300.00 
       
  • High Flow L Valve, 1/4" -18 NPTF, Swivel w/ 18" SS Tube
    High Flow L Valve, 1/4" -18 NPTF, Swivel w/ 18" SS Tube

    High Flow L Valve, 1/4" -18 NPTF, Swivel w/ 18" SS Tube

    $72.53
    P/N: L14NTRS18

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NTRS18

    $72.53 
       
  • Fast Sampler Upgrade Kit
    Fast Sampler Upgrade Kit

    Fast Sampler Upgrade Kit

    $7,400.00
    P/N: CS-FSU-1


       
    Upgrade for the Fast Sampler system including stirrer, motor, raised tray base, and wash station.
    P/N: CS-FSU-1

    $7,400.00 
       
  • 24" Steel, 1/4" NPT, swivel (stainless tube)
    24" Steel, 1/4" NPT, swivel (stainless tube)

    24" Steel, 1/4" NPT, swivel (stainless tube)

    $85.35
    P/N: B14NTRS24

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 24", Adapter: Swivel 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range:...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: B14NTRS24

    $85.35 
       
  • Tritan Condition Monitoring Pod replacement sight glass 3/4" pods
    Tritan Condition Monitoring Pod replacement sight glass 3/4" pods

    Tritan Condition Monitoring Pod replacement sight glass 3/4" pods

    $50.00
    P/N: SG075F2PK

    Multipurpose The CMP is a multi-parameter inspection pod that greatly modernizes and expands daily one-minute inspections. Best applications include gearboxes, sumps, reservoirs and low pressure systems where high levels of reliability are critical. Revolutionary The CMP extends the capabilities of the...

    SPECIFICATIONS
    2.75" x 3.18" x 3.5" (w x h x l), Large acrylic sight glass with 1.4" diameter x 1.25" deep viewing area, Replacement sight glass only for 3/4" pods
       
    The new Condition Monitoring Pod (CMP) from Luneta is a powerful machine inspection tool that provides quick access to a variety of field lubricant tests and gives instant feedback on the condition of the lubricant and its environment.
    P/N: SG075F2PK

    $50.00 
       
  • Tritan Condition Monitoring Pod replacement sight glass 1/2" pods
    Tritan Condition Monitoring Pod replacement sight glass 1/2" pods

    Tritan Condition Monitoring Pod replacement sight glass 1/2" pods

    $50.00
    P/N: SG050F2PK

    Multipurpose The CMP is a multi-parameter inspection pod that greatly modernizes and expands daily one-minute inspections. Best applications include gearboxes, sumps, reservoirs and low pressure systems where high levels of reliability are critical. Revolutionary The CMP extends the capabilities of the...

    SPECIFICATIONS
    2.75" x 3.18" x 3.5" (w x h x l), Large acrylic sight glass with 1.4" diameter x 1.25" deep viewing area, Replacement sight glass only for 1/2" pods
       
    The new Condition Monitoring Pod (CMP) from Luneta is a powerful machine inspection tool that provides quick access to a variety of field lubricant tests and gives instant feedback on the condition of the lubricant and its environment.
    P/N: SG050F2PK

    $50.00 
       
  • CS-APC-2 Maintenance & Calibration
    CS-APC-2 Maintenance & Calibration

    CS-APC-2 Maintenance & Calibration

    $1,110.00
    P/N: CS-APC-2-MC


       
    1-day on-site maintenance and calibration for the CINRG CS-APC-2 system.
    P/N: CS-APC-2-MC

    $1,110.00 
       
  • LP Pushbutton Valve, 7/16" - 20 ORB w/ Lock Nut, Viton, 316 SS
    LP Pushbutton Valve, 7/16" - 20 ORB w/ Lock Nut, Viton, 316 SS

    LP Pushbutton Valve, 7/16" - 20 ORB w/ Lock Nut, Viton, 316 SS

    $113.47
    P/N: LPL4U-R

    The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

       
    The KP Series Sampling valve allows for sample taking at the "push of a button".
    P/N: LPL4U-R

    $113.47 
       
  • Upgraded Sample Tray Base for CS-APC-2
    Upgraded Sample Tray Base for CS-APC-2

    Upgraded Sample Tray Base for CS-APC-2

    $222.00
    P/N: CS-APC-ST-02


    SPECIFICATIONS
    Sample Positions: 104 (8 x 13)
       
    Upgraded Standard 104 position (8 x 13) sample tray for CINRG CS-APC-2 instrument.
    P/N: CS-APC-ST-02

    $222.00 
       
  • KP series push button sampling valve, 1/4" NPT - 18 NPTF Neoprene
    KP series push button sampling valve, 1/4" NPT - 18 NPTF Neoprene

    KP series push button sampling valve, 1/4" NPT - 18 NPTF Neoprene

    $44.36
    P/N: KPQ14NP

    The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

    SPECIFICATIONS
    Body Component: Carbon Steel, Button/Spout/Cap: Brass, Seals: Viton, Spring: Carbon Steel, Thread Size: 1/4" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
       
