Email Us

  info.sales@lubrigard.com

SHOP BY

  • Filter By Sub Category
    Oil Analysis Kits
    Sampling Hardware
    Instrumentation
  • MANUFACTURER
    WearCheck
    Lubrigard
    Des-Case
    MP Filtri
    CINRG Systems Inc.
    Luneta
    Baumer
    Stauff
    Klotz
    CheckFluid
    Solar-Cult
    Kittiwake
 Reset Filters
 
  •  
  •  
per page
  • Sample Bottle
    Sample Bottle

    Sample Bottle

    $0.75
    P/N: CBP100


       
    This 100 ml high-density polymer sample bottle is clear and resists both high temperature and pressure and is suitable for oils, fuels and other liquids.
    P/N: CBP100

    $0.75 
       
  • Sample Tubing (1/4" O.D.)
    Sample Tubing (1/4" O.D.)

    Sample Tubing (1/4" O.D.)

    $0.37
    P/N: PT44

    This sample tubing can be used with all Lubrigard vacuum sample pumps, and with other sampling hardware that requires replaceable plastic tubing.

       
    1/4" OD (3/16" ID) hard LDPE tubing (SOLD PER FOOT)
    P/N: PT44

    $0.37 
       
  • Sample Mailer Container & Sample Bottle
    Sample Mailer Container & Sample Bottle

    Sample Mailer Container & Sample Bottle

    $2.59
    P/N: BLC1


    SPECIFICATIONS
    Mailing container and 100 mL oil sampling bottle.
       
    Mailing container and 100 mL oil sampling bottle.
    P/N: BLC1

    $2.59 
       
  • Vacuum Sample Pump
    Vacuum Sample Pump

    Vacuum Sample Pump

    $29.78
    P/N: SP38


       
    These pumps will generate in excess of 27 inches of Hg, suitable for sampling of viscous fluids (i.e. oils).
    P/N: SP38

    $29.78 
       
  • 24" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Swivel
    24" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Swivel

    24" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Swivel

    $76.90
    P/N: L14NTRS24

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: Stainless Steel (24"), Adapter: Swivel 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NTRS24

    $76.90 
       
  • Lo-Pressure sampling hose (Hi-Visc)
    Lo-Pressure sampling hose (Hi-Visc)

    Lo-Pressure sampling hose (Hi-Visc)

    $32.25
    P/N: SLF4


       
    P/N: SLF4

    $32.25 
       
  • Sample Tubing (3/16" O.D.)
    Sample Tubing (3/16" O.D.)

    Sample Tubing (3/16" O.D.)

    $0.50
    P/N: PT33

    This sample tubing can be used with all Lubrigard vacuum sample pumps, and with other sampling hardware that requires replaceable plastic tubing.

       
    3/16" OD tubing (SOLD PER FOOT)
    P/N: PT33

    $0.50 
       
  • Hi-pressure Sampling Hose
    Hi-pressure Sampling Hose

    Hi-pressure Sampling Hose

    $15.82
    P/N: SHHP01


       
    These hose assemblies are suitable for taking oil samples from high pressure systems equipped with standard gauge plugs.
    P/N: SHHP01

    $15.82 
       
  • 12" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid
    12" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

    12" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

    $58.98
    P/N: L14NTR12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 45cm Stainless Steel (12"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NTR12

    $58.98 
       
  • Gauge Plug - 1/4" NPT
    Gauge Plug - 1/4" NPT

    Gauge Plug - 1/4" NPT

    $13.10
    P/N: GP14


    SPECIFICATIONS
    max pressure: 9000 PSI, materials:, Metal Parts: Steel, Ball: Stainless Steel, Seals: Standard FPM-Viton Temperatur Range -4°F to +392°F (-20°C to +200°C), thread size: 1/4" NPT
       
    These high quality, brass, leak-proof gauge plugs are suitable for installation on any pressurized lubricant point.
    P/N: GP14

    $13.10 
       
  • 12" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Swivel
    12" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Swivel

    12" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Swivel

    $68.16
    P/N: L14NTRS12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: Stainless Steel (12"), Adapter: Swivel 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NTRS12

    $68.16 
       
  • 18" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid
    18" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

    18" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

    $63.36
    P/N: L14NTR18

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 45cm Stainless Steel (18"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NTR18

    $63.36 
       
  • KP series push button sampling valve, 1/4" NPT
    KP series push button sampling valve, 1/4" NPT

    KP series push button sampling valve, 1/4" NPT

    $31.11
    P/N: KP14N

    The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

    SPECIFICATIONS
    Body Component: Carbon Steel, Button/Spout/Cap: Brass, Seals: Viton, Spring: Carbon Steel, Thread Size: 1/4" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
       
    The KP Series Sampling valve allows for sample taking at the "push of a button".
    P/N: KP14N

    $31.11 
       
  • Gauge Plug - 1/8" NPT
    Gauge Plug - 1/8" NPT

    Gauge Plug - 1/8" NPT

    $13.10
    P/N: GP18


    SPECIFICATIONS
    max pressure: 9000 PSI, materials:, Metal Parts: Steel, Ball: Stainless Steel, Seals: Standard FPM-Viton Temperatur Range -4°F to +392°F (-20°C to +200°C), thread size: 1/8" NPT
       
    These high quality, brass, leak-proof gauge plugs are suitable for installation on any pressurized lubricant point.
    P/N: GP18

    $13.10 
       
  • 1/4"B Thread Together Probe w/1/4"Tubing
    1/4"B Thread Together Probe w/1/4"Tubing

    1/4"B Thread Together Probe w/1/4"Tubing

    $13.97
    P/N: SBF4


       
  • KP series push button sampling valve, 1/8" NPT
    KP series push button sampling valve, 1/8" NPT

    KP series push button sampling valve, 1/8" NPT

    $31.11
    P/N: KP18N

    The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

    SPECIFICATIONS
    Body Component: Carbon Steel, Button/Spout/Cap: Brass, Seals: Viton, Spring: Carbon Steel, Thread Size: 1/8" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
       
    The KP Series Sampling valve allows for sample taking at the "push of a button".
    P/N: KP18N

    $31.11 
       
  • L Series hi-viscosity, 1/4" NPT
    L Series hi-viscosity, 1/4" NPT

    L Series hi-viscosity, 1/4" NPT

    $28.77
    P/N: L14NC


       
    P/N: L14NC

    $28.77 
       
  • 3-way stop-cock
    3-way stop-cock

    3-way stop-cock

    $3.50
    P/N: POP96652


       
    3-way Stop-Cock for Dissolved-gas analysis syringe.
    P/N: POP96652

    $3.50 
       
  • 30cc Matched and Serialized Glass Syringe
    30cc Matched and Serialized Glass Syringe

    30cc Matched and Serialized Glass Syringe

    $105.20
    P/N: POP5147


       
    Dissolved-gas analysis syringe.
    P/N: POP5147

    $105.20 
       
  • Lo-pressure Sampling Hose
    Lo-pressure Sampling Hose

    Lo-pressure Sampling Hose

    $18.35
    P/N: SHLP01


       
    These hose assemblies are suitable for taking oil samples from low pressure systems equipped with standard gauge plugs.
    P/N: SHLP01

    $18.35 
       
  • Vacuum Sample Pump
    Vacuum Sample Pump

    Vacuum Sample Pump

    $25.39
    P/N: SP38PR

    This pump will generate in excess of 27 inches of Hg, suitable for sampling of viscous fluids (i.e. oils), and is equipped with a probalyzer style needle valve suitable for sampling from pressurized components equipped with the mini-gauge plug.

       
    Oil Sampling Pump suitable for vacuum or probalyzer sampling.
    P/N: SP38PR

    $25.39 
       
  • Gearbox Adapter Body Only
    Gearbox Adapter Body Only

    Gearbox Adapter Body Only

    $64.55
    P/N: 10001240


    SPECIFICATIONS
    Gearbox Adapter Body Only
       
    Gearbox Adapter Body Only
    P/N: 10001240

    $64.55 
       
  • KST series probe, 1/8" NPTF
    KST series probe, 1/8" NPTF

    KST series probe, 1/8" NPTF

    $21.82
    P/N: KST18N

    The KST Sample valves are suitable for mobile and marine applications, and their unique design makes them suitable for use with the probalizer-style vacuum sampling pump for taking rapid and accurate oil analysis samples.