    The KP Series Sampling valve allows for sample taking at the "push of a button".
    P/N: KPQ14NP

    $44.36 
       
  • L High Flow Valve with 1" NPT, 3D Sight Glass, Swivel, 12"SS Tube
    L High Flow Valve with 1" NPT, 3D Sight Glass, Swivel, 12"SS Tube

    L High Flow Valve with 1" NPT, 3D Sight Glass, Swivel, 12"SS Tube

    $102.46
    P/N: L16NATRS12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 45cm Stainless Steel (12"), Adapter: 1" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L16NATRS12

    $102.46 
       
  • Vacuum Sample Pump (Vacuum Release Valve w/stand)
    Vacuum Sample Pump (Vacuum Release Valve w/stand)

    Vacuum Sample Pump (Vacuum Release Valve w/stand)

    $113.30
    P/N: SP38-97FM


    SPECIFICATIONS
    38 mm, Folding Stand
       
    These pumps will generate in excess of 27 inches of Hg, suitable for sampling of viscous fluids (i.e. oils).
    P/N: SP38-97FM

    $113.30 
       
  • 1oz Test Cup (case of 5000)
    1oz Test Cup (case of 5000)

    1oz Test Cup (case of 5000)

    $70.00
    P/N: APCSC5000


    SPECIFICATIONS
    Case: 5000 cups/case, Packaged: 50 sleeves of 100 cups, Cube Dimension: 1.20, Cases per Skid: 50
       
    1 oz Graduated Medicine cup (packed in a case of 5000 cups).
    P/N: APCSC5000

    $70.00 
       
  • Tritan Condition Monitoring Pod replacement sight glass 1, 1-1/4 and 1-1/2" pods
    Tritan Condition Monitoring Pod replacement sight glass 1, 1-1/4 and 1-1/2" pods

    Tritan Condition Monitoring Pod replacement sight glass 1, 1-1/4 and 1-1/2" pods

    $50.00
    P/N: SG10F2PK

    Multipurpose The CMP is a multi-parameter inspection pod that greatly modernizes and expands daily one-minute inspections. Best applications include gearboxes, sumps, reservoirs and low pressure systems where high levels of reliability are critical. Revolutionary The CMP extends the capabilities of the...

    SPECIFICATIONS
    2.75" x 3.18" x 3.5" (w x h x l), Large acrylic sight glass with 1.4" diameter x 1.25" deep viewing area, Replacement sight glass only for 1", 1-1/4" and 1-1/2" pods
       
    The new Condition Monitoring Pod (CMP) from Luneta is a powerful machine inspection tool that provides quick access to a variety of field lubricant tests and gives instant feedback on the condition of the lubricant and its environment.
    P/N: SG10F2PK

    $50.00 
       
  • High Flow L Valve 3/4"-16JIC Fem Swivel w/ 24" 5/16 OD SS Tube
    High Flow L Valve 3/4"-16JIC Fem Swivel w/ 24" 5/16 OD SS Tube

    High Flow L Valve 3/4"-16JIC Fem Swivel w/ 24" 5/16 OD SS Tube

    $82.05
    P/N: L8JFS5TRS24

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 24", Adapter: 3/4" - 16 JIC Fem Swivel,
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L8JFS5TRS24

    $82.05 
       
  • High Flow L Valve 3/4"-16JIC Fem Swivel w/ 36" 5/16 OD SS Tube
    High Flow L Valve 3/4"-16JIC Fem Swivel w/ 36" 5/16 OD SS Tube

    High Flow L Valve 3/4"-16JIC Fem Swivel w/ 36" 5/16 OD SS Tube

    $104.94
    P/N: L8JFS5TRS36

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 36", Adapter: 3/4" - 16 JIC Fem Swivel,
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L8JFS5TRS36

    $104.94 
       
  • High Flow L Valve 3/4"-16JIC Fem Swivel w/ 48" 5/16 OD SS Tube
    High Flow L Valve 3/4"-16JIC Fem Swivel w/ 48" 5/16 OD SS Tube

    High Flow L Valve 3/4"-16JIC Fem Swivel w/ 48" 5/16 OD SS Tube

    $127.97
    P/N: L8JFS5TRS48

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 48", Adapter: 3/4" - 16 JIC Fem Swivel,
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L8JFS5TRS48

    $127.97 
       
  • Vacuum Sample Pump
    Vacuum Sample Pump

    Vacuum Sample Pump

    $56.44
    P/N: SP32X


       
    These pumps will generate in excess of 27 inches of Hg, suitable for sampling of viscous fluids (i.e. oils).
    P/N: SP32X

    $56.44 
       
  • Sample Tray for CS-APC-2
    Sample Tray for CS-APC-2

    Sample Tray for CS-APC-2

    $1,625.04
    P/N: CS-APC-ST-01


    SPECIFICATIONS
    Sample Positions: 104 (8 x 13)
       
    Standard 104 position (8 x 13) sample tray for CINRG CS-APC-2 instrument.
    P/N: CS-APC-ST-01

    $1,625.04 
       
  • Fluid Level Sight Glass - 3/4" NPT
    Fluid Level Sight Glass - 3/4" NPT

    Fluid Level Sight Glass - 3/4" NPT

    $10.21
    P/N: SLW-12


    SPECIFICATIONS
    Thread Sizes: 3/4" NPT,
       
    Fluid Level Sight Glasses
    P/N: SLW-12

    $10.21 
       
  • 36" Stainless Steel, high flow, 1/4" NPT, swivel
    36" Stainless Steel, high flow, 1/4" NPT, swivel

    36" Stainless Steel, high flow, 1/4" NPT, swivel

    $225.85
    P/N: L14NRTRS36

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 91cm (36"), Adapter: Swivel 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless-steel, Sample Test Port: stainless-steel, Seals Standard: Viton (FPM) - EPDM, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NRTRS36

    $225.85 
       
  • Vacuum Sample Pump (Acrylic head)
    Vacuum Sample Pump (Acrylic head)

    Vacuum Sample Pump (Acrylic head)

    $92.36
    P/N: SP45-U


       
    These pumps will generate in excess of 27 inches of Hg, suitable for sampling of viscous fluids (i.e. oils).
    P/N: SP45-U

    $92.36 
       
  • KST series probe, 1/4" NPTF, viton, SS externals
    KST series probe, 1/4" NPTF, viton, SS externals

    KST series probe, 1/4" NPTF, viton, SS externals

    $65.99
    P/N: KST14NVR-C

    The KST Sample valves are suitable for mobile and marine applications, and their unique design makes them suitable for use with the probalizer-style vacuum sampling pump for taking rapid and accurate oil analysis samples.

    SPECIFICATIONS
    Thread Size: 1/4" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F), Seals: Viton, External: Stainless Steel
       
    The KST Series Sampling valve works hand-in-hand with the probalizer-style vacuum sample pump.
    P/N: KST14NVR-C

    $65.99 
       
  • 18" Stainless Steel, high flow, 1/4" NPT, swivel
    18" Stainless Steel, high flow, 1/4" NPT, swivel

    18" Stainless Steel, high flow, 1/4" NPT, swivel

    $198.59
    P/N: L14NRTRS18

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 45cm (18"), Adapter: Swivel 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless-steel, Sample Test Port: stainless-steel, Seals Standard: Viton (FPM) - EPDM, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NRTRS18

    $198.59 
       
  • Push Button Spout Barb
    Push Button Spout Barb

    Push Button Spout Barb

    $3.48
    P/N: KP4PT


       
    Push button spout barb for use with push button sampling valve.
    P/N: KP4PT

    $3.48 
       
  • KP series push button sampling valve (Viton/Stainless), 1/4" NPT
    KP series push button sampling valve (Viton/Stainless), 1/4" NPT

    KP series push button sampling valve (Viton/Stainless), 1/4" NPT

    $108.98
    P/N: KP14NV-R

    The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

    SPECIFICATIONS
    Body Component: Stainless Steel, Button/Spout/Cap: Stainless, Seals: Viton, Spring: Stainless, Thread Size: 1/4" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
       
    The KP Series Sampling valve allows for sample taking at the "push of a button".
    P/N: KP14NV-R

    $108.98 
       
  • Gauge Plug - 1/4" NPT Stainless Steel
    Gauge Plug - 1/4" NPT Stainless Steel

    Gauge Plug - 1/4" NPT Stainless Steel

    $70.27
    P/N: GP14NV


    SPECIFICATIONS
    M16x2 Valve, 1/4", 18 NPTF, Viton, Stainless Steel,
       
    These high quality, brass, leak-proof gauge plugs are suitable for installation on any pressurized lubricant point.
    P/N: GP14NV

    $70.27 
       
  • KP series push button sampling valve (Viton/Stainless/Locknut), 1/4" NPT
    KP series push button sampling valve (Viton/Stainless/Locknut), 1/4" NPT

    KP series push button sampling valve (Viton/Stainless/Locknut), 1/4" NPT

    $124.13
    P/N: KPL14NV-R

    The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

    SPECIFICATIONS
    Body Component: Stainless Steel, Button/Spout/Cap: Stainless, Seals: Viton, Spring: Stainless, Thread Size: 1/4" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
       
    The KP Series Sampling valve allows for sample taking at the "push of a button".
    P/N: KPL14NV-R

    $124.13 
       
  • KP series push button sampling valve (Viton/Stainless), 1/8" NPT
    KP series push button sampling valve (Viton/Stainless), 1/8" NPT

    KP series push button sampling valve (Viton/Stainless), 1/8" NPT

    $108.98
    P/N: KP18NV-R

    The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

    SPECIFICATIONS
    Body Component: Stainless Steel, Button/Spout/Cap: Stainless, Seals: Viton, Spring: Stainless, Thread Size: 1/8" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
       
    The KP Series Sampling valve allows for sample taking at the "push of a button".
    P/N: KP18NV-R

    $108.98 
       
  • KST series probe, 1/4" NPTF, viton
    KST series probe, 1/4" NPTF, viton

    KST series probe, 1/4" NPTF, viton

    $21.82
    P/N: KST14N-VC

    The KST Sample valves are suitable for mobile and marine applications, and their unique design makes them suitable for use with the probalizer-style vacuum sampling pump for taking rapid and accurate oil analysis samples.