    SPECIFICATIONS
    Thread Size: 1/8" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
       
    The KST Series Sampling valve works hand-in-hand with the probalizer-style vacuum sample pump.
    P/N: KST18N

    $21.82 
       
  • 24" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid
    24" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

    24" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

    $67.74
    P/N: L14NTR24

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: Stainless Steel 24", Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NTR24

    $67.74 
       
  • 12" Steel, 1/4" NPT, rigid (stainless tube)
    12" Steel, 1/4" NPT, rigid (stainless tube)

    12" Steel, 1/4" NPT, rigid (stainless tube)

    $62.20
    P/N: B14NTR12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 30cm (12"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: B14NTR12

    $62.20 
       
  • 48" Steel, 1/4" NPT, rigid (Stainless Tube)
    48" Steel, 1/4" NPT, rigid (Stainless Tube)

    48" Steel, 1/4" NPT, rigid (Stainless Tube)

    $116.87
    P/N: B14NTR48

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 48", Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range:...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: B14NTR48

    $116.87 
       
  • 24" Steel, 1/4" NPT, rigid
    24" Steel, 1/4" NPT, rigid

    24" Steel, 1/4" NPT, rigid

    $57.06
    P/N: B14NT24

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 60cm (24"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request,...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: B14NT24

    $57.06 
       
  • 12" Steel, high flow, 1/4" NPT Thread, Rigid, 5/16 OD SS Tube
    12" Steel, high flow, 1/4" NPT Thread, Rigid, 5/16 OD SS Tube

    12" Steel, high flow, 1/4" NPT Thread, Rigid, 5/16 OD SS Tube

    $70.78
    P/N: L14N5TR12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 30cm (12"), Adapter: Fixed 1/4" Male NPT, OD: 5/16", Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14N5TR12

    $70.78 
       
  • Mini Gauge Plug - 1/8" NPT
    Mini Gauge Plug - 1/8" NPT

    Mini Gauge Plug - 1/8" NPT

    $45.00
    P/N: GP18PR


    SPECIFICATIONS
    max pressure: 9000 PSI, material: cadmium coated mild steel, thread size: 1/8" NPT, NOTE: PUMP NOT INCLUDED
       
    These high quality, brass, leak-proof gauge plugs are suitable for installation on any pressurized lubricant point.
    P/N: GP18PR

    $45.00 
       
  • KST series probe, 1/4" NPTF
    KST series probe, 1/4" NPTF

    KST series probe, 1/4" NPTF

    $21.82
    P/N: KST14N

    The KST Sample valves are suitable for mobile and marine applications, and their unique design makes them suitable for use with the probalizer-style vacuum sampling pump for taking rapid and accurate oil analysis samples.

    SPECIFICATIONS
    Thread Size: 1/4" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
       
    The KST Series Sampling valve works hand-in-hand with the probalizer-style vacuum sample pump.
    P/N: KST14N

    $21.82 
       
  • 12" Steel, 1/4" NPT, swivel
    12" Steel, 1/4" NPT, swivel

    12" Steel, 1/4" NPT, swivel

    $68.69
    P/N: B14NTS12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 30cm (12"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request,...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: B14NTS12

    $68.69 
       
  • Hi-pressure Sampling System with Needle Valve
    Hi-pressure Sampling System with Needle Valve

    Hi-pressure Sampling System with Needle Valve

    $144.37
    P/N: SHHPNV01

    The Lubrigard Hi-pressure Sampling System incorporates a needle valve into the sampling line to allow metering of the pressure at the sample side. This system is very useful for sampling systems with variable high pressures (i.e. injection moulding, presses).

       
    These hose assemblies are the safest way for taking oil samples from very high pressure systems equipped with standard gauge plugs.
    P/N: SHHPNV01

    $144.37 
       
  • L High Flow Valve with 3/4" NPT, 3D Sight Glass, Swivel, 12"SS Tube
    L High Flow Valve with 3/4" NPT, 3D Sight Glass, Swivel, 12"SS Tube

    L High Flow Valve with 3/4" NPT, 3D Sight Glass, Swivel, 12"SS Tube

    $100.54
    P/N: L12NATRS12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 45cm Stainless Steel (12"), Adapter: 3/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L12NATRS12

    $100.54 
       
  • 36" Stainless Steel, 1/4" NPT, rigid
    36" Stainless Steel, 1/4" NPT, rigid

    36" Stainless Steel, 1/4" NPT, rigid

    $99.06
    P/N: B14NTR36

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 36", Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range:...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: B14NTR36

    $99.06 
       
  • 24" Stainless Steel, high flow, 1/4" NPT, swivel
    24" Stainless Steel, high flow, 1/4" NPT, swivel

    24" Stainless Steel, high flow, 1/4" NPT, swivel

    $202.95
    P/N: L14NRTRS24

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 61cm (24"), Adapter: Swivel 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless-steel, Sample Test Port: stainless-steel, Seals Standard: Viton (FPM) - EPDM, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NRTRS24

    $202.95 
       
  • 1/4" Swivel Handle Tube Bender (LT-Series)
    1/4" Swivel Handle Tube Bender (LT-Series)

    1/4" Swivel Handle Tube Bender (LT-Series)

    $91.11
    P/N: PTB01


       
    Tube Bender for use with LT-Series pitot tubes (1/4").
    P/N: PTB01

    $91.11 
       
  • 24" Steel, 1/4" NPT, swivel
    24" Steel, 1/4" NPT, swivel

    24" Steel, 1/4" NPT, swivel

    $73.36
    P/N: B14NTS24

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 60cm (24"), pter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: B14NTS24

    $73.36 
       
  • 12" Stainless Steel, high flow, 1/4" NPT, swivel
    12" Stainless Steel, high flow, 1/4" NPT, swivel

    12" Stainless Steel, high flow, 1/4" NPT, swivel

    $194.21
    P/N: L14NRTRS12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 30cm (12"), Adapter: 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless-steel, Sample Test Port: stainless-steel, Seals Standard: Viton (FPM) - EPDM, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NRTRS12

    $194.21 
       
  • Vacuum Sample Pump
    Vacuum Sample Pump

    Vacuum Sample Pump

    $92.36
    P/N: SP48U


       
    These pumps will generate in excess of 27 inches of Hg, suitable for sampling of viscous fluids (i.e. oils).
    P/N: SP48U

    $92.36 
       
  • Disposable probe tube cap
    Disposable probe tube cap

    Disposable probe tube cap

    $2.52
    P/N: SVP

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 30cm (12"),
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can
    P/N: SVP

    $2.52 
       
  • KST series probe
    KST series probe

    KST series probe

    $9.24
    P/N: KPB4


       
    Compact Brass button probe. KST Brass 90 deg button probe with barb for 1/4" OD (3/16" ID) PVC tubing
    P/N: KPB4

    $9.24 
       
  • Fluid Level Sight Glass - 1/2" NPT
    Fluid Level Sight Glass - 1/2" NPT

    Fluid Level Sight Glass - 1/2" NPT

    $9.27
    P/N: SLW-08


    SPECIFICATIONS
    Thread Sizes: 1/2" NPT,
       
    Fluid Level Sight Glasses
    P/N: SLW-08

    $9.27 
       
  • M Series M16x2 Probe Adapter with Barb for 1/4" OD Disposable Tubing
    M Series M16x2 Probe Adapter with Barb for 1/4" OD Disposable Tubing

    M Series M16x2 Probe Adapter with Barb for 1/4" OD Disposable Tubing

    $32.25
    P/N: SMF4


       
  • Motor Control Board, Dual (SMCB2)
    Motor Control Board, Dual (SMCB2)

    Motor Control Board, Dual (SMCB2)

    $804.53
    P/N: CS-MCB2

    CS-APC-2 Genuine Spare Parts

    SPECIFICATIONS
    Motor control board for CINRG CS-APC-2 syringe pump.
       