    SPECIFICATIONS
    Thread Size: 1/4" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F), Seals: Viton
       
    The KST Series Sampling valve works hand-in-hand with the probalizer-style vacuum sample pump.
    P/N: KST14N-VC

    $21.82 
       
  • Vacuum Sample Pump (Vacuum Release Valve)
    Vacuum Sample Pump (Vacuum Release Valve)

    Vacuum Sample Pump (Vacuum Release Valve)

    $65.32
    P/N: SP38-XV


       
    These pumps will generate in excess of 27 inches of Hg, suitable for sampling of viscous fluids (i.e. oils).
    P/N: SP38-XV

    $65.32 
       
  • Vacuum Sample Pump (Acrylic head)
    Vacuum Sample Pump (Acrylic head)

    Vacuum Sample Pump (Acrylic head)

    $80.70
    P/N: SP38-U


       
    These pumps will generate in excess of 27 inches of Hg, suitable for sampling of viscous fluids (i.e. oils).
    P/N: SP38-U

    $80.70 
       
  • LT Sample Probe with Barb for 5/16" OD Disposable Tubing
    LT Sample Probe with Barb for 5/16" OD Disposable Tubing

    LT Sample Probe with Barb for 5/16" OD Disposable Tubing

    $35.49
    P/N: SLF5


       
  • Sampling Port Extension Hose Assembly
    Sampling Port Extension Hose Assembly

    Sampling Port Extension Hose Assembly

    $79.35
    P/N: SPEHKP01


       
    P/N: SPEHKP01

    $79.35 
       
  • 1oz Test Cup (tube of 100)
    1oz Test Cup (tube of 100)

    1oz Test Cup (tube of 100)

    $1.40
    P/N: APCSC100


       
    1 oz Graduated Medicine cup (packed in a tube of 100 cups).
    P/N: APCSC100

    $1.40 
       
  • 12" Steel, 1/4" NPT, rigid, stainless steel
    12" Steel, 1/4" NPT, rigid, stainless steel

    12" Steel, 1/4" NPT, rigid, stainless steel

    $180.83
    P/N: B14NRTR12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 30cm (12"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: stainless steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request,...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: B14NRTR12

    $180.83 
       
  • Fluid Level Sight Glass - 1" NPT
    Fluid Level Sight Glass - 1" NPT

    Fluid Level Sight Glass - 1" NPT

    $13.78
    P/N: SLW-16


    SPECIFICATIONS
    Thread Sizes: 1" NPT, Outside Diameter: 0.94", Length from last Thread: 0.32"
       
    Fluid Level Sight Glasses
    P/N: SLW-16

    $13.78 
       
  • 14" Steel, 1/4" NPT, rigid (stainless tube)
    14" Steel, 1/4" NPT, rigid (stainless tube)

    14" Steel, 1/4" NPT, rigid (stainless tube)

    $77.39
    P/N: B14NTR24

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 30cm (24"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: B14NTR24

    $77.39 
       
  • 12" Steel, 1/4" NPT, swivel (stainless tube)
    12" Steel, 1/4" NPT, swivel (stainless tube)

    12" Steel, 1/4" NPT, swivel (stainless tube)

    $76.59
    P/N: B14NTRS12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 30cm (12"), Adapter: Swivel 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: B14NTRS12

    $76.59 
       
  • Pressureless Valve Mount 1-1/4" (for Pipe)
    Pressureless Valve Mount 1-1/4" (for Pipe)

    Pressureless Valve Mount 1-1/4" (for Pipe)

    $549.67
    P/N: VM2-P114

    Valve Mounts are an ingenious way of getting around the conundrum of sampling from the system return line. On pressurized systems with a reservoir the recommendation is to sample from the return line. The irony is that the return line is, in almost all instances, devoid of any ports, or an easy place to...

    SPECIFICATIONS
    Pipe Opening: 1-1/4", Height: 4.72" (120 mm), Width: 2.56" (65 mm), Housing: Steel, Sealing Shell: Steel, Seal: Viton, Measuring Needle: Steel, Maximum Operating Pressure: 9000 PSI, Maximum Sampling Pressure: 6000 PSI, Pipe Requirements Seamless drawn steel pipes made out of ST...
       