    CS-APC-2 Genuine Spare Parts
    P/N: CS-MCB2

    $804.53 
       
  • VITON TUBING  1/4" OD 1/8" ID  (1 foot)
    VITON TUBING  1/4" OD 1/8" ID  (1 foot)

    VITON TUBING  1/4" OD 1/8" ID (1 foot)

    $7.75
    P/N: CS-T1418-1

    CS-APC-2 Genuine Spare Parts

    SPECIFICATIONS
    Sample Needle for CS-HVA-1
       
    CS-APC-2 Genuine Spare Parts
    P/N: CS-T1418-1

    $7.75 
       
  • PTFE TUBING 1/8" ID X 0.085" ID (25FT x 2.15MM)
    PTFE TUBING 1/8" ID X 0.085" ID (25FT x 2.15MM)

    PTFE TUBING 1/8" ID X 0.085" ID (25FT x 2.15MM)

    $95.40
    P/N: CS-T18085-25

    CS-APC-2 Genuine Spare Parts

    SPECIFICATIONS
    Sample Needle for CS-HVA-1
       
    CS-APC-2 Genuine Spare Parts
    P/N: CS-T18085-25

    $95.40 
       
  • FLANGED NUT/WASHER 1/8" (10 PIECES)
    FLANGED NUT/WASHER 1/8" (10 PIECES)

    FLANGED NUT/WASHER 1/8" (10 PIECES)

    $46.32
    P/N: CS-W18-10

    CS-APC-2 Genuine Spare Parts

    SPECIFICATIONS
    Sample Needle for CS-HVA-1
       
    CS-APC-2 Genuine Spare Parts
    P/N: CS-W18-10

    $46.32 
       
  • 25ml SYRINGE
    25ml SYRINGE

    25ml SYRINGE

    $1,272.00
    P/N: CS-S25

    CS-APC-2 Genuine Spare Parts

    SPECIFICATIONS
    Sample Needle for CS-HVA-1
       
    CS-APC-2 Genuine Spare Parts
    P/N: CS-S25

    $1,272.00 
       
  • 24V DC Motor and Gearbox Combination
    24V DC Motor and Gearbox Combination

    24V DC Motor and Gearbox Combination

    $333.52
    P/N: CS-M24GB

    CS-APC-2 Genuine Spare Parts

    SPECIFICATIONS
    Sample Needle for CS-HVA-1
       
    CS-APC-2 Genuine Spare Parts
    P/N: CS-M24GB

    $333.52 
       
  • Sample Needle for CS-HVA-1
    Sample Needle for CS-HVA-1

    Sample Needle for CS-HVA-1

    $300.00
    P/N: CS-HVA-SN-01

    Sample uptake needle for CINRG Houillon Viscometer Automation system

    SPECIFICATIONS
    Sample Needle for CS-HVA-1
       
    Sample uptake needle for CINRG Houillon Viscometer Automation system
    P/N: CS-HVA-SN-01

    $300.00 
       
  • LP Pushbutton Valve, 9/16" - 18 ORB, Viton, w/ Locknut, Steel
    LP Pushbutton Valve, 9/16" - 18 ORB, Viton, w/ Locknut, Steel

    LP Pushbutton Valve, 9/16" - 18 ORB, Viton, w/ Locknut, Steel

    $44.01
    P/N: LPL6U

    The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

       
    The KP Series Sampling valve allows for sample taking at the "push of a button".
    P/N: LPL6U

    $44.01 
       
  • High Flow L Valve, 1/4" -18 NPTF, Swivel w/ 18" SS Tube
    High Flow L Valve, 1/4" -18 NPTF, Swivel w/ 18" SS Tube

    High Flow L Valve, 1/4" -18 NPTF, Swivel w/ 18" SS Tube

    $72.53
    P/N: L14NTRS18

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NTRS18

    $72.53 
       
  • 24" Steel, 1/4" NPT, swivel (stainless tube)
    24" Steel, 1/4" NPT, swivel (stainless tube)

    24" Steel, 1/4" NPT, swivel (stainless tube)

    $85.35
    P/N: B14NTRS24

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 24", Adapter: Swivel 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range:...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: B14NTRS24

    $85.35 
       
  • Tritan Condition Monitoring Pod replacement sight glass 3/4" pods
    Tritan Condition Monitoring Pod replacement sight glass 3/4" pods

    Tritan Condition Monitoring Pod replacement sight glass 3/4" pods

    $50.00
    P/N: SG075F2PK

    Multipurpose The CMP is a multi-parameter inspection pod that greatly modernizes and expands daily one-minute inspections. Best applications include gearboxes, sumps, reservoirs and low pressure systems where high levels of reliability are critical. Revolutionary The CMP extends the capabilities of the...

    SPECIFICATIONS
    2.75" x 3.18" x 3.5" (w x h x l), Large acrylic sight glass with 1.4" diameter x 1.25" deep viewing area, Replacement sight glass only for 3/4" pods
       
    The new Condition Monitoring Pod (CMP) from Luneta is a powerful machine inspection tool that provides quick access to a variety of field lubricant tests and gives instant feedback on the condition of the lubricant and its environment.
    P/N: SG075F2PK

    $50.00 
       
  • Tritan Condition Monitoring Pod replacement sight glass 1/2" pods
    Tritan Condition Monitoring Pod replacement sight glass 1/2" pods

    Tritan Condition Monitoring Pod replacement sight glass 1/2" pods

    $50.00
    P/N: SG050F2PK

    Multipurpose The CMP is a multi-parameter inspection pod that greatly modernizes and expands daily one-minute inspections. Best applications include gearboxes, sumps, reservoirs and low pressure systems where high levels of reliability are critical. Revolutionary The CMP extends the capabilities of the...

    SPECIFICATIONS
    2.75" x 3.18" x 3.5" (w x h x l), Large acrylic sight glass with 1.4" diameter x 1.25" deep viewing area, Replacement sight glass only for 1/2" pods
       
    The new Condition Monitoring Pod (CMP) from Luneta is a powerful machine inspection tool that provides quick access to a variety of field lubricant tests and gives instant feedback on the condition of the lubricant and its environment.
    P/N: SG050F2PK

    $50.00 
       
  • LP Pushbutton Valve, 7/16" - 20 ORB w/ Lock Nut, Viton, 316 SS
    LP Pushbutton Valve, 7/16" - 20 ORB w/ Lock Nut, Viton, 316 SS

    LP Pushbutton Valve, 7/16" - 20 ORB w/ Lock Nut, Viton, 316 SS

    $113.47
    P/N: LPL4U-R

    The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

       
    The KP Series Sampling valve allows for sample taking at the "push of a button".
    P/N: LPL4U-R

    $113.47 
       
  • KP series push button sampling valve, 1/4" NPT - 18 NPTF Neoprene
    KP series push button sampling valve, 1/4" NPT - 18 NPTF Neoprene

    KP series push button sampling valve, 1/4" NPT - 18 NPTF Neoprene

    $44.36
    P/N: KPQ14NP

    The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

    SPECIFICATIONS
    Body Component: Carbon Steel, Button/Spout/Cap: Brass, Seals: Viton, Spring: Carbon Steel, Thread Size: 1/4" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
       
    The KP Series Sampling valve allows for sample taking at the "push of a button".
    P/N: KPQ14NP

    $44.36 
       
  • L High Flow Valve with 1" NPT, 3D Sight Glass, Swivel, 12"SS Tube
    L High Flow Valve with 1" NPT, 3D Sight Glass, Swivel, 12"SS Tube

    L High Flow Valve with 1" NPT, 3D Sight Glass, Swivel, 12"SS Tube

    $102.46
    P/N: L16NATRS12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 45cm Stainless Steel (12"), Adapter: 1" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L16NATRS12

    $102.46 
       
  • L High Flow Valve with 1/2" NPT, 3D Sight Glass, Swivel, 12"SS Tube
    L High Flow Valve with 1/2" NPT, 3D Sight Glass, Swivel, 12"SS Tube

    L High Flow Valve with 1/2" NPT, 3D Sight Glass, Swivel, 12"SS Tube

    $99.11
    P/N: L8NATRS12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 45cm Stainless Steel (12"), Adapter: 1/2" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L8NATRS12

    $99.11 
       
  • L High Flow Valve with 3/8" NPT, 3D Sight Glass, Swivel, 12"SS Tube
    L High Flow Valve with 3/8" NPT, 3D Sight Glass, Swivel, 12"SS Tube

    L High Flow Valve with 3/8" NPT, 3D Sight Glass, Swivel, 12"SS Tube

    $98.61
    P/N: L6NATRS12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 45cm Stainless Steel (12"), Adapter: 3/8" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L6NATRS12

    $98.61 
       
  • Vacuum Sample Pump (Vacuum Release Valve w/stand)
    Vacuum Sample Pump (Vacuum Release Valve w/stand)

    Vacuum Sample Pump (Vacuum Release Valve w/stand)

    $113.30
    P/N: SP38-97FM


    SPECIFICATIONS
    38 mm, Folding Stand
       
    These pumps will generate in excess of 27 inches of Hg, suitable for sampling of viscous fluids (i.e. oils).
    P/N: SP38-97FM

    $113.30 
       
  • Tritan Condition Monitoring Pod replacement sight glass 1, 1-1/4 and 1-1/2" pods
    Tritan Condition Monitoring Pod replacement sight glass 1, 1-1/4 and 1-1/2" pods

    Tritan Condition Monitoring Pod replacement sight glass 1, 1-1/4 and 1-1/2" pods

    $50.00
    P/N: SG10F2PK

    Multipurpose The CMP is a multi-parameter inspection pod that greatly modernizes and expands daily one-minute inspections. Best applications include gearboxes, sumps, reservoirs and low pressure systems where high levels of reliability are critical. Revolutionary The CMP extends the capabilities of the...