    Valve Mounts allow for the easy installation of a sampling port on existing return lines.
    P/N: VM2-P114

    $549.67 
       
  • KP series push button sampling valve
    KP series push button sampling valve

    KP series push button sampling valve

    $69.95
    P/N: KP022

    The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

    SPECIFICATIONS
    Body Component: Carbon Steel, Button/Spout/Cap: Brass, Seals: Viton, Spring: Carbon Steel, Thread Size: 1/8" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
       
    The KP Series Sampling valve allows for sample taking at the "push of a button".
    P/N: KP022

    $69.95 
       
  • Gauge Plug - 1/4" NPT (Stainless Steel)
    Gauge Plug - 1/4" NPT (Stainless Steel)

    Gauge Plug - 1/4" NPT (Stainless Steel)

    $62.81
    P/N: B14N-R


    SPECIFICATIONS
    max pressure: 9000 PSI, material: stainless steel, o-rings: nitrile, thread size: 1/4" NPT
       
    These high quality, leak-proof gauge plugs are suitable for installation on any pressurized lubricant point.
    P/N: B14N-R

    $62.81 
       
  • 36" Stainless Steel, high flow, 1/4" NPT, rigid
    36" Stainless Steel, high flow, 1/4" NPT, rigid

    36" Stainless Steel, high flow, 1/4" NPT, rigid

    $204.27
    P/N: L14NRTR36

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 90cm (36"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless-steel, Sample Test Port: stainless-steel, Seals Standard: Viton (FPM) - EPDM, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NRTR36

    $204.27 
       
  • 24" Stainless Steel, high flow, 1/4" NPT, rigid
    24" Stainless Steel, high flow, 1/4" NPT, rigid

    24" Stainless Steel, high flow, 1/4" NPT, rigid

    $181.38
    P/N: L14NRTR24

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 60cm (24"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless-steel, Sample Test Port: stainless-steel, Seals Standard: Viton (FPM) - EPDM, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NRTR24

    $181.38 
       
  • 18" Stainless Steel, high flow, 1/4" NPT, rigid
    18" Stainless Steel, high flow, 1/4" NPT, rigid

    18" Stainless Steel, high flow, 1/4" NPT, rigid

    $177.01
    P/N: L14NRTR18

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 45cm (18"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless-steel, Sample Test Port: stainless-steel, Seals Standard: Viton (FPM) - EPDM, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NRTR18

    $177.01 
       
  • 12" Stainless Steel, high flow, 1/4" NPT, rigid
    12" Stainless Steel, high flow, 1/4" NPT, rigid

    12" Stainless Steel, high flow, 1/4" NPT, rigid

    $172.63
    P/N: L14NRTR12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 30cm (12"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless-steel, Sample Test Port: stainless-steel, Seals Standard: Viton (FPM) - EPDM, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NRTR12

    $172.63 
       
  • Oil Sample Service Kit
    Oil Sample Service Kit

    Oil Sample Service Kit

    $117.60
    P/N: OA-SRVC-K1

    The Lubrigard Oil Sampling Service Kit is the complete solution for your portable oil sampling needs. Simply add your oil analysis samples kits to this durable travel case and you have everything you need to take oil samples in the field.

       
    The oil sampling service kit comes complete with a sampling pump, pump case, 24 feet of tubing, and a tubing cutter all in a portable and durable industrial plastic case.
    P/N: OA-SRVC-K1

    $117.60 
       
  • Dipslide Culture Test Kits (10 tests)
    Dipslide Culture Test Kits (10 tests)

    Dipslide Culture Test Kits (10 tests)

    $34.54
    P/N: MC-600

    Microorganisms are responsible for enormous economic losses to industry. Microorganisms and their metabolic products accumulate in water, transportation fuels, petroleum products and industrial fluids resulting in alteration of their physical and chemical properties. This can cause obstruction of fluid...

    SPECIFICATIONS
    Number of Test Kits: 10, Media: Nutrient Agar w/TTC /MALT EXTRACT AGAR
       
    Dipslide Culture Test kits - Nutrient Agar - TTC Malt Extract Agar.
    P/N: MC-600

    $34.54 
       
  • Hi-pressure crimped hose with vent cap
    Hi-pressure crimped hose with vent cap

    Hi-pressure crimped hose with vent cap

    $49.75
    P/N: VHBF


    SPECIFICATIONS
    B Series M16x2 High Pressure Probe Assembly, 250 psi to 3,500 psi
       
    For use with all standard Pitot tubes
    P/N: VHBF

    $49.75 
       
  • Tube Cutter (1/8" - 1-1/8")
    Tube Cutter (1/8" - 1-1/8")

    Tube Cutter (1/8" - 1-1/8")

    $43.27
    P/N: TC-1000


       
    For use with all standard Pitot tubes
    P/N: TC-1000

    $43.27 
       
  • Mini Tube Cutter (1/8" - 5/8")
    Mini Tube Cutter (1/8" - 5/8")

    Mini Tube Cutter (1/8" - 5/8")

    $21.16
    P/N: TC-1050


       
    Tube cutter for use with standard pitot tubes. Will cut 1/8" - 5/8" tubing.
    P/N: TC-1050

    $21.16 
       
  • 18" Steel, high flow, 1/4" NPT, swivel
    18" Steel, high flow, 1/4" NPT, swivel

    18" Steel, high flow, 1/4" NPT, swivel

    $61.20
    P/N: L14NTS18

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 45cm (18"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NTS18

    $61.20 
       
  • 18" Steel, 1/4" NPT, rigid
    18" Steel, 1/4" NPT, rigid

    18" Steel, 1/4" NPT, rigid

    $55.68
    P/N: B14NT18

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 45cm (18"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request,...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: B14NT18

    $55.68 
       
  • 18" Steel, 1/4" NPT, swivel
    18" Steel, 1/4" NPT, swivel

    18" Steel, 1/4" NPT, swivel

    $71.99
    P/N: B14NTS18

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 45cm (18"), pter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: B14NTS18

    $71.99 
       
 
  •  
  •  
Sample Bottle

Sample Bottle

$0.75
P/N: CBP100


   
Sample Tubing (1/4" O.D.)

Sample Tubing (1/4" O.D.)

$0.37
P/N: PT44

This sample tubing can be used with all Lubrigard vacuum sample pumps, and with other sampling hardware that requires replaceable plastic tubing.

   
Sample Mailer Container & Sample Bottle

Sample Mailer Container & Sample Bottle

$2.59
P/N: BLC1


SPECIFICATIONS
Mailing container and 100 mL oil sampling bottle.
   
Vacuum Sample Pump

Vacuum Sample Pump

$29.78
P/N: SP38


   
24" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Swivel

24" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Swivel

$76.90
P/N: L14NTRS24

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: Stainless Steel (24"), Adapter: Swivel 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to...
   
Lo-Pressure sampling hose (Hi-Visc)

Lo-Pressure sampling hose (Hi-Visc)

$32.25
P/N: SLF4


   
Sample Tubing (3/16" O.D.)

Sample Tubing (3/16" O.D.)

$0.50
P/N: PT33

This sample tubing can be used with all Lubrigard vacuum sample pumps, and with other sampling hardware that requires replaceable plastic tubing.

   
12" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

12" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

$58.98
P/N: L14NTR12

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 45cm Stainless Steel (12"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to...
   
Gauge Plug - 1/4" NPT

Gauge Plug - 1/4" NPT

$13.10
P/N: GP14


SPECIFICATIONS
max pressure: 9000 PSI, materials:, Metal Parts: Steel, Ball: Stainless Steel, Seals: Standard FPM-Viton Temperatur Range -4°F to +392°F (-20°C to +200°C), thread size: 1/4" NPT
   
12" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Swivel

12" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Swivel

$68.16
P/N: L14NTRS12

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: Stainless Steel (12"), Adapter: Swivel 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to...
   
18" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

18" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

$63.36
P/N: L14NTR18

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 45cm Stainless Steel (18"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to...
   
KP series push button sampling valve, 1/4" NPT

KP series push button sampling valve, 1/4" NPT

$31.11
P/N: KP14N

The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

SPECIFICATIONS
Body Component: Carbon Steel, Button/Spout/Cap: Brass, Seals: Viton, Spring: Carbon Steel, Thread Size: 1/4" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
   
1/4"B Thread Together Probe w/1/4"Tubing

1/4"B Thread Together Probe w/1/4"Tubing

$13.97
P/N: SBF4


   
KP series push button sampling valve, 1/8" NPT

KP series push button sampling valve, 1/8" NPT

$31.11
P/N: KP18N

The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

SPECIFICATIONS
Body Component: Carbon Steel, Button/Spout/Cap: Brass, Seals: Viton, Spring: Carbon Steel, Thread Size: 1/8" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
   
L Series hi-viscosity, 1/4" NPT

L Series hi-viscosity, 1/4" NPT

$28.77
P/N: L14NC


   
3-way stop-cock

3-way stop-cock

$4.76
P/N: POP96652


   
Vacuum Sample Pump

Vacuum Sample Pump

$27.97
P/N: SP38PR

This pump will generate in excess of 27 inches of Hg, suitable for sampling of viscous fluids (i.e. oils), and is equipped with a probalyzer style needle valve suitable for sampling from pressurized components equipped with the mini-gauge plug.

   
KST series probe, 1/8" NPTF

KST series probe, 1/8" NPTF

$21.82
P/N: KST18N

The KST Sample valves are suitable for mobile and marine applications, and their unique design makes them suitable for use with the probalizer-style vacuum sampling pump for taking rapid and accurate oil analysis samples.

SPECIFICATIONS
Thread Size: 1/8" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
   
24" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

24" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

$67.74
P/N: L14NTR24

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: Stainless Steel 24", Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to +392°F)
   
12" Steel, 1/4" NPT, rigid (stainless tube)

12" Steel, 1/4" NPT, rigid (stainless tube)

$62.20
P/N: B14NTR12

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 30cm (12"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature...
   
48" Steel, 1/4" NPT, rigid (Stainless Tube)

48" Steel, 1/4" NPT, rigid (Stainless Tube)

$116.87
P/N: B14NTR48

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 48", Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range:...
   
24" Steel, 1/4" NPT, rigid

24" Steel, 1/4" NPT, rigid

$57.06
P/N: B14NT24

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 60cm (24"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request,...
   
12" Steel, high flow, 1/4" NPT Thread, Rigid, 5/16 OD SS Tube

12" Steel, high flow, 1/4" NPT Thread, Rigid, 5/16 OD SS Tube

$70.78
P/N: L14N5TR12

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 30cm (12"), Adapter: Fixed 1/4" Male NPT, OD: 5/16", Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F...
   