    SPECIFICATIONS
    2.75" x 3.18" x 3.5" (w x h x l), Large acrylic sight glass with 1.4" diameter x 1.25" deep viewing area, Replacement sight glass only for 1", 1-1/4" and 1-1/2" pods
       
    The new Condition Monitoring Pod (CMP) from Luneta is a powerful machine inspection tool that provides quick access to a variety of field lubricant tests and gives instant feedback on the condition of the lubricant and its environment.
    P/N: SG10F2PK

    $50.00 
       
  • High Flow L Valve 3/4"-16JIC Fem Swivel w/ 24" 5/16 OD SS Tube
    High Flow L Valve 3/4"-16JIC Fem Swivel w/ 24" 5/16 OD SS Tube

    High Flow L Valve 3/4"-16JIC Fem Swivel w/ 24" 5/16 OD SS Tube

    $82.05
    P/N: L8JFS5TRS24

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 24", Adapter: 3/4" - 16 JIC Fem Swivel,
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L8JFS5TRS24

    $82.05 
       
  • High Flow L Valve 3/4"-16JIC Fem Swivel w/ 36" 5/16 OD SS Tube
    High Flow L Valve 3/4"-16JIC Fem Swivel w/ 36" 5/16 OD SS Tube

    High Flow L Valve 3/4"-16JIC Fem Swivel w/ 36" 5/16 OD SS Tube

    $104.94
    P/N: L8JFS5TRS36

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 36", Adapter: 3/4" - 16 JIC Fem Swivel,
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L8JFS5TRS36

    $104.94 
       
  • High Flow L Valve 3/4"-16JIC Fem Swivel w/ 48" 5/16 OD SS Tube
    High Flow L Valve 3/4"-16JIC Fem Swivel w/ 48" 5/16 OD SS Tube

    High Flow L Valve 3/4"-16JIC Fem Swivel w/ 48" 5/16 OD SS Tube

    $127.97
    P/N: L8JFS5TRS48

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 48", Adapter: 3/4" - 16 JIC Fem Swivel,
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L8JFS5TRS48

    $127.97 
       
  • Vacuum Sample Pump
    Vacuum Sample Pump

    Vacuum Sample Pump

    $56.44
    P/N: SP32X


       
    These pumps will generate in excess of 27 inches of Hg, suitable for sampling of viscous fluids (i.e. oils).
    P/N: SP32X

    $56.44 
       
  • Sample Tray for CS-APC-2
    Sample Tray for CS-APC-2

    Sample Tray for CS-APC-2

    $1,625.04
    P/N: CS-APC-ST-01


    SPECIFICATIONS
    Sample Positions: 104 (8 x 13)
       
    Standard 104 position (8 x 13) sample tray for CINRG CS-APC-2 instrument.
    P/N: CS-APC-ST-01

    $1,625.04 
       
  • Fluid Level Sight Glass - 3/4" NPT
    Fluid Level Sight Glass - 3/4" NPT

    Fluid Level Sight Glass - 3/4" NPT

    $10.21
    P/N: SLW-12


    SPECIFICATIONS
    Thread Sizes: 3/4" NPT,
       
    Fluid Level Sight Glasses
    P/N: SLW-12

    $10.21 
       
  • 36" Stainless Steel, high flow, 1/4" NPT, swivel
    36" Stainless Steel, high flow, 1/4" NPT, swivel

    36" Stainless Steel, high flow, 1/4" NPT, swivel

    $225.85
    P/N: L14NRTRS36

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 91cm (36"), Adapter: Swivel 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless-steel, Sample Test Port: stainless-steel, Seals Standard: Viton (FPM) - EPDM, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NRTRS36

    $225.85 
       
  • Particle Count Sensor
    Particle Count Sensor

    Particle Count Sensor

    $5,750.00
    P/N: CS-LDS-4550

    A laser particle counting sensor for particle measurement in a size range of 1-200µm that works using the light blockage principle.

    SPECIFICATIONS
    Cable Length: 80 cm, Usage: Sensor for particles in liquids, also for high viscous media, Measuring Range: Water 1µm - 160µm, oil 1,5µm - 100µm after ISO (91), Flow Rate: Typically 50 ml/min (max. 100 ml/min), Max. Concentration: 25 000 particles/ml, No. of Channels: 4,096, Connecting plug...
       
    Multi-channel laser particle counting sensor for CINRG CS-APC-2 instrument.
    P/N: CS-LDS-4550

    $5,750.00 
       
  • Vacuum Sample Pump (Acrylic head)
    Vacuum Sample Pump (Acrylic head)

    Vacuum Sample Pump (Acrylic head)

    $92.36
    P/N: SP45-U


       
    These pumps will generate in excess of 27 inches of Hg, suitable for sampling of viscous fluids (i.e. oils).
    P/N: SP45-U

    $92.36 
       
  • KST series probe, 1/4" NPTF, viton, SS externals
    KST series probe, 1/4" NPTF, viton, SS externals

    KST series probe, 1/4" NPTF, viton, SS externals

    $65.99
    P/N: KST14NVR-C

    The KST Sample valves are suitable for mobile and marine applications, and their unique design makes them suitable for use with the probalizer-style vacuum sampling pump for taking rapid and accurate oil analysis samples.

    SPECIFICATIONS
    Thread Size: 1/4" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F), Seals: Viton, External: Stainless Steel
       
    The KST Series Sampling valve works hand-in-hand with the probalizer-style vacuum sample pump.
    P/N: KST14NVR-C

    $65.99 
       
  • 18" Stainless Steel, high flow, 1/4" NPT, swivel
    18" Stainless Steel, high flow, 1/4" NPT, swivel

    18" Stainless Steel, high flow, 1/4" NPT, swivel

    $198.59
    P/N: L14NRTRS18

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 45cm (18"), Adapter: Swivel 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless-steel, Sample Test Port: stainless-steel, Seals Standard: Viton (FPM) - EPDM, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NRTRS18

    $198.59 
       
  • Push Button Spout Barb
    Push Button Spout Barb

    Push Button Spout Barb

    $3.48
    P/N: KP4PT


       
    Push button spout barb for use with push button sampling valve.
    P/N: KP4PT

    $3.48 
       
  • Fluid Level Sight Glass - 1-1.4" NPT
    Fluid Level Sight Glass - 1-1.4" NPT

    Fluid Level Sight Glass - 1-1.4" NPT

    $21.58
    P/N: SLW-20


    SPECIFICATIONS
    Thread Sizes: 1-1/4" NPT, Outside Diameter: 1.20", Length from last Thread: 0.41"
       
    Fluid Level Sight Glasses
    P/N: SLW-20

    $21.58 
       
  • KP series push button sampling valve (Viton/Stainless), 1/4" NPT
    KP series push button sampling valve (Viton/Stainless), 1/4" NPT

    KP series push button sampling valve (Viton/Stainless), 1/4" NPT

    $108.98
    P/N: KP14NV-R

    The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

    SPECIFICATIONS
    Body Component: Stainless Steel, Button/Spout/Cap: Stainless, Seals: Viton, Spring: Stainless, Thread Size: 1/4" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
       
    The KP Series Sampling valve allows for sample taking at the "push of a button".
    P/N: KP14NV-R

    $108.98 
       
  • Gauge Plug - 1/4" NPT Stainless Steel
    Gauge Plug - 1/4" NPT Stainless Steel

    Gauge Plug - 1/4" NPT Stainless Steel

    $70.27
    P/N: GP14NV


    SPECIFICATIONS
    M16x2 Valve, 1/4", 18 NPTF, Viton, Stainless Steel,
       
    These high quality, brass, leak-proof gauge plugs are suitable for installation on any pressurized lubricant point.
    P/N: GP14NV

    $70.27 
       
  • KP series push button sampling valve (Viton/Stainless/Locknut), 1/4" NPT
    KP series push button sampling valve (Viton/Stainless/Locknut), 1/4" NPT

    KP series push button sampling valve (Viton/Stainless/Locknut), 1/4" NPT

    $124.13
    P/N: KPL14NV-R

    The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

    SPECIFICATIONS
    Body Component: Stainless Steel, Button/Spout/Cap: Stainless, Seals: Viton, Spring: Stainless, Thread Size: 1/4" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
       
    The KP Series Sampling valve allows for sample taking at the "push of a button".
    P/N: KPL14NV-R

    $124.13 
       
  • KP series push button sampling valve (Viton/Stainless), 1/8" NPT
    KP series push button sampling valve (Viton/Stainless), 1/8" NPT

    KP series push button sampling valve (Viton/Stainless), 1/8" NPT

    $108.98
    P/N: KP18NV-R

    The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

    SPECIFICATIONS
    Body Component: Stainless Steel, Button/Spout/Cap: Stainless, Seals: Viton, Spring: Stainless, Thread Size: 1/8" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
       
    The KP Series Sampling valve allows for sample taking at the "push of a button".
    P/N: KP18NV-R

    $108.98 
       
  • KST series probe, 1/4" NPTF, viton
    KST series probe, 1/4" NPTF, viton

    KST series probe, 1/4" NPTF, viton

    $21.82
    P/N: KST14N-VC

    The KST Sample valves are suitable for mobile and marine applications, and their unique design makes them suitable for use with the probalizer-style vacuum sampling pump for taking rapid and accurate oil analysis samples.

    SPECIFICATIONS
    Thread Size: 1/4" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F), Seals: Viton
       
    The KST Series Sampling valve works hand-in-hand with the probalizer-style vacuum sample pump.
    P/N: KST14N-VC

    $21.82 
       
  • Vacuum Sample Pump (Vacuum Release Valve)
    Vacuum Sample Pump (Vacuum Release Valve)

    Vacuum Sample Pump (Vacuum Release Valve)

    $65.32
    P/N: SP38-XV


       
    These pumps will generate in excess of 27 inches of Hg, suitable for sampling of viscous fluids (i.e. oils).
    P/N: SP38-XV

    $65.32 
       
  • Vacuum Sample Pump (Acrylic head)
    Vacuum Sample Pump (Acrylic head)

    Vacuum Sample Pump (Acrylic head)

    $80.70
    P/N: SP38-U


       
    These pumps will generate in excess of 27 inches of Hg, suitable for sampling of viscous fluids (i.e. oils).
    P/N: SP38-U

    $80.70 
       
  • LT Sample Probe with Barb for 5/16" OD Disposable Tubing
    LT Sample Probe with Barb for 5/16" OD Disposable Tubing

    LT Sample Probe with Barb for 5/16" OD Disposable Tubing

    $35.49
    P/N: SLF5


       
  • Sampling Port Extension Hose Assembly
    Sampling Port Extension Hose Assembly

    Sampling Port Extension Hose Assembly

    $79.35
    P/N: SPEHKP01


       
    P/N: SPEHKP01

    $79.35 
       
  • 12" Steel, 1/4" NPT, rigid, stainless steel
    12" Steel, 1/4" NPT, rigid, stainless steel

    12" Steel, 1/4" NPT, rigid, stainless steel

    $180.83
    P/N: B14NRTR12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 30cm (12"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: stainless steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request,...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: B14NRTR12

    $180.83 
       
  • Fluid Level Sight Glass - 1" NPT
    Fluid Level Sight Glass - 1" NPT

    Fluid Level Sight Glass - 1" NPT

    $13.78
    P/N: SLW-16


    SPECIFICATIONS
    Thread Sizes: 1" NPT, Outside Diameter: 0.94", Length from last Thread: 0.32"
       
    Fluid Level Sight Glasses
    P/N: SLW-16

    $13.78 
       
  • 14" Steel, 1/4" NPT, rigid (stainless tube)
    14" Steel, 1/4" NPT, rigid (stainless tube)

    14" Steel, 1/4" NPT, rigid (stainless tube)

    $77.39
    P/N: B14NTR24

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 30cm (24"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: B14NTR24

    $77.39 
       
  • 12" Steel, 1/4" NPT, swivel (stainless tube)
    12" Steel, 1/4" NPT, swivel (stainless tube)

    12" Steel, 1/4" NPT, swivel (stainless tube)

    $76.59
    P/N: B14NTRS12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 30cm (12"), Adapter: Swivel 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: B14NTRS12

    $76.59 
       
  • Pressureless Valve Mount 1-1/4" (for Pipe)
    Pressureless Valve Mount 1-1/4" (for Pipe)

    Pressureless Valve Mount 1-1/4" (for Pipe)

    $549.67
    P/N: VM2-P114

    Valve Mounts are an ingenious way of getting around the conundrum of sampling from the system return line. On pressurized systems with a reservoir the recommendation is to sample from the return line. The irony is that the return line is, in almost all instances, devoid of any ports, or an easy place to...

    SPECIFICATIONS
    Pipe Opening: 1-1/4", Height: 4.72" (120 mm), Width: 2.56" (65 mm), Housing: Steel, Sealing Shell: Steel, Seal: Viton, Measuring Needle: Steel, Maximum Operating Pressure: 9000 PSI, Maximum Sampling Pressure: 6000 PSI, Pipe Requirements Seamless drawn steel pipes made out of ST...
       
    Valve Mounts allow for the easy installation of a sampling port on existing return lines.
    P/N: VM2-P114

    $549.67 
       
  • KP series push button sampling valve
    KP series push button sampling valve

    KP series push button sampling valve

    $69.95
    P/N: KP022

    The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

    SPECIFICATIONS
    Body Component: Carbon Steel, Button/Spout/Cap: Brass, Seals: Viton, Spring: Carbon Steel, Thread Size: 1/8" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
       
    The KP Series Sampling valve allows for sample taking at the "push of a button".
    P/N: KP022

    $69.95 
       
  • Gauge Plug - 1/4" NPT (Stainless Steel)
    Gauge Plug - 1/4" NPT (Stainless Steel)

    Gauge Plug - 1/4" NPT (Stainless Steel)

    $62.81
    P/N: B14N-R


    SPECIFICATIONS
    max pressure: 9000 PSI, material: stainless steel, o-rings: nitrile, thread size: 1/4" NPT
       
    These high quality, leak-proof gauge plugs are suitable for installation on any pressurized lubricant point.
    P/N: B14N-R

    $62.81 
       
  • 36" Stainless Steel, high flow, 1/4" NPT, rigid
    36" Stainless Steel, high flow, 1/4" NPT, rigid

    36" Stainless Steel, high flow, 1/4" NPT, rigid

    $204.27
    P/N: L14NRTR36

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 90cm (36"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless-steel, Sample Test Port: stainless-steel, Seals Standard: Viton (FPM) - EPDM, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NRTR36

    $204.27 
       
  • 24" Stainless Steel, high flow, 1/4" NPT, rigid
    24" Stainless Steel, high flow, 1/4" NPT, rigid

    24" Stainless Steel, high flow, 1/4" NPT, rigid

    $181.38
    P/N: L14NRTR24

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 60cm (24"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless-steel, Sample Test Port: stainless-steel, Seals Standard: Viton (FPM) - EPDM, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NRTR24

    $181.38 
       
  • 18" Stainless Steel, high flow, 1/4" NPT, rigid
    18" Stainless Steel, high flow, 1/4" NPT, rigid

    18" Stainless Steel, high flow, 1/4" NPT, rigid

    $177.01
    P/N: L14NRTR18

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 45cm (18"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless-steel, Sample Test Port: stainless-steel, Seals Standard: Viton (FPM) - EPDM, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NRTR18

    $177.01 
       
  • 12" Stainless Steel, high flow, 1/4" NPT, rigid
    12" Stainless Steel, high flow, 1/4" NPT, rigid

    12" Stainless Steel, high flow, 1/4" NPT, rigid

    $172.63
    P/N: L14NRTR12

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 30cm (12"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless-steel, Sample Test Port: stainless-steel, Seals Standard: Viton (FPM) - EPDM, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NRTR12

    $172.63 
       
  • Oil Sample Service Kit
    Oil Sample Service Kit

    Oil Sample Service Kit

    $117.60
    P/N: OA-SRVC-K1

    The Lubrigard Oil Sampling Service Kit is the complete solution for your portable oil sampling needs. Simply add your oil analysis samples kits to this durable travel case and you have everything you need to take oil samples in the field.

       
    The oil sampling service kit comes complete with a sampling pump, pump case, 24 feet of tubing, and a tubing cutter all in a portable and durable industrial plastic case.
    P/N: OA-SRVC-K1

    $117.60 
       
  • Dipslide Culture Test Kits (10 tests)
    Dipslide Culture Test Kits (10 tests)

    Dipslide Culture Test Kits (10 tests)

    $34.54
    P/N: MC-600

    Microorganisms are responsible for enormous economic losses to industry. Microorganisms and their metabolic products accumulate in water, transportation fuels, petroleum products and industrial fluids resulting in alteration of their physical and chemical properties. This can cause obstruction of fluid...