KST series probe, 1/4" NPTF

KST series probe, 1/4" NPTF

$21.82
P/N: KST14N

The KST Sample valves are suitable for mobile and marine applications, and their unique design makes them suitable for use with the probalizer-style vacuum sampling pump for taking rapid and accurate oil analysis samples.

SPECIFICATIONS
Thread Size: 1/4" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
   
12" Steel, 1/4" NPT, swivel

12" Steel, 1/4" NPT, swivel

$68.69
P/N: B14NTS12

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 30cm (12"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request,...
   
Hi-pressure Sampling System with Needle Valve

Hi-pressure Sampling System with Needle Valve

$144.37
P/N: SHHPNV01

The Lubrigard Hi-pressure Sampling System incorporates a needle valve into the sampling line to allow metering of the pressure at the sample side. This system is very useful for sampling systems with variable high pressures (i.e. injection moulding, presses).

   
L High Flow Valve with 3/4" NPT, 3D Sight Glass, Swivel, 12"SS Tube

L High Flow Valve with 3/4" NPT, 3D Sight Glass, Swivel, 12"SS Tube

$100.54
P/N: L12NATRS12

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 45cm Stainless Steel (12"), Adapter: 3/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to +392°F)
   
36" Stainless Steel, 1/4" NPT, rigid

36" Stainless Steel, 1/4" NPT, rigid

$99.06
P/N: B14NTR36

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 36", Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range:...
   
24" Stainless Steel, high flow, 1/4" NPT, swivel

24" Stainless Steel, high flow, 1/4" NPT, swivel

$202.95
P/N: L14NRTRS24

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 61cm (24"), Adapter: Swivel 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless-steel, Sample Test Port: stainless-steel, Seals Standard: Viton (FPM) - EPDM, Temperature Range: -20°C to +200°C (-4°F to +392°F)
   
1/4" Swivel Handle Tube Bender (LT-Series)

1/4" Swivel Handle Tube Bender (LT-Series)

$91.11
P/N: PTB01


   
24" Steel, 1/4" NPT, swivel

24" Steel, 1/4" NPT, swivel

$73.36
P/N: B14NTS24

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 60cm (24"), pter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature...
   
12" Stainless Steel, high flow, 1/4" NPT, swivel

12" Stainless Steel, high flow, 1/4" NPT, swivel

$194.21
P/N: L14NRTRS12

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 30cm (12"), Adapter: 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless-steel, Sample Test Port: stainless-steel, Seals Standard: Viton (FPM) - EPDM, Temperature Range: -20°C to +200°C (-4°F to +392°F)
   
Vacuum Sample Pump

Vacuum Sample Pump

$92.36
P/N: SP48U


   
Disposable probe tube cap

Disposable probe tube cap

$2.52
P/N: SVP

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 30cm (12"),
   
KST series probe

KST series probe

$9.24
P/N: KPB4


   
Cabinet Base Configuration with integrated 0,18 cc pump, without instruments for 230/400V 50/60Hz 3P

Cabinet Base Configuration with integrated 0,18 cc pump, without instruments for 230/400V 50/60Hz 3P

$3,742.20
P/N: CMC2AA1A111


   
Plate Mounted Base Configuration with integrated 0.18 cc pump, without instruments for 230/400V 50/6

Plate Mounted Base Configuration with integrated 0.18 cc pump, without instruments for 230/400V 50/6

$3,234.42
P/N: CMC1AA10111


   
Flow Control Assembly for CMS: 0,20 l/min, 1/4”BSP_m inlet, MINIMESS outlet, HEX body, 14-420 bar

Flow Control Assembly for CMS: 0,20 l/min, 1/4”BSP_m inlet, MINIMESS outlet, HEX body, 14-420 bar

$220.50
P/N: 9400602


   
RS485 to USB converter - 24vdc power supply

RS485 to USB converter - 24vdc power supply

$608.58
P/N: CMS-USBi


   
No Moisture sensor, for phosphate ester and aggressive fluids, display, customizable relay, M16x2 co

No Moisture sensor, for phosphate ester and aggressive fluids, display, customizable relay, M16x2 co

$4,260.06
P/N: CMS0SKRG1-2


   
No Moisture sensor, for offshore and selected water based fluids, display, customizable relay, M16x2

No Moisture sensor, for offshore and selected water based fluids, display, customizable relay, M16x2

$3,931.20
P/N: CMS0NKRG1-2


   
Moisture sensor, for mineral fluid, no display, customizable relay, M16x2 connection, ATEX ZONE II C

Moisture sensor, for mineral fluid, no display, customizable relay, M16x2 connection, ATEX ZONE II C

$17,144.82
P/N: CMSWM0RG1AZ2-2


   
Moisture sensor, for mineral fluid, display, customizable relay, M16x2 connection, flow control asse

Moisture sensor, for mineral fluid, display, customizable relay, M16x2 connection, flow control asse

$3,906.00
P/N: CMSWMKRG1FC1-2


   
CMS remote display unit with keypad

CMS remote display unit with keypad

$1,575.00
P/N: CMS-RDU2


   
Moisture sensor, for mineral fluid, no display, customizable relay, M16x2 connection