    SPECIFICATIONS
    Number of Test Kits: 10, Media: Nutrient Agar w/TTC /MALT EXTRACT AGAR
       
    Dipslide Culture Test kits - Nutrient Agar - TTC Malt Extract Agar.
    P/N: MC-600

    $34.54 
       
  • Hi-pressure crimped hose with vent cap
    Hi-pressure crimped hose with vent cap

    Hi-pressure crimped hose with vent cap

    $49.75
    P/N: VHBF


    SPECIFICATIONS
    B Series M16x2 High Pressure Probe Assembly, 250 psi to 3,500 psi
       
    For use with all standard Pitot tubes
    P/N: VHBF

    $49.75 
       
  • Tube Cutter (1/8" - 1-1/8")
    Tube Cutter (1/8" - 1-1/8")

    Tube Cutter (1/8" - 1-1/8")

    $43.27
    P/N: TC-1000


       
    For use with all standard Pitot tubes
    P/N: TC-1000

    $43.27 
       
  • Mini Tube Cutter (1/8" - 5/8")
    Mini Tube Cutter (1/8" - 5/8")

    Mini Tube Cutter (1/8" - 5/8")

    $21.16
    P/N: TC-1050


       
    Tube cutter for use with standard pitot tubes. Will cut 1/8" - 5/8" tubing.
    P/N: TC-1050

    $21.16 
       
  • 18" Steel, high flow, 1/4" NPT, swivel
    18" Steel, high flow, 1/4" NPT, swivel

    18" Steel, high flow, 1/4" NPT, swivel

    $61.20
    P/N: L14NTS18

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 45cm (18"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to +392°F)
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: L14NTS18

    $61.20 
       
  • 18" Steel, 1/4" NPT, rigid
    18" Steel, 1/4" NPT, rigid

    18" Steel, 1/4" NPT, rigid

    $55.68
    P/N: B14NT18

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 45cm (18"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request,...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: B14NT18

    $55.68 
       
  • 18" Steel, 1/4" NPT, swivel
    18" Steel, 1/4" NPT, swivel

    18" Steel, 1/4" NPT, swivel

    $71.99
    P/N: B14NTS18

    Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

    SPECIFICATIONS
    Pitot Tube Length: 45cm (18"), pter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature...
       
    Lubrigard Pitot Tube sampling ports are designed to provide you with a safe, simple and effective method of sampling your fluids from sumps and non-flooded horizontal drain lines. The thick walled tubing can be bent and directed to the
    P/N: B14NTS18

    $71.99 
       
 
  •  
  •  
Sample Bottle

Sample Bottle

$0.75
P/N: CBP100


   
Sample Tubing (1/4" O.D.)

Sample Tubing (1/4" O.D.)

$0.37
P/N: PT44

This sample tubing can be used with all Lubrigard vacuum sample pumps, and with other sampling hardware that requires replaceable plastic tubing.

   
Sample Mailer Container & Sample Bottle

Sample Mailer Container & Sample Bottle

$2.59
P/N: BLC1


SPECIFICATIONS
Mailing container and 100 mL oil sampling bottle.
   
Vacuum Sample Pump

Vacuum Sample Pump

$29.78
P/N: SP38


   
24" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Swivel

24" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Swivel

$76.90
P/N: L14NTRS24

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: Stainless Steel (24"), Adapter: Swivel 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to...
   
Lo-Pressure sampling hose (Hi-Visc)

Lo-Pressure sampling hose (Hi-Visc)

$32.25
P/N: SLF4


   
Sample Tubing (3/16" O.D.)

Sample Tubing (3/16" O.D.)

$0.50
P/N: PT33

This sample tubing can be used with all Lubrigard vacuum sample pumps, and with other sampling hardware that requires replaceable plastic tubing.

   
Hi-pressure Sampling Hose

Hi-pressure Sampling Hose

$15.82
P/N: SHHP01


   
12" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

12" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

$58.98
P/N: L14NTR12

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 45cm Stainless Steel (12"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to...
   
Gauge Plug - 1/4" NPT

Gauge Plug - 1/4" NPT

$13.10
P/N: GP14


SPECIFICATIONS
max pressure: 9000 PSI, materials:, Metal Parts: Steel, Ball: Stainless Steel, Seals: Standard FPM-Viton Temperatur Range -4°F to +392°F (-20°C to +200°C), thread size: 1/4" NPT
   
12" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Swivel

12" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Swivel

$68.16
P/N: L14NTRS12

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: Stainless Steel (12"), Adapter: Swivel 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to...
   
18" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

18" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

$63.36
P/N: L14NTR18

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 45cm Stainless Steel (18"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to...
   
KP series push button sampling valve, 1/4" NPT

KP series push button sampling valve, 1/4" NPT

$31.11
P/N: KP14N

The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

SPECIFICATIONS
Body Component: Carbon Steel, Button/Spout/Cap: Brass, Seals: Viton, Spring: Carbon Steel, Thread Size: 1/4" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
   
Gauge Plug - 1/8" NPT

Gauge Plug - 1/8" NPT

$13.10
P/N: GP18


SPECIFICATIONS
max pressure: 9000 PSI, materials:, Metal Parts: Steel, Ball: Stainless Steel, Seals: Standard FPM-Viton Temperatur Range -4°F to +392°F (-20°C to +200°C), thread size: 1/8" NPT
   
1/4"B Thread Together Probe w/1/4"Tubing

1/4"B Thread Together Probe w/1/4"Tubing

$13.97
P/N: SBF4


   
KP series push button sampling valve, 1/8" NPT

KP series push button sampling valve, 1/8" NPT

$31.11
P/N: KP18N

The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

SPECIFICATIONS
Body Component: Carbon Steel, Button/Spout/Cap: Brass, Seals: Viton, Spring: Carbon Steel, Thread Size: 1/8" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
   
L Series hi-viscosity, 1/4" NPT

L Series hi-viscosity, 1/4" NPT

$28.77
P/N: L14NC


   
3-way stop-cock

3-way stop-cock

$3.50
P/N: POP96652


   
30cc Matched and Serialized Glass Syringe

30cc Matched and Serialized Glass Syringe

$105.20
P/N: POP5147


   
Lo-pressure Sampling Hose

Lo-pressure Sampling Hose

$18.35
P/N: SHLP01


   
Vacuum Sample Pump

Vacuum Sample Pump

$25.39
P/N: SP38PR

This pump will generate in excess of 27 inches of Hg, suitable for sampling of viscous fluids (i.e. oils), and is equipped with a probalyzer style needle valve suitable for sampling from pressurized components equipped with the mini-gauge plug.

   
Gearbox Adapter Body Only

Gearbox Adapter Body Only

$64.55
P/N: 10001240


SPECIFICATIONS
Gearbox Adapter Body Only
   
KST series probe, 1/8" NPTF

KST series probe, 1/8" NPTF

$21.82
P/N: KST18N

The KST Sample valves are suitable for mobile and marine applications, and their unique design makes them suitable for use with the probalizer-style vacuum sampling pump for taking rapid and accurate oil analysis samples.

SPECIFICATIONS
Thread Size: 1/8" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
   
24" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

24" Stainless Steel Tube, High Flow L , 1/4" NPT, Viton, Rigid

$67.74
P/N: L14NTR24

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: Stainless Steel 24", Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to +392°F)
   
12" Steel, 1/4" NPT, rigid (stainless tube)

12" Steel, 1/4" NPT, rigid (stainless tube)

$62.20
P/N: B14NTR12

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 30cm (12"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature...
   
48" Steel, 1/4" NPT, rigid (Stainless Tube)

48" Steel, 1/4" NPT, rigid (Stainless Tube)

$116.87
P/N: B14NTR48

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 48", Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range:...
   
24" Steel, 1/4" NPT, rigid

24" Steel, 1/4" NPT, rigid

$57.06
P/N: B14NT24

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 60cm (24"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request,...
   
12" Steel, high flow, 1/4" NPT Thread, Rigid, 5/16 OD SS Tube

12" Steel, high flow, 1/4" NPT Thread, Rigid, 5/16 OD SS Tube

$70.78
P/N: L14N5TR12

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 30cm (12"), Adapter: Fixed 1/4" Male NPT, OD: 5/16", Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F...
   
Mini Gauge Plug - 1/8" NPT

Mini Gauge Plug - 1/8" NPT

$45.00
P/N: GP18PR


SPECIFICATIONS
max pressure: 9000 PSI, material: cadmium coated mild steel, thread size: 1/8" NPT, NOTE: PUMP NOT INCLUDED
   
KST series probe, 1/4" NPTF

KST series probe, 1/4" NPTF

$21.82
P/N: KST14N

The KST Sample valves are suitable for mobile and marine applications, and their unique design makes them suitable for use with the probalizer-style vacuum sampling pump for taking rapid and accurate oil analysis samples.

SPECIFICATIONS
Thread Size: 1/4" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
   
12" Steel, 1/4" NPT, swivel

12" Steel, 1/4" NPT, swivel

$68.69
P/N: B14NTS12

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 30cm (12"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request,...
   
Hi-pressure Sampling System with Needle Valve

Hi-pressure Sampling System with Needle Valve

$144.37
P/N: SHHPNV01

The Lubrigard Hi-pressure Sampling System incorporates a needle valve into the sampling line to allow metering of the pressure at the sample side. This system is very useful for sampling systems with variable high pressures (i.e. injection moulding, presses).

   
L High Flow Valve with 3/4" NPT, 3D Sight Glass, Swivel, 12"SS Tube

L High Flow Valve with 3/4" NPT, 3D Sight Glass, Swivel, 12"SS Tube

$100.54
P/N: L12NATRS12

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 45cm Stainless Steel (12"), Adapter: 3/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to +392°F)
   
36" Stainless Steel, 1/4" NPT, rigid

36" Stainless Steel, 1/4" NPT, rigid

$99.06
P/N: B14NTR36

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 36", Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range:...
   
24" Stainless Steel, high flow, 1/4" NPT, swivel

24" Stainless Steel, high flow, 1/4" NPT, swivel

$202.95
P/N: L14NRTRS24

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 61cm (24"), Adapter: Swivel 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless-steel, Sample Test Port: stainless-steel, Seals Standard: Viton (FPM) - EPDM, Temperature Range: -20°C to +200°C (-4°F to +392°F)
   
1/4" Swivel Handle Tube Bender (LT-Series)

1/4" Swivel Handle Tube Bender (LT-Series)

$91.11
P/N: PTB01


   
24" Steel, 1/4" NPT, swivel

24" Steel, 1/4" NPT, swivel

$73.36
P/N: B14NTS24

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 60cm (24"), pter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature...
   
12" Stainless Steel, high flow, 1/4" NPT, swivel

12" Stainless Steel, high flow, 1/4" NPT, swivel

$194.21
P/N: L14NRTRS12

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 30cm (12"), Adapter: 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless-steel, Sample Test Port: stainless-steel, Seals Standard: Viton (FPM) - EPDM, Temperature Range: -20°C to +200°C (-4°F to +392°F)
   
Vacuum Sample Pump

Vacuum Sample Pump

$92.36
P/N: SP48U


   
Disposable probe tube cap

Disposable probe tube cap

$2.52
P/N: SVP

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 30cm (12"),
   
KST series probe

KST series probe

$9.24
P/N: KPB4


   
Fluid Level Sight Glass - 1/2" NPT

Fluid Level Sight Glass - 1/2" NPT

$9.27
P/N: SLW-08


SPECIFICATIONS
Thread Sizes: 1/2" NPT,
   
M Series M16x2 Probe Adapter with Barb for 1/4" OD Disposable Tubing

M Series M16x2 Probe Adapter with Barb for 1/4" OD Disposable Tubing

$32.25
P/N: SMF4


   
Motor Control Board, Dual (SMCB2)

Motor Control Board, Dual (SMCB2)

$804.53
P/N: CS-MCB2

CS-APC-2 Genuine Spare Parts

SPECIFICATIONS
Motor control board for CINRG CS-APC-2 syringe pump.
   
VITON TUBING  1/4" OD 1/8" ID  (1 foot)

VITON TUBING  1/4" OD 1/8" ID (1 foot)

$7.75
P/N: CS-T1418-1

CS-APC-2 Genuine Spare Parts

SPECIFICATIONS
Sample Needle for CS-HVA-1
   
PTFE TUBING 1/8" ID X 0.085" ID (25FT x 2.15MM)

PTFE TUBING 1/8" ID X 0.085" ID (25FT x 2.15MM)

$95.40
P/N: CS-T18085-25

CS-APC-2 Genuine Spare Parts

SPECIFICATIONS
Sample Needle for CS-HVA-1
   
FLANGED NUT/WASHER 1/8" (10 PIECES)

FLANGED NUT/WASHER 1/8" (10 PIECES)

$46.32
P/N: CS-W18-10

CS-APC-2 Genuine Spare Parts

SPECIFICATIONS
Sample Needle for CS-HVA-1
   
25ml SYRINGE

25ml SYRINGE

$1,272.00
P/N: CS-S25

CS-APC-2 Genuine Spare Parts

SPECIFICATIONS
Sample Needle for CS-HVA-1
   
24V DC Motor and Gearbox Combination

24V DC Motor and Gearbox Combination

$333.52
P/N: CS-M24GB

CS-APC-2 Genuine Spare Parts

SPECIFICATIONS
Sample Needle for CS-HVA-1
   
Sample Needle for CS-HVA-1

Sample Needle for CS-HVA-1

$300.00
P/N: CS-HVA-SN-01

Sample uptake needle for CINRG Houillon Viscometer Automation system

SPECIFICATIONS
Sample Needle for CS-HVA-1
   
LP Pushbutton Valve, 9/16" - 18 ORB, Viton, w/ Locknut, Steel

LP Pushbutton Valve, 9/16" - 18 ORB, Viton, w/ Locknut, Steel

$44.01
P/N: LPL6U

The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

   
High Flow L Valve, 1/4" -18 NPTF, Swivel w/ 18" SS Tube

High Flow L Valve, 1/4" -18 NPTF, Swivel w/ 18" SS Tube

$72.53
P/N: L14NTRS18

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

   
24" Steel, 1/4" NPT, swivel (stainless tube)

24" Steel, 1/4" NPT, swivel (stainless tube)

$85.35
P/N: B14NTRS24

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 24", Adapter: Swivel 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range:...
   
Tritan Condition Monitoring Pod replacement sight glass 3/4" pods

Tritan Condition Monitoring Pod replacement sight glass 3/4" pods

$50.00
P/N: SG075F2PK

Multipurpose The CMP is a multi-parameter inspection pod that greatly modernizes and expands daily one-minute inspections. Best applications include gearboxes, sumps, reservoirs and low pressure systems where high levels of reliability are critical. Revolutionary The CMP extends the capabilities of the...

SPECIFICATIONS
2.75" x 3.18" x 3.5" (w x h x l), Large acrylic sight glass with 1.4" diameter x 1.25" deep viewing area, Replacement sight glass only for 3/4" pods
   
Tritan Condition Monitoring Pod replacement sight glass 1/2" pods

Tritan Condition Monitoring Pod replacement sight glass 1/2" pods

$50.00
P/N: SG050F2PK

Multipurpose The CMP is a multi-parameter inspection pod that greatly modernizes and expands daily one-minute inspections. Best applications include gearboxes, sumps, reservoirs and low pressure systems where high levels of reliability are critical. Revolutionary The CMP extends the capabilities of the...

SPECIFICATIONS
2.75" x 3.18" x 3.5" (w x h x l), Large acrylic sight glass with 1.4" diameter x 1.25" deep viewing area, Replacement sight glass only for 1/2" pods
   
LP Pushbutton Valve, 7/16" - 20 ORB w/ Lock Nut, Viton, 316 SS

LP Pushbutton Valve, 7/16" - 20 ORB w/ Lock Nut, Viton, 316 SS

$113.47
P/N: LPL4U-R

The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

   
KP series push button sampling valve, 1/4" NPT - 18 NPTF Neoprene

KP series push button sampling valve, 1/4" NPT - 18 NPTF Neoprene

$44.36
P/N: KPQ14NP

The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

SPECIFICATIONS
Body Component: Carbon Steel, Button/Spout/Cap: Brass, Seals: Viton, Spring: Carbon Steel, Thread Size: 1/4" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
   
L High Flow Valve with 1" NPT, 3D Sight Glass, Swivel, 12"SS Tube

L High Flow Valve with 1" NPT, 3D Sight Glass, Swivel, 12"SS Tube

$102.46
P/N: L16NATRS12

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 45cm Stainless Steel (12"), Adapter: 1" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to +392°F)
   
L High Flow Valve with 1/2" NPT, 3D Sight Glass, Swivel, 12"SS Tube

L High Flow Valve with 1/2" NPT, 3D Sight Glass, Swivel, 12"SS Tube

$99.11
P/N: L8NATRS12

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 45cm Stainless Steel (12"), Adapter: 1/2" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to +392°F)
   
L High Flow Valve with 3/8" NPT, 3D Sight Glass, Swivel, 12"SS Tube

L High Flow Valve with 3/8" NPT, 3D Sight Glass, Swivel, 12"SS Tube

$98.61
P/N: L6NATRS12

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 45cm Stainless Steel (12"), Adapter: 3/8" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: coated steel, Sample Test Port: coated steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature Range: -20°C to +200°C (-4°F to +392°F)
   
Vacuum Sample Pump (Vacuum Release Valve w/stand)

Vacuum Sample Pump (Vacuum Release Valve w/stand)

$113.30
P/N: SP38-97FM


SPECIFICATIONS
38 mm, Folding Stand
   
Tritan Condition Monitoring Pod replacement sight glass 1, 1-1/4 and 1-1/2" pods

Tritan Condition Monitoring Pod replacement sight glass 1, 1-1/4 and 1-1/2" pods

$50.00
P/N: SG10F2PK

Multipurpose The CMP is a multi-parameter inspection pod that greatly modernizes and expands daily one-minute inspections. Best applications include gearboxes, sumps, reservoirs and low pressure systems where high levels of reliability are critical. Revolutionary The CMP extends the capabilities of the...