Moisture sensor, for mineral fluid, no display, customizable relay, M16x2 connection

$3,184.02
P/N: CMSWM0RG1-2


   
No Moisture sensor, for mineral fluid, display, customizable relay, M16x2 connection

No Moisture sensor, for mineral fluid, display, customizable relay, M16x2 connection

$3,255.84
P/N: CMS0MKRG1-2


   
No Moisture sensor, for mineral fluid, no display, customizable relay, M16x2 connection

No Moisture sensor, for mineral fluid, no display, customizable relay, M16x2 connection

$2,754.26
P/N: CMS0M0RG1-2


   
Moisture sensor, for mineral fluid, display, customizable relay, M16x2 connection

Moisture sensor, for mineral fluid, display, customizable relay, M16x2 connection

$3,684.25
P/N: CMSWMKRG1-2


   
36" Steel, 1/4" NPT, swivel (stainless tube)

36" Steel, 1/4" NPT, swivel (stainless tube)

$115.43
P/N: B14NTRS36

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 36", Adapter: Swivel 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range:...
   
60" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Swivel

60" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Swivel

$137.04
P/N: L14NTRS60

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: Stainless Steel (60"), Adapter: Swivel 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to...
   
KST series probe, 1/2" NPTF, Steel

KST series probe, 1/2" NPTF, Steel

$25.90
P/N: KST8NC

The KST Sample valves are suitable for mobile and marine applications, and their unique design makes them suitable for use with the probalizer-style vacuum sampling pump for taking rapid and accurate oil analysis samples.

SPECIFICATIONS
Thread Size: 1/2" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
   
KST series probe, 3/8" NPTF, Steel

KST series probe, 3/8" NPTF, Steel

$25.23
P/N: KST6NC

The KST Sample valves are suitable for mobile and marine applications, and their unique design makes them suitable for use with the probalizer-style vacuum sampling pump for taking rapid and accurate oil analysis samples.

SPECIFICATIONS
Thread Size: 3/8" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
   
Fluid Level Sight Glass - 1/2" NPT

Fluid Level Sight Glass - 1/2" NPT

$9.27
P/N: SLW-08


SPECIFICATIONS
Thread Sizes: 1/2" NPT,
   
M Series M16x2 Probe Adapter with Barb for 1/4" OD Disposable Tubing

M Series M16x2 Probe Adapter with Barb for 1/4" OD Disposable Tubing

$32.25
P/N: SMF4


   
Motor Control Board, Dual (SMCB2)

Motor Control Board, Dual (SMCB2)

$804.53
P/N: CS-MCB2

CS-APC-2 Genuine Spare Parts

SPECIFICATIONS
Motor control board for CINRG CS-APC-2 syringe pump.
   
VITON TUBING  1/4" OD 1/8" ID  (1 foot)

VITON TUBING  1/4" OD 1/8" ID (1 foot)

$7.75
P/N: CS-T1418-1

CS-APC-2 Genuine Spare Parts

SPECIFICATIONS
Sample Needle for CS-HVA-1
   
PTFE TUBING 1/8" ID X 0.085" ID (25FT x 2.15MM)

PTFE TUBING 1/8" ID X 0.085" ID (25FT x 2.15MM)

$95.40
P/N: CS-T18085-25

CS-APC-2 Genuine Spare Parts

SPECIFICATIONS
Sample Needle for CS-HVA-1
   
FLANGED NUT/WASHER 1/8" (10 PIECES)

FLANGED NUT/WASHER 1/8" (10 PIECES)

$46.32
P/N: CS-W18-10

CS-APC-2 Genuine Spare Parts

SPECIFICATIONS
Sample Needle for CS-HVA-1
   
25ml SYRINGE

25ml SYRINGE

$1,272.00
P/N: CS-S25

CS-APC-2 Genuine Spare Parts

SPECIFICATIONS
Sample Needle for CS-HVA-1
   
24V DC Motor and Gearbox Combination

24V DC Motor and Gearbox Combination

$333.52
P/N: CS-M24GB

CS-APC-2 Genuine Spare Parts

SPECIFICATIONS
Sample Needle for CS-HVA-1
   
Sample Needle for CS-HVA-1

Sample Needle for CS-HVA-1

$300.00
P/N: CS-HVA-SN-01

Sample uptake needle for CINRG Houillon Viscometer Automation system

SPECIFICATIONS
Sample Needle for CS-HVA-1
   
High Flow L Valve, 1/4" -18 NPTF, Swivel w/ 18" SS Tube

High Flow L Valve, 1/4" -18 NPTF, Swivel w/ 18" SS Tube

$72.53
P/N: L14NTRS18

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

   
Fast Sampler Upgrade Kit

Fast Sampler Upgrade Kit

$7,400.00
P/N: CS-FSU-1


   
24" Steel, 1/4" NPT, swivel (stainless tube)

24" Steel, 1/4" NPT, swivel (stainless tube)

$85.35
P/N: B14NTRS24

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 24", Adapter: Swivel 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range:...