SPECIFICATIONS
2.75" x 3.18" x 3.5" (w x h x l), Large acrylic sight glass with 1.4" diameter x 1.25" deep viewing area, Replacement sight glass only for 1", 1-1/4" and 1-1/2" pods
   
High Flow L Valve 3/4"-16JIC Fem Swivel w/ 24" 5/16 OD SS Tube

High Flow L Valve 3/4"-16JIC Fem Swivel w/ 24" 5/16 OD SS Tube

$82.05
P/N: L8JFS5TRS24

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 24", Adapter: 3/4" - 16 JIC Fem Swivel,
   
High Flow L Valve 3/4"-16JIC Fem Swivel w/ 36" 5/16 OD SS Tube

High Flow L Valve 3/4"-16JIC Fem Swivel w/ 36" 5/16 OD SS Tube

$104.94
P/N: L8JFS5TRS36

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 36", Adapter: 3/4" - 16 JIC Fem Swivel,
   
High Flow L Valve 3/4"-16JIC Fem Swivel w/ 48" 5/16 OD SS Tube

High Flow L Valve 3/4"-16JIC Fem Swivel w/ 48" 5/16 OD SS Tube

$127.97
P/N: L8JFS5TRS48

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 48", Adapter: 3/4" - 16 JIC Fem Swivel,
   
Vacuum Sample Pump

Vacuum Sample Pump

$56.44
P/N: SP32X


   
Sample Tray for CS-APC-2

Sample Tray for CS-APC-2

$1,625.04
P/N: CS-APC-ST-01


SPECIFICATIONS
Sample Positions: 104 (8 x 13)
   
Fluid Level Sight Glass - 3/4" NPT

Fluid Level Sight Glass - 3/4" NPT

$10.21
P/N: SLW-12


SPECIFICATIONS
Thread Sizes: 3/4" NPT,
   
36" Stainless Steel, high flow, 1/4" NPT, swivel

36" Stainless Steel, high flow, 1/4" NPT, swivel

$225.85
P/N: L14NRTRS36

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 91cm (36"), Adapter: Swivel 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless-steel, Sample Test Port: stainless-steel, Seals Standard: Viton (FPM) - EPDM, Temperature Range: -20°C to +200°C (-4°F to +392°F)
   
Particle Count Sensor

Particle Count Sensor

$5,750.00
P/N: CS-LDS-4550

A laser particle counting sensor for particle measurement in a size range of 1-200µm that works using the light blockage principle.

SPECIFICATIONS
Cable Length: 80 cm, Usage: Sensor for particles in liquids, also for high viscous media, Measuring Range: Water 1µm - 160µm, oil 1,5µm - 100µm after ISO (91), Flow Rate: Typically 50 ml/min (max. 100 ml/min), Max. Concentration: 25 000 particles/ml, No. of Channels: 4,096, Connecting plug...
   
Vacuum Sample Pump (Acrylic head)

Vacuum Sample Pump (Acrylic head)

$92.36
P/N: SP45-U


   
KST series probe, 1/4" NPTF, viton, SS externals

KST series probe, 1/4" NPTF, viton, SS externals

$65.99
P/N: KST14NVR-C

The KST Sample valves are suitable for mobile and marine applications, and their unique design makes them suitable for use with the probalizer-style vacuum sampling pump for taking rapid and accurate oil analysis samples.

SPECIFICATIONS
Thread Size: 1/4" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F), Seals: Viton, External: Stainless Steel
   
18" Stainless Steel, high flow, 1/4" NPT, swivel

18" Stainless Steel, high flow, 1/4" NPT, swivel

$198.59
P/N: L14NRTRS18

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 45cm (18"), Adapter: Swivel 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless-steel, Sample Test Port: stainless-steel, Seals Standard: Viton (FPM) - EPDM, Temperature Range: -20°C to +200°C (-4°F to +392°F)
   
Push Button Spout Barb

Push Button Spout Barb

$3.48
P/N: KP4PT


   
Fluid Level Sight Glass - 1-1.4" NPT

Fluid Level Sight Glass - 1-1.4" NPT

$21.58
P/N: SLW-20


SPECIFICATIONS
Thread Sizes: 1-1/4" NPT, Outside Diameter: 1.20", Length from last Thread: 0.41"
   
KP series push button sampling valve (Viton/Stainless), 1/4" NPT

KP series push button sampling valve (Viton/Stainless), 1/4" NPT

$108.98
P/N: KP14NV-R

The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

SPECIFICATIONS
Body Component: Stainless Steel, Button/Spout/Cap: Stainless, Seals: Viton, Spring: Stainless, Thread Size: 1/4" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
   
Gauge Plug - 1/4" NPT Stainless Steel

Gauge Plug - 1/4" NPT Stainless Steel

$70.27
P/N: GP14NV


SPECIFICATIONS
M16x2 Valve, 1/4", 18 NPTF, Viton, Stainless Steel,
   
KP series push button sampling valve (Viton/Stainless/Locknut), 1/4" NPT

KP series push button sampling valve (Viton/Stainless/Locknut), 1/4" NPT

$124.13
P/N: KPL14NV-R

The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

SPECIFICATIONS
Body Component: Stainless Steel, Button/Spout/Cap: Stainless, Seals: Viton, Spring: Stainless, Thread Size: 1/4" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
   
KP series push button sampling valve (Viton/Stainless), 1/8" NPT

KP series push button sampling valve (Viton/Stainless), 1/8" NPT

$108.98
P/N: KP18NV-R

The KP Sample valves are suitable for all applications, and there simplicity of use make them popular. Take an oil sample simply by pushing a button.

SPECIFICATIONS
Body Component: Stainless Steel, Button/Spout/Cap: Stainless, Seals: Viton, Spring: Stainless, Thread Size: 1/8" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F)
   
KST series probe, 1/4" NPTF, viton

KST series probe, 1/4" NPTF, viton

$21.82
P/N: KST14N-VC

The KST Sample valves are suitable for mobile and marine applications, and their unique design makes them suitable for use with the probalizer-style vacuum sampling pump for taking rapid and accurate oil analysis samples.

SPECIFICATIONS
Thread Size: 1/4" NPT, Sampling Pressure Range: 5 psi to 750 psi, Max operating pressure: 6,000 psi, Max burst pressure: 24,000 psi, Viton seal temperature: -26C to 204C (-15F to 400F), Seals: Viton
   
Vacuum Sample Pump (Vacuum Release Valve)

Vacuum Sample Pump (Vacuum Release Valve)

$65.32
P/N: SP38-XV


   
Vacuum Sample Pump (Acrylic head)

Vacuum Sample Pump (Acrylic head)

$80.70
P/N: SP38-U


   
LT Sample Probe with Barb for 5/16" OD Disposable Tubing

LT Sample Probe with Barb for 5/16" OD Disposable Tubing

$35.49
P/N: SLF5


   
Sampling Port Extension Hose Assembly

Sampling Port Extension Hose Assembly

$79.35
P/N: SPEHKP01


   
12" Steel, 1/4" NPT, rigid, stainless steel

12" Steel, 1/4" NPT, rigid, stainless steel

$180.83
P/N: B14NRTR12

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 30cm (12"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: stainless steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request,...
   
Fluid Level Sight Glass - 1" NPT

Fluid Level Sight Glass - 1" NPT

$13.78
P/N: SLW-16


SPECIFICATIONS
Thread Sizes: 1" NPT, Outside Diameter: 0.94", Length from last Thread: 0.32"
   
14" Steel, 1/4" NPT, rigid (stainless tube)

14" Steel, 1/4" NPT, rigid (stainless tube)

$77.39
P/N: B14NTR24

Taking representative oil samples from lubricated components is often very difficult using standard sampling techniques. Sump samples at the drain plug gather excessive contamination that create exaggerated, non-reflective analysis results. Inserting a flexible tube freely or attached to a rigid component...

SPECIFICATIONS
Pitot Tube Length: 30cm (24"), Adapter: Fixed 1/4" Male NPT, Maximum working pressure: 500 PSI (34.5bar), Metal Parts: stainless steel, Sample Test Port: coated steel, Check Ball in sample test port: stainless steel, Seals Standard: Viton (FPM) - EPDM, NBR-BUNA upon request, Temperature...